Motion - Web Changes

200 recent changes in Motion Web retrieved at 06:36 (GMT)

ConfigOptionPpm
The recommendation is to always use jpg except if you have a specific need to store high quality pictures without any quality loss. For web cameras you should alw...
ConfigOptionPgsqlPort
PostgreSQL CONFIG FILE OPTION. Motion must be built with PostgreSQL libraries to use this feature.
ConfigOptionOutputNormal
If you set the value to 'first' Motion saves only the first motion detected picture per event. If you set it to "best" Motion saves the picture with most changed ...
ConfigOptionOutputMotion
Motion images shows the motion content of the pictures. This is good for tuning and testing but probably not very interesting for the general public. Default is n...
ConfigOptionOutputAll
This feature is not meant to be the normal mode of operation. Especially not if you have the output_normal or output_motion features enabled since it will keep on...
ConfigOptionNetcamHttp
* 1.0: the historical implementation using HTTP/1.0, closing the socket after each http request. * keep_alive: Use HTTP/1.0 requests with keep alive header to ...
ConfigOptionPgsqlUser
PostgreSQL CONFIG FILE OPTION. Motion must be built with PostgreSQL libraries to use this feature.
ConfigOptionPgsqlPassword
PostgreSQL CONFIG FILE OPTION. Motion must be built with PostgreSQL libraries to use this feature
ConfigOptionPgsqlHost
PostgreSQL CONFIG FILE OPTION. Motion must be built with pgsql_db libraries to use this feature.
ConfigOptionPgsqlDb
PostgreSQL CONFIG FILE OPTION. Motion must be built with PostgreSQL libraries to use this feature. If you compiled motion with PostgreSQL support you will need to...
ConfigOptionMysqlUser
MySQL CONFIG FILE OPTION. Motion must be built with MySQL libraries to use this feature
ConfigOptionMysqlPassword
MySQL CONFIG FILE OPTION. Motion must be built with MySQL libraries to use this feature.
ConfigOptionMysqlDb
MySQL CONFIG FILE OPTION. Motion must be built with MySQL libraries to use this feature. If you compiled motion with MySQL support you will need to set the mysql ...
ConfigOptionMysqlHost
MySQL CONFIG FILE OPTION. Motion must be built with MySQL libraries to use this feature
ConfigOptionLocate
The value 'preview' only works when 'output_normal' is set to either 'first' or 'best'.
ConfigOptionJpegFilename
Default value is equivalent to legacy 'oldlayout' option. For Motion 3.0 compatible mode (directories based on date and time) choose: %Y/%m/%d/%H/%M/%S %q This op...
ConfigOptionGap
Recommended value is 60 seconds (Default). The value 0 is allowed (but not recommended) and disables events causing all Motion to be written to one single mpeg fi...
ConfigOptionFfmpegFilename
Default value is equivalent to legacy 'oldlayout' option For Motion 3.0 compatible mode (directories based on date and time) choose: %Y/%m/%d/%H%M%S File extensio...
ConfigOptionFfmpegDeinterlace
To use this feature you need to install the FFmpeg Streaming Multimedia System Must not be included in config file without having ffmpeg installed.
ConfigOptionFfmpegCapNew
Generates a new film at the beginning of each new event and appends to the film for each motion detected within the same event. The current event ends when the ti...
ConfigOptionFfmpegCapMotion
Works like ffmpeg_cap_new but outputs motion pixel type pictures instead. This feature generates the special motion type movie where you only see the pixels that ...
ConfigOptionControlPort
This sets the TCP/IP port number to be used for control of motion using http (browser). Port numbers below 1024 normally requires that you have root privileges. P...
ConfigOptionControlLocalhost
By setting this to on, the control using http (browser) can only be accessed on the same machine on which Motion is running.
ConfigOptionControlAuthentication
By setting this to on, the control using http (browser) can only be accessed using login and password ( following the Basic Authentication defined in HTTP RFC )
ConfigOptionControlHtmlOutput
The recommended value for most is "on" which means that you can navigate and control Motion with a normal browser. By setting this option to "off" the replies are...
CaptureDeviceOptions
Capture Device Options The Basic Setup Before you can start using motion you need to know some basics about your camera. Either you have a camera connected dire...
SupportQuestion2016x08x03x133804
Question I just bought a simple network camera, the TP Link NC200 (UN). I managed to discover the still images and am able to download them using wget. I tried to...
NEW - 03 Aug 2016 - 14:50 by SvenWallage
SupportQuestion2016x07x29x173843
Question I am seeing corrupted images triggering motion detection. It does not always happen and not easy to reproduce, but it does trigger motion detection and I...
NEW - 29 Jul 2016 - 17:46 by MishaBirman
FeatureRequest2016x07x15x000534
Feature Request: Description I have problems with changing light conditions that I haven't been able to solve using the current setting options including use of...
r2 - 15 Jul 2016 - 11:03 by HansPalm
ActiveX
Main.JaimeCataà ±o 10 Jul 2016
NEW - 10 Jul 2016 - 05:42 by JaimeCataño
BugReport2006x12x18x192713
BUG: Since I have changed some config in my wireless setting, my IPcam (Dlink 2100 ) sometimes disconnect and reconnect to the wireless network. Motion detects t...
r9 - 30 Jun 2016 - 00:12 by PhilipWalden
SupportQuestion2016x06x29x074837
Question Hi, I want to use Motion Stream URL in WebGL Context Three.js. But, I can't because it seems Motion Web Server doesn't support CORS feature itself. So ...
NEW - 29 Jun 2016 - 07:52 by KimMinSu
FeatureRequest2015x05x03x111423
Feature Request: Description I would like to be able to specify one or more filename which is read every x frames, and then be able to add them to, for instance...
r2 - 28 Jun 2016 - 16:58 by JeremyMJ
BugReport2016x06x23x135630
BUG: #MySpecs motion Version 3.2.12 git20140228 Python 3.4.2 Raspberry Pi 3 model B Topic alredy opened on Mar 30, 2014 here https://www.raspberrypi.org/forums/v...
NEW - 23 Jun 2016 - 14:22 by SimoneRiccardi
FeatureRequest2006x03x07x190118
Feature Request: Description I'd like to have the option of specifying a name for each thread which could be incorporated into strings (filenames etc) as an al...
r4 - 13 Jun 2016 - 09:23 by DickMiddleton
SupportQuestion2016x06x12x113740
Question I am trying to connect to motion stream via ipv6. ipv4 with VLC works fine. How do I need to set the address in VLC/Chromium ? http:// fd00:xxxx:xxx:xxxx...
NEW - 12 Jun 2016 - 11:57 by JanSundermeyer
SupportQuestion2016x06x06x194128
Question I recently purchased a Zmodo DVR (ZMD DX SIN8). It has H.264 video available on Port 9000 and can connect up to 8 cameras. I searched this Wiki but I d...
NEW - 06 Jun 2016 - 19:49 by BillS
FeatureRequest2012x07x13x131211
Feature Request: Description I have noticed that motion often false activate recording when it capture huge light change. For example at sunrises and sunsets. I...
r2 - 30 May 2016 - 16:36 by DmitryK
FeatureRequest2015x09x13x171314
Feature Request: Description I #39;d like to have the option to save motion files as mp4. Main.NiekHombrouckx 13 Sep 2015 Follow up Comments I would like ...
r3 - 30 May 2016 - 13:21 by DmitryK
ZoneMinder
ZoneMinder Introduction ZoneMinder is video and CCTV surveillance and security application. It supports multiple video or IP cameras and a sophisticated motion d...
NEW - 30 May 2016 - 13:14 by DmitryK
FeatureRequest2013x12x04x172756
Feature Request: Description Raspberry Pi camera and infr camera support for the new cameras that connect via the CSI Camera port near the ethernet jack. Sorry...
r18 - 30 May 2016 - 13:01 by DmitryK
FeatureRequest2008x08x29x012221
Feature Request: Description hi! First sorry my terrible bad english. Could it be posible to encode movies directly as mp4 or mov "hinted" movies ? I'm trying ...
r2 - 30 May 2016 - 12:54 by DmitryK
MotionEye
motionEye Introduction motionEye is a modern and responsive web frontend for motion. The goal is to provide the user with an accessible web interface for most ...
r4 - 30 May 2016 - 12:39 by DmitryK
FeatureRequest2015x06x28x011059
Feature Request: Description some cameras have microfon so it would be nice to stream audio and video to internet. v4l2 audio suport would be nice too. So could...
r2 - 30 May 2016 - 12:37 by DmitryK
MotionMissionStatement
Motion Mission Statement It had to happen. Motion as a project also needs a mission statement. Motion is a program that tries to follow these basic principles. ...
r6 - 27 May 2016 - 08:16 by JosephHeenan
FI8904W
Main.AlbertHernaus 25 May 2016
NEW - 25 May 2016 - 10:30 by AlbertHernaus
SupportQuestion2016x05x22x143917
Question Hi, I'm trying to set Motion to use .local domains, but Motion doesn't resolve the address. It works only using the IP address. the mjpeg stream address ...
NEW - 22 May 2016 - 14:54 by DanielFarfan
SupportQuestion2016x05x21x103116
Question Hi motion community/developers, I need to know which one is the suggested version for ffmpeg that is supposed to work correctly with the current trunk ve...
NEW - 21 May 2016 - 10:38 by RiccardoB
FeatureRequest2016x05x18x152725
Feature Request: Description I'm sorry but I'm not good with the English, and I am writing through an interpreter. If thread /etc/motion/thread0.conf : netca...
r2 - 20 May 2016 - 07:56 by DimaDima
DLink
D Link DCS 900W wireless (802.11b) net camera Worked out of the box. The only config I had to do was to set the camera IP address and 802.11b settings. It came wi...
r15 - 19 May 2016 - 19:49 by StephensSeattle
BugReport2016x05x18x185949
BUG: I installed motion on banana pi and it works great. I use an IP camera via rtsp port and everything works good. I have installed mysql and created the table...
NEW - 18 May 2016 - 19:06 by VictorO
SupportQuestion2016x05x10x231619
Question I have an ELEC IP camera that I want to add to motion eye. I have a url for viewing the stream, and I can get it to work in VLC. rtsp://192.168.x.x:554/h...
NEW - 11 May 2016 - 01:59 by BryceLunt
SmtpEmailNotifyAction
Someone is in your main room Main.KamalGevariya 02 May 2016
NEW - 02 May 2016 - 10:14 by KamalGevariya
SupportQuestion2016x04x24x063011
Question I'm with debian os. I've made a ".motion" directory for motion.conf file and for saving captures but parameters from motion.conf file are not available a...
NEW - 24 Apr 2016 - 12:29 by VavinCavent
SupportQuestion2016x04x18x124606
Question I am trying to configure the Foscam FI9803P V2 camera and it is not working. Hi, My configuration file is: netcam_url http://URL:8094/cgi bin/CGIProxy.fc...
NEW - 18 Apr 2016 - 13:01 by ManuelBesoain
SupportQuestion2016x04x09x032704
Question Is it possible to instruct Motion to create animated GIFs from a series of images taken at motion detection, and then send each GIF once created to the u...
NEW - 09 Apr 2016 - 03:43 by ZamarAcido
SupportQuestion2016x04x06x200827
Question I'd like to be able to compute the speed of an object, but would need to know the exact time of capture for frames. Is there a way to obtain this from mo...
NEW - 06 Apr 2016 - 20:13 by GatorY
SupportQuestion2016x04x06x112400
Question Hi, sorry for starting a new thread, cant seem to add to my previous one. I am using motion Version 3.2.12 git20140228. I have the following settings: o...
NEW - 06 Apr 2016 - 11:33 by StuartBloom
SupportQuestion2016x03x12x165337
Question Hello In order to make my own video surveillance system i would want to use motion with a raspberry py and an external infrared sensor. I've already find...
NEW - 12 Mar 2016 - 17:05 by JeanEude
FeatureRequest2016x03x09x204727
Feature Request: Description I am having trouble with sunlight causing many false alarms. My thought was: Changing sunlight causes my black masked pixels to pro...
NEW - 09 Mar 2016 - 20:48 by ChristianSp
FeatureRequest2016x03x07x060126
Feature Request: Description 1st thank you to everybody who is involved in programming and maintaining this excellent software! It #39;s possible to mask the ou...
NEW - 07 Mar 2016 - 06:43 by DirkS
SupportQuestion2016x03x01x193118
Question I have been running 3.1.12 on Lubuntu 12.10 using tw68 v2 driver for 3 years. I have 6 analog cameras attached to an 8 channel pci card. It has been very...
NEW - 01 Mar 2016 - 20:23 by TonySimpson
SupportQuestion2016x02x24x175519
Question My motion videos pause every second instead of playing smoothly. On a previous install of motion (3.2.12), I did not have this issue. My motion video cap...
NEW - 24 Feb 2016 - 18:09 by JewbixCube
BugReport2016x02x17x163714
BUG: I can't install motion completely, some lib are available others not ... strange ! Note: I have made before an update , upgrade and reboot on my raspberry w...
NEW - 17 Feb 2016 - 16:45 by NicoBoileau
SupportQuestion2016x02x13x082142
Question Motion is unable to open the video device for a RTSP network stream. At one time it worked, but an update from v4l to v4l2 broke motion. I updated motion...
NEW - 13 Feb 2016 - 08:30 by AllanBogh
BugReport2016x02x12x002205
BUG: Hello. I am having trouble using the Motion wrong with Raspberry / Raspbian. When running motion, an error occurs in libavformat53 (not found). Is there any...
NEW - 12 Feb 2016 - 00:35 by RovilsonFMartins
SupportQuestion2016x02x10x031834
Question I installed motion (motion Version 3.2.12 git20140228) from the Raspian repository in a newly installed Raspian Jessie image (2016 02 03 raspbian jessie...
r3 - 11 Feb 2016 - 06:29 by JoelK
SupportQuestion2016x02x10x092310
Question Hello! I have a network camera with 1280x720 at a frame rate of 30 but when I activate the frame in motion on 30 runs the video what I in mpeg4 receiving...
NEW - 10 Feb 2016 - 09:28 by SteffenEwald
SupportQuestion2016x02x07x111529
Question I am using a logitech camera with autofocus. At night the autofocus gets completely confused and leaves the camera wildly out of focus. From command line...
r2 - 09 Feb 2016 - 17:14 by IaMalcolm
SupportQuestion2016x01x14x020240
Question I got the server running and everything seems well, but i've got some strange color problem with my webcam. At the beggining I had two problems: 1. I had...
r2 - 08 Feb 2016 - 10:27 by IaMalcolm
FeatureRequest2016x01x30x134106
Feature Request: Description Can record the sound too when a Webcam has a mic built in? Raymond Day Main.RaymondDay 30 Jan 2016 Follow up Comments
NEW - 30 Jan 2016 - 13:42 by RaymondDay
FeatureRequest2016x01x30x132424
Feature Request: Description Something to know it #39;s saving the video over lay on the video. All so is there a way to record sound if a Webcam has mics built...
NEW - 30 Jan 2016 - 13:40 by RaymondDay
FeatureRequest2009x06x23x045436
Feature Request: Description In addition to HTTP serving up files, these streams are generally available over RTSP for IP cameras. The folks over at LIVE555 Str...
r27 - 29 Jan 2016 - 19:53 by DmitryTsarev
SupportQuestion2016x01x29x091235
Question Linux GP7 500 3.16.0 4 686 pae #1 SMP Debian 3.16.7 ckt20 1 deb8u3 (2016 01 17) i686 GNU/Linux motion Version 3.2.12 git20140228 Fresh Debian 8 server wi...
NEW - 29 Jan 2016 - 17:53 by JonBaker
SupportQuestion2016x01x26x164001
Question This is my first time using Motion and I am having a interesting issue. Every time I start Motion either one or both of my cameras will register a motion...
NEW - 26 Jan 2016 - 16:44 by MarkMiller31
FeatureRequest2006x03x03x133815
Feature Request: Description It would be nice to have a way to add images (e.g. a logo) at some position. An extended feature of this kind would be a complete...
r3 - 25 Jan 2016 - 07:46 by FrancisDePaemeleere
SupportQuestion2016x01x22x144706
Question Hi, I'm a complete newbie, trying to install Motion, and it's failing. The output lines on the install messages are included below. It seems to be fail...
NEW - 22 Jan 2016 - 15:30 by MattDunn
BugReport2016x01x16x104627
BUG: It would be nice if Motion worked with an up to date V4L2. Please refactor code to utilize V4L2, or V4L1 as a fallback option. My first problem was a segmen...
r2 - 17 Jan 2016 - 10:48 by AllanBogh
MotionBrowser
Motion PHP Interface Introduction This is a PHP web application that allows you to browse through all events recorded by motion and watch / download the respecti...
r11 - 17 Jan 2016 - 03:26 by MalHedrick
SupportQuestion2016x01x11x185645
Question raspberry A / pi camera module debian wheezey 7.8 motion Version mmaltest, Copyright 2000 2005 Jeroen Vreeken/Folkert van Heusden/Kenneth Lavrsen from :...
NEW - 11 Jan 2016 - 18:57 by BilskerBoo
SupportQuestion2016x01x09x223738
Question I'm a complete Linux newbie. I can follow instructions, but cannot generate a single line in terminal, do not know how to tell what version of the OS I'm...
NEW - 10 Jan 2016 - 00:07 by CarlHart
SupportQuestion2016x01x05x175049
Question My project is Automatic License Plate Recognition (OpenALPR) to open a gate. I've a Raspberry Pi 2 with integrated cam. So far I managed to install Raspi...
NEW - 06 Jan 2016 - 19:51 by RaymondWarichet
MotionProxy
(Replace this text by a short headline for your project) Introduction What it does: Reduces CPU and network utilization by serving images to Motion that are pre ...
NEW - 27 Dec 2015 - 07:29 by MdFigley
SupportQuestion2015x12x19x202714
Question Hello, I am new to motion and have a question, which I just cannot figure out: When using motion on a boat at a mooring, which slowly turns with the chan...
r2 - 27 Dec 2015 - 06:35 by MdFigley
SupportQuestion2015x12x24x132041
Question When viewing the video is fast moving. If you use codecs mpeg4 or mp4 video file is created from a single frame. What adjusts the speed of the video? dae...
NEW - 24 Dec 2015 - 13:43 by AlexanderYakovlev
BugReport2015x12x20x160725
BUG: Hi, I'm running motion via a netcam snapshot on a ubiquity, sometimes I got a corrupted frame from the cam and a motion is detected. There is a way to disca...
NEW - 20 Dec 2015 - 16:18 by MaurizioA
SupportQuestion2015x12x09x034630
Question Hi, I'been working on a project to configure my Raspberry Pi, Motion and Telegram. The idea is to send a message to Telegram on my Android when an event ...
r3 - 17 Dec 2015 - 11:27 by JuanPita
FeatureRequest2015x12x14x021234
Feature Request: Description Can you somehow code it so the camera is in a sleep mode then when motion is detected it comes alive? I use IR cameras and they can...
NEW - 14 Dec 2015 - 02:15 by AlanLarson
FeatureRequest2015x12x11x075947
Feature Request: Description TinyCam Monitor (Android app) has this feature that lets the admin know how many are logged in and viewing the webcam feed. It woul...
NEW - 11 Dec 2015 - 08:14 by ReCp
SupportQuestion2015x11x30x142402
Question HI i have created a mask file, however, it doesn't seem to work in that motion is detected in the black areas. My mask is attached, could someone have a...
r2 - 11 Dec 2015 - 03:06 by SethD
SupportQuestion2015x12x07x212420
Question I've had Motion running for several years, connected to 9 IP cameras. It's all running on a Pogo Plug and has been working fine, until a while back we ha...
NEW - 07 Dec 2015 - 22:22 by DavidPowell
SupportQuestion2015x12x06x180232
Question How do I enable the Raw mode output from the API? The wiki page for the api mentions the raw mode, but does not say how to enable it. I found "?output...
NEW - 06 Dec 2015 - 18:29 by SethD
SupportQuestion2015x12x04x204304
Question I've installed Motion on Ubuntu 14.04 and configured it with my USBcamera (dev/video0). It all works great when I start Motion from the command line (sud...
NEW - 04 Dec 2015 - 20:50 by WayneGregori
SupportQuestion2015x09x17x080918
Question Hello, i have Rpi2 with 4 CPU cores bud motion using just one. Its possible to fixit? Thanks a lot. Environment Motion version: 3.2.12 ffmpeg...
r3 - 04 Dec 2015 - 11:09 by BoudelJenks
SupportQuestion2015x11x18x141357
Question Hi, sorry if this is a silly question. Is it possible to get motion to only store difference files whist motion is being detected? in other words, motio...
r5 - 30 Nov 2015 - 14:21 by StuartBloom
SupportQuestion2015x11x21x063236
Question I have a motion setup with IP cameras and I am having some issues. I have very bad video quality due to network loss. I have tested the camera quality wi...
SupportQuestion2015x10x05x231910
Question Is it possible to use a different video codec/encoder such as libx264 and output as .mp4? Paste in your error messages, config settings, terminal window ...
SupportQuestion2015x10x09x194939
Question Hi! Thank you for your application. I'm trying to connect ip camera via rtsp. netcam_url rtsp://192.168.25.100:554/live netcam_userpass admin:hKJE2MhiK9p...
BugReport2013x07x09x180501
BUG: I last build motion Sat Aug 18 22:11:02 2012 and it's been working fine ever since. Now a change in the version of ffmpeg libraries required a rebuilt afte...
SupportQuestion2015x10x12x201219
Question I am running an external command on the on_movie_end event. This external command may take some time to run, and I don't want motion to be paused waiting...
SupportQuestion2015x10x14x024210
Question I have a LaView LV CDP6014 network camera and I cannot find a way to add it to Motion. Specifically I am using MotionEye but I don't think that is releva...
FeatureRequest2015x10x25x140343
Feature Request: Description Open Network Video Interface Format is supported by an increasing number of IP surveillance cameras. That makes ONVIF an obvious st...
BugReport2015x11x05x002634
BUG: I have installed Motion on a new Raspberry Pi 2 with the latest "Jessie". I have never had any issues but now things are not working as they should be. With...
SupportQuestion2015x11x05x020025
Question Is there any way to make an installer for Mac OS? Forgive me but I'm not big into Linux/Unix or keen on how to compile source code properly. I see ther...
SupportQuestion2015x11x09x125704
Question what is method that use in this aplication to detecting the motion Environment Motion version: 3.2.12 ffmpeg version: Libraries: ffm...
SupportQuestion2015x11x01x100440
Question I have a IPC model LS IPK 15 camera from China that I can configure with NVSIP applicaiton (available for Android or iPhone). I can also acess to the s...
Logitech
Logitech 3000 and 4000 Both work very well. Driver: pwc/pwcx. Main.KennethLavrsen 15 Sep 2004 The new pwc only driver works well with my 4000 at 640x480. A gr...
r14 - 15 Nov 2015 - 05:09 by RaspI
MotionViewAndControll
An android App and Widget to view and control your Motion server from your phone Introduction Modified version of Simple Mjpeg streaming viewer for android ( htt...
r2 - 10 Nov 2015 - 14:47 by RatMole
PatchworkForNewRelease
A set of patches for "3.4" release Attached are a set of files for the creation of a new release. Installation of Patch Two variants of the same patches are subm...
BugReport2015x10x24x203225
BUG: If the capture device returns single jpeg pictures with size more 1mb then image will be truncated. The cause of this behaviour is the value of inline const...
NEW - 24 Oct 2015 - 20:38 by KonstantinSokolov
BugReport2015x10x23x194416
BUG: Crash With Logrotate I was having issues with the rpmfusion version of motion with Fedora 20 crashing late at night. I figured out that it was crashing when ...
NEW - 23 Oct 2015 - 20:01 by HarlanDaneker
SupportQuestion2015x10x16x151208
Question Hi All, I'm running Motion on a Raspberry Pi2. Everything seems to work OK as long as the target directory is set to the default /var/lib/motion. but whe...
NEW - 16 Oct 2015 - 16:00 by PuckeyP
SupportQuestion2015x10x12x121452
Question Hello everyone, I'm using Intel Edison mini breakout board which runs Yocto Linux operating system. I need help in 2 issues: 1) I'm trying to install Mot...
NEW - 12 Oct 2015 - 12:32 by FalakDesai
ACTi
To get ACTi cameras working you need the latest firmware for the camera. Use the value in motion.conf: netcam_url http://192.168.1.100/cgi bin/cmd/system?GET_STRE...
r5 - 06 Oct 2015 - 10:06 by DmitryTsarev
SupportQuestion2015x10x02x185939
Question Hi all, I'm trying to configure my Raspberry Pi as a DVR using the Pi Cam Module and several network IP cams (just one IP cam for now). I have Raspbian ...
r2 - 04 Oct 2015 - 17:23 by DouglasHurd
BugReport2015x09x30x203633
BUG: It seems that during init, pthread_getspecific( tls_key_threadnr ); is being called before the call to pthread_key_create(). On glibc I think getspecific i...
NEW - 30 Sep 2015 - 20:42 by DaveFlogeras
SupportQuestion2015x09x24x193945
Question Hi, first, thanks so much for providing this really useful piece of software! Here my question: Because of using an ethernet expander to bride about 20 ...
NEW - 24 Sep 2015 - 20:04 by DieterB
SupportQuestion2015x09x15x095956
Question Hi! I am referencing a motion stream on http://localhost:8081 but got a security error (the stream is displayed in a WebGL context). Do you know if there...
NEW - 15 Sep 2015 - 11:53 by FranceTittu
FeatureRequest2007x02x16x195401
Feature Request: Description I am looking for a way to automatically create a Edit Decision List (EDL) from video captured by multiple cameras. To do this I ne...
r7 - 11 Sep 2015 - 05:26 by GregBrandeau
SupportQuestion2015x09x04x201900
Question My motion server is a tiny Raspberry Pi with a USB camera. I don't know what frame rate it can maintain when recording, but I see the resulting .flv file...
NEW - 04 Sep 2015 - 21:02 by MarkusK
SupportQuestion2015x07x30x150540
Question I am tracking streams from two cameras and the resolution is relatively big, providing good quality videos but putting the CPU under heavy load. The came...
r2 - 04 Sep 2015 - 20:59 by MarkusK
SupportQuestion2015x06x25x083511
Question I am using motion with raspberry pi camera module, i want the output of motion to be only jpeg image and donot require video file to be saved . Currently...
r4 - 04 Sep 2015 - 20:51 by MarkusK
FeatureRequest2015x08x23x001605
Feature Request: Description alg_labeling give diffs feedback even when not over the threshold This is especially useful when picking a threshold to see how clo...
NEW - 23 Aug 2015 - 00:18 by DavidFries
SupportQuestion2015x08x21x032200
Question Is there a way to have motion run a script on detection instead of recording video? I've got an all in one with a webcam as a photo frame and I'd like t...
NEW - 21 Aug 2015 - 03:29 by DvrHax
SupportQuestion2015x08x20x095211
Question can you help me , when i use other resolution other than 352x288, always appear error log " main: Thread 1 Watchdog timeout, trying to do a graceful re...
NEW - 20 Aug 2015 - 10:00 by JonathanRahardjo
BugReport2013x10x29x172526
BUG: It's not really a bug, but I'm not sure where else to put it. Chrome now required MJPEG streams to be on html pages inside img tags. Can you please make thi...
r4 - 19 Aug 2015 - 17:16 by MiKn
MjpgStreamer
Convert v4l2 to mjpeg stream Introduction mjpg_streamer takes input from a v4l2 device and streams it in a format compatible with motion Detailed Description Ru...
r2 - 16 Aug 2015 - 17:55 by AibakiT
LoggingAgainstMotionStreamAuthPatch
Enable IP and Auth login attempts against Live Stream Description of Patch With the MotionStreamAuthPatch added to snapshot, we can expose the Live Stream Server...
r3 - 16 Aug 2015 - 15:37 by StevePowers
BugReport2015x07x30x234443
BUG: I have installed motion on several linux distros to see if this was distro dependant but it is not. Motion's all working well apart from the event_on_start...
NEW - 30 Jul 2015 - 23:51 by StephenCook
SupportQuestion2015x07x27x184223
Question I am trying to connect a Foscam FI9803P V2 to motion. The cam only supports RTSP with authentication. I tried 2 different settings in motion.conf which b...
NEW - 27 Jul 2015 - 18:56 by DanielLettau
A4Tech
A4Tech PK 900H (vimicro z star 0ac8:3500) 5960717.163368 usb 1 1: new high speed USB device number 9 using ehci pci 5960717.437133 usb 1 1: New USB device foun...
NEW - 23 Jul 2015 - 09:37 by TosiaraT
SupportQuestion2015x07x20x213901
Question Thank you for this free software and the support! I have installed motion 3.2.12 on my Raspberry Pi 2 on Ubuntu Mate 1.8.2 and I am using a USB webcam wi...
NEW - 20 Jul 2015 - 21:57 by RuGla
SupportQuestion2015x07x19x165037
Question Hi, I have a Philips SPC220NC USB webcam. The kernel driver is pac207. I can grab pictures from the camera e.g. with vgrabbj, but motion returns a "Error...
NEW - 19 Jul 2015 - 17:08 by KlingC
SupportQuestion2015x07x15x112754
Question I have a problem connecting motion to a rtsp camera stream, if i try a connection throug vlc it connect at once but when i try the same rtsp string in mo...
NEW - 15 Jul 2015 - 12:17 by KarstenDarre
SupportQuestion2015x07x13x031637
Question I've been using motion for a while now to display a web cam. I don't really utilize the motion detection but I do want to produce a daily time lapse vid...
NEW - 13 Jul 2015 - 03:40 by PaulMcCarthy
SupportQuestion2015x07x10x110304
Question Everything works fine until I updated to ubuntu 14.04. I am having problems with movie creation when I select mov as codec in ffmpeg_video_codec option. ...
r2 - 10 Jul 2015 - 13:05 by CarloOrecchia
SupportQuestion2015x06x28x233702
Question Hi I'm trying to get my motion run a script once the video file has been created. I installed motion according to this: http://elinux.org/RPi Cam Web Int...
NEW - 28 Jun 2015 - 23:48 by FlyingPersian
SupportQuestion2015x06x21x075421
Question Hi I have 3 IP cameras. 1 and 2 work flawlessly with motion as thread1 and thread2 and run at 720p. I'm using an up to date RPi2. The third camera is giv...
NEW - 21 Jun 2015 - 08:16 by DonAitken
UserFeedback
User Feedback You want to give feedback about Motion? This is the place. If you have support questions then please use the SupportRequests page to ask your su...
r81 - 16 Jun 2015 - 08:59 by VisitorWiki42
SupportQuestion2015x05x06x013406
Question I've compiled motion against my ffmpeg and it segfaults on detecting motion. I'm not quite sure it's motion's fault, but mpv plays videos fine. (gdb) run...
r2 - 15 Jun 2015 - 19:51 by MarcinJurkowski
SupportQuestion2015x06x15x095905
Question Is there any way to record from 4 cameras on any motion (on any of them) to one mpeg file that would have split screen to 4? Environment Motion versi...
NEW - 15 Jun 2015 - 10:25 by FlashT
LogitechSphereControl
Controlling a Logitech Sphere pan/tilt with Motion. To be able to control the Logitech Sphere you need one of the latest versions of the pwc driver. And you also ...
r21 - 12 Jun 2015 - 11:45 by SgtBlack
SupportQuestion2015x06x11x154355
Question I am having major problems getting my camera to connect. I have tried every option under the sun inside of motion.conf and I can't find the right netcam...
NEW - 11 Jun 2015 - 15:59 by XybotSmith
SupportQuestion2015x06x08x172246
Question My logitech C270 webcam will only work with the default width=320, height=240. When I change to 640x480, I get a segmentation fault. I have tried multipl...
NEW - 08 Jun 2015 - 17:43 by LinuxLearner
FeatureRequest2015x05x29x221057
Feature Request: Description You guys are doing a brilliant job with the motion software. First of all, I would like to thank you for that. I am using the http ...
NEW - 29 May 2015 - 22:14 by EnthusiasticMotionUser
SupportQuestion2015x05x17x163746
Question I have been using motion for a few days. It works fine, except when I attempt to add a command to the on_event_end parameter in the motion.conf script, ...
NEW - 17 May 2015 - 17:08 by GilbertWilliams
SupportQuestion2015x05x15x192612
Question i want to add "motion" in my c program. In detail is there any way to catch the event if motion is found by camera. Or any lib to integrate this with pro...
r2 - 15 May 2015 - 19:52 by SetuGupta
Axis
Axis 2100, 210 series net cameras (and quite possibly most Axis models) .. work very well with motion. Use this link in your motion.conf: * Axis 210: netcam_ur...
r6 - 15 May 2015 - 14:06 by AndersLarsson
SupportQuestion2015x05x07x014058
Question Calls to ffmpeg 2.2.14 are segfaulting again. 2.2.12 worked fine. If there any way to configure app to use ffmpeg externally (ie. piping the data into it...
NEW - 07 May 2015 - 01:51 by ChrisConner
SupportQuestion2015x05x05x175317
Question The system packages Debian 8 jessie no package ffmpeg only libav. Motion output has many jpg files. What should be done to rectify the situation? Paste i...
NEW - 05 May 2015 - 18:05 by IgorLimonov
SupportQuestion2015x05x02x074200
Question Hi all, i was trying out motion on my pi with a Logitech QuickCam. When i try to connect to the ip i just see a grey screen with 'unable to open video d...
NEW - 02 May 2015 - 07:45 by BartChaltin
SupportQuestion2015x04x28x143147
Question Is it possible to use an external script to show text on the screen? I would like to pull data from an external script and have it display in the event_...
NEW - 28 Apr 2015 - 14:48 by KeithSchmitt
SupportQuestion2015x04x22x174829
Question How to solve green only image? Camera is a Wanscam a foscam clone I believe. First camera thread working fine. Second green image. 2 End of camera conn...
NEW - 22 Apr 2015 - 18:51 by JamesRoots
SupportQuestion2015x04x22x121417
Question Motion was running fine for quite a long time built against ffmpeg 1.2.6 and with these patches: https://github.com/mapmot/moverlay/tree/master/media vid...
NEW - 22 Apr 2015 - 12:27 by StefanBruda
SupportQuestion2015x04x20x154721
Question Hi to all ! I have read this post http://www.lavrsen.dk/foswiki/bin/view/Motion/FeatureRequest2009x06x23x045436 and I have tried to download the motion G...
r3 - 22 Apr 2015 - 09:56 by EmilioDefranco
SupportQuestion2013x11x05x183558
Question After installing motion trunk I noticed that images were no longer being saved as before. That is, previously if I set post_capure to 25 and the gap to s...
r4 - 22 Apr 2015 - 08:50 by DavidRobb
SupportQuestion2015x04x13x222017
Question hello, i am getting an error while starting motion on a rpi. /etc/init.d/motion: 2: /etc/default/motion: logfile: not found motion file start_motion_daem...
r4 - 21 Apr 2015 - 21:02 by ArnaudCognard
SupportQuestion2014x05x06x220454
Question Hello, I installed the Motion package on my RPi (v2, with Debian) with a RPi camera using the instructions given at http://www.codeproject.com/Articles/6...
r4 - 12 Apr 2015 - 09:42 by TosiaraT
SupportQuestion2011x10x06x163706
Question My Motion runs for a while, generally around an hour then stops. The cameras are analog connected to an easycap device. I've just upgraded to 3.2.12 Any ...
r3 - 12 Apr 2015 - 09:23 by TosiaraT
SupportQuestion2014x10x12x155245
Question Hello, I try to install Motion on Slackware, and i have a lot of mistakes. Can you help me to instal Motion? Paste in your error messages, config setting...
r2 - 12 Apr 2015 - 09:21 by TosiaraT
SupportQuestion2014x12x02x171122
Question Afternoon there. I am using the latest version of mr dave's motion from git, running on Ubuntu 14.10, which initally runs pretty much successfully. Aft...
r2 - 12 Apr 2015 - 09:14 by TosiaraT
SupportQuestion2014x12x13x040558
Question Hi there, thanks for your work. Motion worked fine with F20. After the update to F21, with the same config file, when run it gives the error message belo...
r2 - 12 Apr 2015 - 09:09 by TosiaraT
SupportQuestion2015x01x09x181454
Question Hi there, it would be nice to have a stable release at some point, motion is great piece of software without equivalent on linux; and it is actively main...
r2 - 12 Apr 2015 - 09:07 by TosiaraT
SupportQuestion2015x01x23x222142
Question I try to use the following procedure in order to installa Motion on Centos: "RPM for Fedora on x86/x86 64 Available on RPM Fusion, build without DB sup...
r2 - 12 Apr 2015 - 09:00 by TosiaraT
SupportQuestion2015x01x29x172936
Question Hi, i've a smartphone android with ip webcam app installed and a debian pc with motion and ffmpeg installed. the smartphone in a url http://myip:8080/pho...
r3 - 12 Apr 2015 - 08:54 by TosiaraT
SupportQuestion2015x01x20x164957
Question Every image collected is spoiled by a number of blocky image artifacts that appear to be where regions of the image have been swapped or currupted. I am ...
r3 - 12 Apr 2015 - 08:51 by TosiaraT
SupportQuestion2015x02x26x122951
Question Hi all , excuse me but I am total noob in unix system so I follow a tutorial for installing motion . this one http://www.instructables.com/id/Raspberry P...
r4 - 12 Apr 2015 - 08:47 by TosiaraT
SupportQuestion2015x03x03x090955
Question Hello ! * I've configured "on_picture_save" to send me email with picture attached when motion detects movement = it works great ! :) * I've confi...
r3 - 12 Apr 2015 - 08:43 by TosiaraT
SupportQuestion2015x03x11x105920
Question Hello Motion support With a little tributaries, has managed to set up the Motion on the new Raspberry Pi 2, which have more resources to deal with than t...
r3 - 12 Apr 2015 - 08:37 by TosiaraT
SupportQuestion2015x03x23x002537
Question I am totally new to RasPi . I have to do this with my NOIR camera module on the B board: Enable the motion detect by sending a signal to an input p...
r2 - 12 Apr 2015 - 08:31 by TosiaraT
SupportQuestion2014x11x15x115926
Question I installed motion on asuswrt router through optware but when I start with "motion n" I get this error 1 ioctl (VIDIOCGCAP): Invalid argument Paste in...
r2 - 12 Apr 2015 - 08:27 by TosiaraT
SupportQuestion2011x01x09x193606
Question Hi, I am running into trouble with this camera in mjpeg mode: v4l2_palette 2 although YUYV works fine but the framerate is too low for the later (10 fps ...
r2 - 12 Apr 2015 - 08:20 by TosiaraT
BugReport2015x03x17x181334
BUG: After a while, some threads die. Actually, I still can access the web server of the cameras and see their picture, just motion lost the connection. Re start...
NEW - 17 Mar 2015 - 18:23 by HolgerJakobs
LinksToMotionWebcams
Links to Working Webcams driven by Motion You are very welcome to add a link and short description of your webcam below. Kenneth Lavrsen's Webcam Kenneth Lavrsen...
r71 - 15 Mar 2015 - 11:07 by JuanPabloDiaz
SupportQuestion2014x10x21x102158
Question I have the current trunk which supports RTSP, but I haven't been able to interface with my RSTP IP Cam. In motion.conf I'm using netcam_url rtsp://192.1...
r3 - 14 Mar 2015 - 06:39 by TosiaraT
FeatureRequest2014x04x10x134646
Feature Request: Description Raspberry Pi is gpu powerful devices but the cpu is equievalent to pentium 2 CPU is the bottleneck So motion software need improvem...
r5 - 13 Mar 2015 - 08:25 by JuergenHausladen
FeatureRequest2015x03x03x212850
Feature Request: Description I hope i didn #39;t overlooked some related suggestion. It would be great, for performance issues, to set a resolution for the moti...
NEW - 03 Mar 2015 - 22:16 by HansMLler
FeatureRequest2015x03x02x153909
Feature Request: Description Hi, nice piece of code, and stable to say first. My idea if one could use in on_picture_save something like ./mycode #37;x...
NEW - 02 Mar 2015 - 16:03 by JohnSmithCZ
MotionHttpAPI
API for HTTP Interface for Motion Output Modes The HTTP Interface have two output modes : * HTML : To use it from a web browser. * RAW : To easily be parse...
r34 - 28 Feb 2015 - 18:01 by AlAl
UmaskGroupPermission
Respect umask and allow group write permission on directories Description of Patch motion was not respecting umask (umask 0002) and allowing group write permissi...
NEW - 25 Feb 2015 - 17:52 by KennethBurgener
SupportQuestion2015x02x03x013740
Question I have been running Motion with a TrendNet IP100 and 2 Foscam 8910W cameras. Everything has been great, my only issue is that I end up with 10 20 images...
r2 - 17 Feb 2015 - 00:49 by AlanFord
SupportQuestion2015x02x09x042621
Question I would like see if my understanding about the sysconfdir configure script parameter is correct. According to http://www.lavrsen.dk/foswiki/bin/view/Mot...
NEW - 09 Feb 2015 - 05:57 by AlanFord
TCPFastOpen
Enable "TCP Fast Open" especially for listening HTTP sockets Description of Patch TCP Fast Open can greatly reduce the latency of TCP connection setup. This espe...
NEW - 27 Jan 2015 - 12:52 by FolkertvanHeusden
GenCam
GenCam Introduction Happy browsing of cam events, your personal utube Detailed Description Attached Files http://22.fi/~jyvae/gencam.tar.gz Installation requi...
r8 - 23 Jan 2015 - 17:38 by JavierMarcon
WebHttpManyThreads
webhttpd for more than 9 threads Introduction The distributed version of motion 3.2.4 fails to set camera status if the camera thread number is more than 9. This...
r6 - 10 Jan 2015 - 21:25 by DavidPowell
FeatureRequest2015x01x07x051255
Feature Request: Description Maybe im going about this all wrong but i have tied all sorts of things. What im trying to do is be able to delete the files create...
NEW - 07 Jan 2015 - 05:13 by DavidJeffery
AvoidNullDereferenceRTSPConnect
Avoid null dereference in rtsp_connect() Description of Patch Avoid a segfault when netcam_url to a rtsp netcam is wrong. Installation of Patch Download the pat...
NEW - 16 Dec 2014 - 11:15 by ChristopheGRENIER
FixMemLeakNetcamRtsp
Fix memor leak when using rtsp camera Description of Patch Fix various memory leak reported by valgrind. Installation of Patch Download the patch file. If it is...
NEW - 16 Dec 2014 - 10:42 by ChristopheGRENIER
FeatureRequest2014x12x13x223108
Feature Request: Description I have a son with epilepsy and I would like to use Motion to detect potential seizures. I have tested that with a raspberry pi came...
NEW - 13 Dec 2014 - 22:31 by MikeC
BugReport2014x12x10x212122
BUG: As mentioned above, motion uses every few seconds more Memory, until it gets killed because of a "out of memory" message in syslog. I can see the memory usa...
NEW - 10 Dec 2014 - 21:34 by ChristopherStein
BugReport2014x12x10x101759
BUG: There is a memory leak in the error path of read_rtsp_image(). It has triggered an Out of Memory. Patch included. diff rup motion/netcam_rtsp.c motion.cgr/...
NEW - 10 Dec 2014 - 10:31 by ChristopheGRENIER
BugReport2014x12x04x135313
BUG: Camera sending 1920 x 1080 fails with: netcam image height (1080) is not modulo 16 A) I tried changing netcam.c where the check occurs to be '% 8' instead o...
r4 - 05 Dec 2014 - 23:36 by GeneC
MotionDetector
dockmotion Introduction A surveillance solution base on Motion and Docker. Detailed Description It's easy and ready to use. Just plug in a webcam and run dockmo...
r2 - 03 Dec 2014 - 13:30 by KeFeiLin
NetcamModulo16Patch
Netcam Modulo 16 Patch Uploaded by Main.KennethLavrsen on behalf of Main.PeterHolik who posted it on the mailing list. Introduction Motion cannot handle image di...
r11 - 23 Nov 2014 - 02:11 by AngelVera
SupportQuestion2014x02x26x164339
Question I was running motion with 2 analog cameras connected to a standard 4 video in audio to usb adapter. (Bus 002 Device 002: ID 05e1:0408 Syntek Semiconduc...
r3 - 11 Nov 2014 - 01:58 by JulioReson
BugReport2014x09x02x113959
BUG: I use motion for my surveillance system and sometimes I get segfault when motion convert YUV420 to JPEG for streaming. I notice that this happens in some ci...
r3 - 10 Nov 2014 - 15:41 by GiovanniLicata
FeatureRequest2012x07x03x113916
Feature Request: Description At night or at a specific time span, lets say from 19:00 to 06:00, motion should automatic change its values threshold and noise_le...
r3 - 27 Oct 2014 - 13:16 by DirkBeer
BugReport2014x08x03x235204
BUG: I am not able to get motion to stream my network cameras. They are all wireless and I have already pre configured each one. I have the Foscam FI8910W and I ...
r2 - 26 Oct 2014 - 22:46 by MikeHoward
SupportQuestion2014x10x17x125508
Question Hello, I set up motion to capture a video if there is a motion within image of my door cam that works great. The main part of the image consists of the...
NEW - 17 Oct 2014 - 13:09 by RoBra81
Number of topics: 200
< Previous Page 2 of 11 Next >

See also: rss-small RSS feed, recent changes with 50, 100, 200, 500, 1000 topics, all changes
Topic revision: r2 - 27 Oct 2010, KennethLavrsen
Copyright © 1999-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Please do not email Kenneth for support questions (read why). Use the Support Requests page or join the Mailing List.
This website only use harmless session cookies. See Cookie Policy for details. By using this website you accept the use of these cookies.