Detailed topic list for Motion Web

Results from Motion web retrieved at 10:18 (GMT)

BugReport2012x07x04x221206

BUG: Gento emerge motoin fail, video2.c undeclared function emerge motion fails compilation stage for video2.c Resolved, video2.c ï»¿ï»¿ï»¿i had to comment out ...

r2 - 07 Jul 2012 - 18:31 by AngelCarpintero

BugReport2012x07x11x123325

BUG: Describe the bug in plain text here. Paste in error messages and other text where new lines must be preserved in the field below Paste in your error message...

r3 - 18 Jul 2012 - 09:00 by DannyDeKeuleneire

BugReport2012x07x13x140912

BUG: Whatever value you set for aera_detect, it will be ignored! No error message , because area_detect is not working at all! The responsible option area_detec...

r2 - 19 Aug 2012 - 19:57 by BeBlochl

BugReport2012x07x20x062402

BUG: Compilation fails at the make stage, complaining that the storage sizes of vid_pic and vid_win are not known. This happens even following a clean download o...

r2 - 12 Mar 2013 - 16:12 by RkaneKnight

BugReport2012x07x27x023750

BUG: After the latest ports upgrade on FreeBSD motion stopped working The error goes like: 2 Retrying until successful connection with camera 2 vid_start: Y...

NEW - 27 Jul 2012 - 02:43 by TisugolTisugol

BugReport2012x09x08x203013

BUG: Well, just try to run motion, but failed. Tested: 1) 3.2.12 source 2) daily snapshot motion 20120605 224837 3) SVN version HELP : ) 3.2.12 source: ./configu...

NEW - 08 Sep 2012 - 21:04 by AndAnd

BugReport2012x09x19x151452

BUG: Hello, I'm using Motion with a DCS 932L wireless netcam. The WiFi connection to this camera is medium to poor, so the transmission is not always perfect. I'...

r3 - 17 Feb 2014 - 06:36 by KeithWillis

BugReport2012x10x16x201444

BUG: Sinply put, when I launch the motion program, my connection to the internet gets killed. The motion program itself runs fine. But I have to re connect to t...

NEW - 16 Oct 2012 - 21:07 by EdwinKribbs

BugReport2012x10x20x162744

BUG: Though the addition of the cnt process_thisframe variable and associated "if(cnt process_thisframe)" tests greatly reduces processor utilization with mini...

NEW - 20 Oct 2012 - 17:17 by BernieK

BugReport2012x10x28x210133

BUG: I downloaded the latest source from git using "git clone http://github.com/sackmotion/motion.git into directory /home/root/motion. The I entered the motion...

NEW - 28 Oct 2012 - 21:04 by SteveGee

BugReport2012x11x03x084529

BUG: Motion detects an event, it saves the jpegs according to the filenamesetting, but when I view the pictures, the time isn't as the filename says. This isn't ...

NEW - 03 Nov 2012 - 09:08 by YoupMol

BugReport2012x11x05x063121

BUG: I build motion from the github, and I don't have ffmpeg. Don't need it... But then I started motion, and there was a warning: 0 ALR ALL conf_cmdparse:...

NEW - 05 Nov 2012 - 06:55 by YoupMol

BugReport2012x11x21x225754

BUG: I'm getting a segmentation fault on startup when trying to grab frames from an iViewHD SD camera. root@linuxtv:/home/admin/motion# ./motion n d 9 0 NTC...

NEW - 21 Nov 2012 - 23:05 by RzTen1

BugReport2012x12x12x163049

BUG: i set up motion on a raspberrypi with 2 webcams. the problem is there are lines form the pictures of one camera on the picture of the other cam, like interf...

NEW - 12 Dec 2012 - 16:45 by EnricoS

BugReport2012x12x12x205638

BUG: Update: i just found the the bug and fixed. In motion.h there was that:#define DEF_SQL_QUERY "sql_query insert into security(camera, filename, frame, file_t...

r2 - 13 Dec 2012 - 12:41 by KarolisE

BugReport2012x12x27x050731

BUG: Any flv files play at a crazy framerate so a 2 min file is played in 2 second. I've tried with motion 3.2.12 on archlinux (ffmpeg 1.0) and ubuntu ffmpeg ve...

NEW - 27 Dec 2012 - 05:16 by OlegRakh

BugReport2013x01x17x193723

BUG: When I configure Motion to run as a daemon, it dies soon after starting. I am running a headless Ubuntu server which is being used to transfer images to a...

r3 - 29 Jan 2013 - 22:09 by DazzConway

BugReport2013x02x05x024206

BUG: ./configure with mysql lib=/usr/lib/i386 linux gnu/ is ok make fails giving errors as described under. IboS@pc:~/Téléchargements/motion/motion$ make Welcom...

NEW - 05 Feb 2013 - 02:47 by IboS

BugReport2013x02x15x193900

BUG: I'm trying to use motion with an old "The Imaging Source" Astrocam, because it works nicely with very low light. I could not find any compatible palette set...

NEW - 15 Feb 2013 - 19:57 by CavaC

BugReport2013x03x07x071831

BUG: Motion 3.2.12 is prone to multiple vulnerabilities. These vulnerabilities are Buffer Overflows, Cross Site Scripting and Cross Site Request Forgery. Buffer ...

r2 - 10 Oct 2014 - 19:19 by MrDave

BugReport2013x03x20x143659

BUG: Running motion installed via apt get causes following errors. 0 Processing thread 0 config file /home/deal/motion.conf 0 Motion 3.2.12 Started 0 ffm...

NEW - 20 Mar 2013 - 14:38 by PawelGrzes

BugReport2013x03x31x063416

BUG: I want to use on_event_start future of Motion. But it can't run X applications when run in daemon mode!!! I want to use my monitor to show the webcam stream...

NEW - 31 Mar 2013 - 06:51 by YusufGungor

BugReport2013x05x07x103525

BUG: This might be a duplicate, but there are lots of us using motion with mjpg streamer. I believe I represent the large contingent of users who are not progr...

NEW - 07 May 2013 - 11:03 by TomHinkle

BugReport2013x06x05x033036

BUG: Hi to all. It is seems autofocus webcams are bad to use with motion. I use webcam with autofocus and install it to spy stable object (my computer table). Re...

NEW - 05 Jun 2013 - 03:33 by MustaiMustai

BugReport2013x06x10x183823

BUG: Hello, Using certain webcams (Logitech C310, Logitech C110), I get this error if I run Motion after a reboot. However, the weird thing is this error doesn't...

NEW - 10 Jun 2013 - 18:45 by EricRead

BugReport2013x06x27x200451

BUG: I configured motion to rollover a timelapse file on a daily base. The resolution is 800x600. I tried to capture a survillance video of my cats while away. ;...

NEW - 27 Jun 2013 - 20:20 by KlausMueller

BugReport2013x07x09x180501

BUG: I last build motion Sat Aug 18 22:11:02 2012 and it's been working fine ever since. Now a change in the version of ffmpeg libraries required a rebuilt afte...

r5 - 22 Nov 2015 - 18:49 by MrDave

BugReport2013x07x21x175650

BUG: Everything works fine when I call "motion". However, no motion is recorded when I call "/etc/init.d/motion start" For debugging I started motion as service:...

NEW - 21 Jul 2013 - 17:59 by JohnMiller

BugReport2013x08x02x222612

BUG: Hello I config the motion for two webcans, but this didn't work good for me. Any suggestions? Thanks. 0 Processing thread 0 config file /etc/motion/moti...

NEW - 02 Aug 2013 - 22:32 by LuanCasagrande

BugReport2013x08x11x161945

BUG: The mpeg4 setting for ffmpeg_video_codec doesn't work correctly with the HTML5 video tag, the needed settings are different. It would make a lot more sens...

NEW - 11 Aug 2013 - 16:29 by PedroCorteReal

BugReport2013x09x28x182300

BUG: I am experimenting with settings to see the effect. I had minimum_motion_frame set as 2, and output was as expected, both movie and image files. Then I chan...

NEW - 28 Sep 2013 - 18:24 by WilliamPhelps

BugReport2013x10x08x131833

BUG: I use motion 3.2.12 on raspberry pi with one high resolution IP camera. To stop motion detection I use the trigger port to send "pause" command to motion. ...

NEW - 08 Oct 2013 - 13:45 by MaartenOll

BugReport2013x10x29x172526

BUG: It's not really a bug, but I'm not sure where else to put it. Chrome now required MJPEG streams to be on html pages inside img tags. Can you please make thi...

r4 - 19 Aug 2015 - 17:16 by MiKn

BugReport2014x01x28x084955

BUG: Sometimes the JPG does not download correctly and is broken, i.e. the bottom half is missing. Motion detects this as motion, whereas it should ignore the fr...

NEW - 28 Jan 2014 - 08:50 by OERNiiB

BugReport2014x02x11x144906

BUG: if the netcam url is of the shape http://host:port/path and a proxy is declared it doesn't work. I make a correction in netcam.c line 1831 1833 ptr = mymall...

NEW - 11 Feb 2014 - 15:02 by GillesVautier

BugReport2014x02x20x092016

BUG: error: ‘VIDEO_PALETTE_YUV420P’ undeclared Welcome to the setup procedure for Motion, the motion detection daemon! If you get error messages during this proce...

NEW - 20 Feb 2014 - 09:29 by DrootnarDrootnar

BugReport2014x04x09x193834

BUG: I have motion running with 2 webcams. Only one works, other does not provide video. Tried lowering resolution with no luck. Running xubuntu on ARM (odroid)....

NEW - 09 Apr 2014 - 19:43 by PanosXatzi

BugReport2014x04x26x081707

BUG: I've seen many people posting a similar problem. The basic problem I have is that motion fails after a change is detected from a netcam_url. I've read in th...

NEW - 26 Apr 2014 - 09:25 by MartinGogo

BugReport2014x04x30x234839

BUG: I ran valgrind on motion 3.2.12 using my config file (see below) and a foscam IR IP camera. There were several instances of memory leaks reported by valgrin...

NEW - 01 May 2014 - 00:32 by NicoleBruck

BugReport2014x05x01x001656

BUG: I install motion and try to record motion video, but file doesn't play in VLC, I saw only first picture. Option for record video file ffmpeg_output_movies...

NEW - 01 May 2014 - 00:20 by JackYellow44

BugReport2014x05x06x164737

BUG: I'm using a motion client (i.e. mpeg4 recorder) together with a motion webcam server (i.e. webcam picture provider) on two different PCs on the same network...

NEW - 06 May 2014 - 17:20 by SimonLemarchand

BugReport2014x07x15x033639

BUG: My webcam light remains on and the device becomes unusable when killing motion or the terminal that's running motion. I have to both unplug the device and ...

NEW - 15 Jul 2014 - 03:38 by DanielSohn

BugReport2014x08x03x235204

BUG: I am not able to get motion to stream my network cameras. They are all wireless and I have already pre configured each one. I have the Foscam FI8910W and I ...

r2 - 26 Oct 2014 - 22:46 by MikeHoward

BugReport2014x09x02x113959

BUG: I use motion for my surveillance system and sometimes I get segfault when motion convert YUV420 to JPEG for streaming. I notice that this happens in some ci...

r3 - 10 Nov 2014 - 15:41 by GiovanniLicata

BugReport2014x09x12x111528

BUG: Hi, i have problem, dont work stream in motion from ip camera sip1601w (http://10.144.40.200). In run motion debug write "netcam_output_message: Invalid SO...

NEW - 12 Sep 2014 - 12:09 by AndrianAndrian

BugReport2014x09x21x172800

BUG: I was testing motion and then it said * Error in `motion': free(): invalid size: 0x00007f960000dc60 * Please help Thanks tony@Marvis 4:~$ sudo motion 0 P...

r2 - 10 Oct 2014 - 19:00 by MrDave

BugReport2014x12x04x135313

BUG: Camera sending 1920 x 1080 fails with: netcam image height (1080) is not modulo 16 A) I tried changing netcam.c where the check occurs to be '% 8' instead o...

r4 - 05 Dec 2014 - 23:36 by GeneC

BugReport2014x12x10x101759

BUG: There is a memory leak in the error path of read_rtsp_image(). It has triggered an Out of Memory. Patch included. diff rup motion/netcam_rtsp.c motion.cgr/...

NEW - 10 Dec 2014 - 10:31 by ChristopheGRENIER

BugReport2014x12x10x212122

BUG: As mentioned above, motion uses every few seconds more Memory, until it gets killed because of a "out of memory" message in syslog. I can see the memory usa...

NEW - 10 Dec 2014 - 21:34 by ChristopherStein

BugReport2015x03x17x181334

BUG: After a while, some threads die. Actually, I still can access the web server of the cameras and see their picture, just motion lost the connection. Re start...

NEW - 17 Mar 2015 - 18:23 by HolgerJakobs

Number of topics: 50

< Previous Page 7 of 41 Next >