No motion detected in netcam (Axis) though motion previously detected in webcam

Question

I am able to successfully run Motion with a Phillips webcam and detect motion, capturing a series of event-related JPEGs. However, when I set up Motion for my Axis camera according to the netcam instructions, it reads the stream and appears to be working fine (according to debug level 9 output), though there is never a motion detection event, even when a hand is waved right in front of the camera. There are no errors (that I can tell), and the changing files sizes when I induce a motion event clearly shows that there are significant changes in the image content.

I have experimented with adjusting various parameters (had been using despeckle, now have it off; commented out every line associated with webcam server; adding the netcam url into the thread file, taking it out again; reducing pixels changed from 1500 to 500; etc).

MJPEG output from the Axis is 2 fps, resolution is 4CIF.

[Update: I was able to change the aspect ratio to 640x480 and rerun. Same results]

I monitored it while creating this debug log to ensure motion was clearly occurring.

Could find no syslogs in /var/

Motion.conf file

<verbatim>
# Rename this distribution example file to motion.conf
#
# This config file was generated by motion 3.2.12


############################################################
# Daemon
############################################################

# Start in daemon (background) mode and release terminal (default: off)
daemon off

# File to store the process ID, also called pid file. (default: not defined)
process_id_file /var/run/motion/motion.pid 

############################################################
# Basic Setup Mode
############################################################

# Start in Setup-Mode, daemon disabled. (default: off)
setup_mode off

###########################################################
# Capture device options
############################################################

# Videodevice to be used for capturing  (default /dev/video0)
# for FreeBSD default is /dev/bktr0
# videodevice /dev/video0

# v4l2_palette allows to choose preferable palette to be use by motion
# to capture from those supported by your videodevice. (default: 8)
# E.g. if your videodevice supports both V4L2_PIX_FMT_SBGGR8 and
# V4L2_PIX_FMT_MJPEG then motion will by default use V4L2_PIX_FMT_MJPEG.
# Setting v4l2_palette to 1 forces motion to use V4L2_PIX_FMT_SBGGR8
# instead.
#
# Values :
# V4L2_PIX_FMT_SN9C10X : 0  'S910'
# V4L2_PIX_FMT_SBGGR8  : 1  'BA81'
# V4L2_PIX_FMT_MJPEG   : 2  'MJPEG'
# V4L2_PIX_FMT_JPEG    : 3  'JPEG'
# V4L2_PIX_FMT_RGB24   : 4  'RGB3'
# V4L2_PIX_FMT_UYVY    : 5  'UYVY'
# V4L2_PIX_FMT_YUYV    : 6  'YUYV'
# V4L2_PIX_FMT_YUV422P : 7  '422P'
# V4L2_PIX_FMT_YUV420  : 8  'YU12'
# v4l2_palette 8

# Tuner device to be used for capturing using tuner as source (default /dev/tuner0)
# This is ONLY used for FreeBSD. Leave it commented out for Linux
# tunerdevice /dev/tuner0

# The video input to be used (default: 8)
# Should normally be set to 0 or 1 for video/TV cards, and 8 for USB cameras
# input 8

# The video norm to use (only for video capture and TV tuner cards)
# Values: 0 (PAL), 1 (NTSC), 2 (SECAM), 3 (PAL NC no colour). Default: 0 (PAL)
# norm 0

# The frequency to set the tuner to (kHz) (only for TV tuner cards) (default: 0)
# frequency 0

# Rotate image this number of degrees. The rotation affects all saved images as
# well as mpeg movies. Valid values: 0 (default = no rotation), 90, 180 and 270.
rotate 0

# Image width (pixels). Valid range: Camera dependent, default: 352
width 640

# Image height (pixels). Valid range: Camera dependent, default: 288
height 480

# Maximum number of frames to be captured per second.
# Valid range: 2-100. Default: 100 (almost no limit).
# framerate 5

# Minimum time in seconds between capturing picture frames from the camera.
# Default: 0 = disabled - the capture rate is given by the camera framerate.
# This option is used when you want to capture images at a rate lower than 2 per second.
minimum_frame_time 0

# URL to use if you are using a network camera, size will be autodetected (incl http:// ftp:// or file:///)
# Must be a URL that returns single jpeg pictures or a raw mjpeg stream. Default: Not defined
netcam_url http://169.254.71.156/mjpg/video.mjpg

# Username and password for network camera (only if required). Default: not defined
# Syntax is user:password
netcam_userpass [(removed from this posting)]

# The setting for keep-alive of network socket, should improve performance on compatible net cameras.
# 1.0:         The historical implementation using HTTP/1.0, closing the socket after each http request.
# keep_alive:  Use HTTP/1.0 requests with keep alive header to reuse the same connection.
# 1.1:         Use HTTP/1.1 requests that support keep alive as default.
# Default: 1.0
netcam_http 1.1

# URL to use for a netcam proxy server, if required, e.g. "http://myproxy".
# If a port number other than 80 is needed, use "http://myproxy:1234".
# Default: not defined
# netcam_proxy value 

# Set less strict jpeg checks for network cameras with a poor/buggy firmware.
# Default: off
# netcam_tolerant_check off

# Let motion regulate the brightness of a video device (default: off).
# The auto_brightness feature uses the brightness option as its target value.
# If brightness is zero auto_brightness will adjust to average brightness value 128.
# Only recommended for cameras without auto brightness
auto_brightness off

# Set the initial brightness of a video device.
# If auto_brightness is enabled, this value defines the average brightness level
# which Motion will try and adjust to.
# Valid range 0-255, default 0 = disabled
brightness 0

# Set the contrast of a video device.
# Valid range 0-255, default 0 = disabled
contrast 0

# Set the saturation of a video device.
# Valid range 0-255, default 0 = disabled
saturation 0

# Set the hue of a video device (NTSC feature).
# Valid range 0-255, default 0 = disabled
hue 0


############################################################
# Round Robin (multiple inputs on same video device name)
############################################################

# Number of frames to capture in each roundrobin step (default: 1)
# roundrobin_frames 1

# Number of frames to skip before each roundrobin step (default: 1)
# roundrobin_skip 1

# Try to filter out noise generated by roundrobin (default: off)
# switchfilter off


############################################################
# Motion Detection Settings:
############################################################

# Threshold for number of changed pixels in an image that
# triggers motion detection (default: 1500)
threshold 500

# Automatically tune the threshold down if possible (default: off)
threshold_tune off

# Noise threshold for the motion detection (default: 32)
noise_level 32

# Automatically tune the noise threshold (default: on)
noise_tune on

# Despeckle motion image using (e)rode or (d)ilate or (l)abel (Default: not defined)
# Recommended value is EedDl. Any combination (and number of) of E, e, d, and D is valid.
# (l)abeling must only be used once and the 'l' must be the last letter.
# Comment out to disable
# despeckle EedDl

# Detect motion in predefined areas (1 - 9). Areas are numbered like that:  1 2 3
# A script (on_area_detected) is started immediately when motion is         4 5 6
# detected in one of the given areas, but only once during an event.        7 8 9
# One or more areas can be specified with this option. (Default: not defined)
; area_detect value

# PGM file to use as a sensitivity mask.
# Full path name to. (Default: not defined)
; mask_file value

# Dynamically create a mask file during operation (default: 0)
# Adjust speed of mask changes from 0 (off) to 10 (fast)
smart_mask_speed 0

# Ignore sudden massive light intensity changes given as a percentage of the picture
# area that changed intensity. Valid range: 0 - 100 , default: 0 = disabled
lightswitch 10

# Picture frames must contain motion at least the specified number of frames
# in a row before they are detected as true motion. At the default of 1, all
# motion is detected. Valid range: 1 to thousands, recommended 1-5
minimum_motion_frames 1

# Specifies the number of pre-captured (buffered) pictures from before motion
# was detected that will be output at motion detection.
# Recommended range: 0 to 5 (default: 0)
# Do not use large values! Large values will cause Motion to skip video frames and
# cause unsmooth mpegs. To smooth mpegs use larger values of post_capture instead.
pre_capture 2

# Number of frames to capture after motion is no longer detected (default: 0)
post_capture 0

# Gap is the seconds of no motion detection that triggers the end of an event
# An event is defined as a series of motion images taken within a short timeframe.
# Recommended value is 60 seconds (Default). The value 0 is allowed and disables
# events causing all Motion to be written to one single mpeg file and no pre_capture.
gap 60

# Maximum length in seconds of an mpeg movie
# When value is exceeded a new mpeg file is created. (Default: 0 = infinite)
max_mpeg_time 0

# Always save images even if there was no motion (default: off)
output_all on


############################################################
# Image File Output
############################################################

# Output 'normal' pictures when motion is detected (default: on)
# Valid values: on, off, first, best, center
# When set to 'first', only the first picture of an event is saved.
# Picture with most motion of an event is saved when set to 'best'.
# Picture with motion nearest center of picture is saved when set to 'center'.
# Can be used as preview shot for the corresponding movie.
# output_normal on

# Output pictures with only the pixels moving object (ghost images) (default: off)
output_motion off

# The quality (in percent) to be used by the jpeg compression (default: 75)
quality 75

# Output ppm images instead of jpeg (default: off)
ppm off


############################################################
# FFMPEG related options
# Film (mpeg) file output, and deinterlacing of the video input
# The options movie_filename and timelapse_filename are also used
# by the ffmpeg feature
############################################################

# Use ffmpeg to encode mpeg movies in realtime (default: off)
ffmpeg_cap_new on

# Use ffmpeg to make movies with only the pixels moving
# object (ghost images) (default: off)
ffmpeg_cap_motion off

# Use ffmpeg to encode a timelapse movie 
# Default value 0 = off - else save frame every Nth second
ffmpeg_timelapse 0

# The file rollover mode of the timelapse video
# Valid values: hourly, daily (default), weekly-sunday, weekly-monday, monthly, manual
ffmpeg_timelapse_mode weekly-sunday

# Bitrate to be used by the ffmpeg encoder (default: 400000)
# This option is ignored if ffmpeg_variable_bitrate is not 0 (disabled)
# ffmpeg_bps 500000

# Enables and defines variable bitrate for the ffmpeg encoder.
# ffmpeg_bps is ignored if variable bitrate is enabled.
# Valid values: 0 (default) = fixed bitrate defined by ffmpeg_bps,
# or the range 2 - 31 where 2 means best quality and 31 is worst.
ffmpeg_variable_bitrate 0

# Codec to used by ffmpeg for the video compression.
# Timelapse mpegs are always made in mpeg1 format independent from this option.
# Supported formats are: mpeg1 (ffmpeg-0.4.8 only), mpeg4 (default), and msmpeg4.
# mpeg1 - gives you files with extension .mpg
# mpeg4 or msmpeg4 - gives you files with extension .avi
# msmpeg4 is recommended for use with Windows Media Player because
# it requires no installation of codec on the Windows client.
# swf - gives you a flash film with extension .swf
# flv - gives you a flash video with extension .flv
# ffv1 - FF video codec 1 for Lossless Encoding ( experimental )
# mov - QuickTime ( testing )
ffmpeg_video_codec mpeg4

# Use ffmpeg to deinterlace video. Necessary if you use an analog camera
# and see horizontal combing on moving objects in video or pictures.
# (default: off)
ffmpeg_deinterlace off


############################################################
# Snapshots (Traditional Periodic Webcam File Output)
############################################################

# Make automated snapshot every N seconds (default: 0 = disabled)
snapshot_interval 0


############################################################
# Text Display
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second, %T = HH:MM:SS,
# %v = event, %q = frame number, %t = thread (camera) number,
# %D = changed pixels, %N = noise level, \n = new line,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event - do not use with text_event!
# You can put quotation marks around the text to allow
# leading spaces
############################################################

# Locate and draw a box around the moving object.
# Valid values: on, off and preview (default: off)
# Set to 'preview' will only draw a box in preview_shot pictures.
locate on

# Draws the timestamp using same options as C function strftime(3)
# Default: %Y-%m-%d\n%T = date in ISO format and time in 24 hour clock
# Text is placed in lower right corner
text_right %Y-%m-%d\n%T-%q

# Draw a user defined text on the images using same options as C function strftime(3)
# Default: Not defined = no text
# Text is placed in lower left corner
; text_left CAMERA %t

# Draw the number of changed pixed on the images (default: off)
# Will normally be set to off except when you setup and adjust the motion settings
# Text is placed in upper right corner
text_changes off

# This option defines the value of the special event conversion specifier %C
# You can use any conversion specifier in this option except %C. Date and time
# values are from the timestamp of the first image in the current event.
# Default: %Y%m%d%H%M%S
# The idea is that %C can be used filenames and text_left/right for creating
# a unique identifier for each event.
text_event %Y%m%d%H%M%S

# Draw characters at twice normal size on images. (default: off)
text_double off


############################################################
# Target Directories and filenames For Images And Films
# For the options snapshot_, jpeg_, mpeg_ and timelapse_filename
# you can use conversion specifiers
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = thread (camera) number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# Quotation marks round string are allowed.
############################################################

# Target base directory for pictures and films
# Recommended to use absolute path. (Default: current working directory)
 target_dir /home/will/HATestImages/axis

# File path for snapshots (jpeg or ppm) relative to target_dir
# Default: %v-%Y%m%d%H%M%S-snapshot
# Default value is equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-snapshot
# File extension .jpg or .ppm is automatically added so do not include this.
# Note: A symbolic link called lastsnap.jpg created in the target_dir will always
# point to the latest snapshot, unless snapshot_filename is exactly 'lastsnap'
snapshot_filename %v-%Y%m%d%H%M%S-snapshot

# File path for motion triggered images (jpeg or ppm) relative to target_dir
# Default: %v-%Y%m%d%H%M%S-%q
# Default value is equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-%q
# File extension .jpg or .ppm is automatically added so do not include this
# Set to 'preview' together with best-preview feature enables special naming
# convention for preview shots. See motion guide for details
jpeg_filename %v-%Y%m%d%H%M%S-%q

# File path for motion triggered ffmpeg films (mpeg) relative to target_dir
# Default: %v-%Y%m%d%H%M%S
# Default value is equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H%M%S
# File extension .mpg or .avi is automatically added so do not include this
# This option was previously called ffmpeg_filename
movie_filename %v-%Y%m%d%H%M%S

# File path for timelapse mpegs relative to target_dir
# Default: %Y%m%d-timelapse
# Default value is near equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d-timelapse
# File extension .mpg is automatically added so do not include this
timelapse_filename %Y%m%d-timelapse


############################################################
# Live Webcam Server
############################################################

# The mini-http server listens to this port for requests (default: 0 = disabled)
# webcam_port 8081

# Quality of the jpeg (in percent) images produced (default: 50) 
# webcam_quality 50

# Output frames at 1 fps when no motion is detected and increase to the
# rate given by webcam_maxrate when motion is detected (default: off)
# webcam_motion off

# Maximum framerate for webcam streams (default: 1)
webcam_maxrate 1

# Restrict webcam connections to localhost only (default: on)
# webcam_localhost on

# Limits the number of images per connection (default: 0 = unlimited)
# Number can be defined by multiplying actual webcam rate by desired number of seconds
# Actual webcam rate is the smallest of the numbers framerate and webcam_maxrate
# webcam_limit 0


############################################################
# HTTP Based Control
############################################################

# TCP/IP port for the http server to listen on (default: 0 = disabled)
control_port 8085

# Restrict control connections to localhost only (default: on)
control_localhost on

# Output for http server, select off to choose raw text plain (default: on)
control_html_output on

# Authentication for the http based control. Syntax username:password
# Default: not defined (Disabled)
# ; control_authentication username:password


############################################################
# Tracking (Pan/Tilt)
############################################################

# Type of tracker (0=none (default), 1=stepper, 2=iomojo, 3=pwc, 4=generic, 5=uvcvideo)
# The generic type enables the definition of motion center and motion size to
# be used with the conversion specifiers for options like on_motion_detected
track_type 0

# Enable auto tracking (default: off)
track_auto off

# Serial port of motor (default: none)
; track_port value

# Motor number for x-axis (default: 0)
track_motorx 0

# Motor number for y-axis (default: 0)
track_motory 0

# Maximum value on x-axis (default: 0)
track_maxx 0

# Maximum value on y-axis (default: 0)
track_maxy 0

# ID of an iomojo camera if used (default: 0)
track_iomojo_id 0

# Angle in degrees the camera moves per step on the X-axis
# with auto-track (default: 10)
# Currently only used with pwc type cameras
track_step_angle_x 10

# Angle in degrees the camera moves per step on the Y-axis
# with auto-track (default: 10)
# Currently only used with pwc type cameras
track_step_angle_y 10

# Delay to wait for after tracking movement as number
# of picture frames (default: 10)
track_move_wait 10

# Speed to set the motor to (stepper motor option) (default: 255)
track_speed 255

# Number of steps to make (stepper motor option) (default: 40)
track_stepsize 40


############################################################
# External Commands, Warnings and Logging:
# You can use conversion specifiers for the on_xxxx commands
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = thread (camera) number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# %f = filename with full path
# %n = number indicating filetype
# Both %f and %n are only defined for on_picture_save,
# on_movie_start and on_movie_end
# Quotation marks round string are allowed.
############################################################

# Do not sound beeps when detecting motion (default: on)
# Note: Motion never beeps when running in daemon mode.
quiet off

# Command to be executed when an event starts. (default: none)
# An event starts at first motion detected after a period of no motion defined by gap 
on_event_start /usr/local/etc/motionStarted.sh

# Command to be executed when an event ends after a period of no motion
# (default: none). The period of no motion is defined by option gap.
; on_event_end value

# Command to be executed when a picture (.ppm|.jpg) is saved (default: none)
# To give the filename as an argument to a command append it with %f
; on_picture_save value

# Command to be executed when a motion frame is detected (default: none)
; on_motion_detected value

# Command to be executed when motion in a predefined area is detected
# Check option 'area_detect'.   (default: none)
; on_area_detected value

# Command to be executed when a movie file (.mpg|.avi) is created. (default: none)
# To give the filename as an argument to a command append it with %f
; on_movie_start value

# Command to be executed when a movie file (.mpg|.avi) is closed. (default: none)
# To give the filename as an argument to a command append it with %f
; on_movie_end value

# Command to be executed when a camera can't be opened or if it is lost
# NOTE: There is situations when motion doesn't detect a lost camera!
# It depends on the driver, some drivers don't detect a lost camera at all
# Some hang the motion thread. Some even hang the PC! (default: none)
; on_camera_lost value

############################################################
# Common Options For MySQL and PostgreSQL database features.
# Options require the MySQL/PostgreSQL options to be active also.
############################################################

# Log to the database when creating motion triggered image file  (default: on)
sql_log_image on

# Log to the database when creating a snapshot image file (default: on)
sql_log_snapshot on

# Log to the database when creating motion triggered mpeg file (default: off)
sql_log_mpeg off

# Log to the database when creating timelapse mpeg file (default: off)
sql_log_timelapse off

# SQL query string that is sent to the database
# Use same conversion specifiers has for text features
# Additional special conversion specifiers are
# %n = the number representing the file_type
# %f = filename with full path
# Default value:
# insert into security(camera, filename, frame, file_type, time_stamp, text_event) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')
sql_query insert into security(camera, filename, frame, file_type, time_stamp, event_time_stamp) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')


############################################################
# Database Options For MySQL
############################################################

# Mysql database to log to (default: not defined)
; mysql_db value

# The host on which the database is located (default: localhost)
; mysql_host value

# User account name for MySQL database (default: not defined)
; mysql_user value

# User password for MySQL database (default: not defined)
; mysql_password value


############################################################
# Database Options For PostgreSQL
############################################################

# PostgreSQL database to log to (default: not defined)
; pgsql_db value

# The host on which the database is located (default: localhost)
; pgsql_host value

# User account name for PostgreSQL database (default: not defined)
; pgsql_user value

# User password for PostgreSQL database (default: not defined)
; pgsql_password value

# Port on which the PostgreSQL database is located (default: 5432)
; pgsql_port 5432


############################################################
# Video Loopback Device (vloopback project)
############################################################

# Output images to a video4linux loopback device
# The value '-' means next available (default: not defined)
; video_pipe value

# Output motion images to a video4linux loopback device
# The value '-' means next available (default: not defined)
; motion_video_pipe value


##############################################################
# Thread config files - One for each camera.
# Except if only one camera - You only need this config file.
# If you have more than one camera you MUST define one thread
# config file for each camera in addition to this config file.
##############################################################

# Remember: If you have more than one camera you must have one
# thread file for each camera. E.g. 2 cameras requires 3 files:
# This motion.conf file AND thread1.conf and thread2.conf.
# Only put the options that are unique to each camera in the
# thread config files. 
thread /usr/local/etc/thread1.conf
; thread /usr/local/etc/thread2.conf
; thread /usr/local/etc/thread3.conf
; thread /usr/local/etc/thread4.conf
</verbatim>

thread1.conf file

<verbatim>
# /usr/local/etc/thread1.conf
#
# This config file was generated by motion 3.2.12 



###########################################################
# Capture device options
############################################################

# Videodevice to be used for capturing  (default /dev/video0)
# for FreeBSD default is /dev/bktr0 
# videodevice /dev/video0

# The video input to be used (default: 8)
# Should normally be set to 1 for video/TV cards, and 8 for USB cameras 
# input 8

# Draw a user defined text on the images using same options as C function strftime(3)
# Default: Not defined = no text
# Text is placed in lower left corner
text_left CAMERA 1


############################################################
# Target Directories and filenames For Images And Films
# For the options snapshot_, jpeg_, mpeg_ and timelapse_filename
# you can use conversion specifiers
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = thread (camera) number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# Quotation marks round string are allowed.
############################################################

# Target base directory for pictures and films
# Recommended to use absolute patch. (Default: current working directory)
# target_dir /home/will/HATestImages


############################################################
# Live Webcam Server
############################################################

# The mini-http server listens to this port for requests (default: 0 = disabled)
# webcam_port 8081

# Command to be executed when a picture (.ppm|.jpg) is saved (default: none)
# The filename of the picture is appended as an argument for the command.
# on_picture_save /home/will/HATestImages/webcamparse1.pl

# Command to be executed when a movie file (.mpg|.avi) is closed. (default: none)
# Filename of movie is appended as an argument for the command.
# on_movie_end /home/will/HATestImages/webcammpegparse1.pl 
</verbatim>

Debug output

<verbatim>
[0] Processing thread 0 - config file /etc/motion/motion.conf
[0] Processing config file /usr/local/etc/thread1.conf
[0] Motion 3.2.12 Started
[0] ffmpeg LIBAVCODEC_BUILD 3482112 LIBAVFORMAT_BUILD 3478528
[0] Thread 1 is from /usr/local/etc/thread1.conf
[0] motion-httpd/3.2.12 running, accepting connections
[0] motion-httpd: waiting for data on port TCP 8085
[1] Thread 1 started
[1] entered netcam_start()
[1] Camera thread starting...
[1] Entry netcam_url_parse data http://169.254.71.156/mjpg/video.mjpg
[1] Parse case 0 data http://169.254.71.156/mjpg/video.mjpg
[1] Parse case 1 data http
[1] Parse case 6 data 169.254.71.156
[1] Parse case 9 data /mjpg/video.mjpg
[1] netcam_start: Netcam_http parameter '1.1' converts to flags: HTTP1.0:0 HTTP1.1: 1 Keep-Alive ON.
[1] netcam_start: now calling netcam_setup_html()
[1] netcam_setup_html: Netcam has flags: HTTP1.0: 0 HTTP1.1: 1 Keep-Alive ON.
[1] Camera connect string is ''GET /mjpg/video.mjpg HTTP/1.1
Host: 169.254.71.156
User-Agent: Motion-netcam/3.2.12
Connection: Keep-Alive
Authorization: Basic cm9vdDp6aXJjb24=

''
[1] End of camera connect string.
[1] netcam_setup_html: about to try to connect, time #0
[1] netcam_connect with keepalive set, invalid socket.This could be first time, created a new one with fd 5
[1] netcam_connect: SO_KEEPALIVE is OFF
[1] netcam_connect: SO_KEEPALIVE set on socket.
[1] Received first header ('HTTP/1.0 200 OK')
[1] Received first header ('Cache-Control: no-cache')
[1] Received first header ('Pragma: no-cache')
[1] Received first header ('Expires: Thu, 01 Dec 1994 16:00:00 GMT')
[1] Received first header ('Connection: close')
[1] Found Conn:close header ('Connection: close')
[1] Received first header ('Content-Type: multipart/x-mixed-replace; boundary=myboundary')
[1] Streaming camera
[1] Boundary string [myboundary]
[1] Received first header ('')
[1] Found image header record
[1] netcam_setup_html: connected, going on to read image.
[1] expanding buffer from 0 to 4096 bytes
[1] expanding buffer from 4096 to 8192 bytes
[1] expanding buffer from 8192 to 12288 bytes
[1] expanding buffer from 12288 to 16384 bytes
[1] expanding buffer from 16384 to 20480 bytes
[1] expanding buffer from 20480 to 24576 bytes
[1] expanding buffer from 24576 to 28672 bytes
[1] expanding buffer from 28672 to 32768 bytes
[1] expanding buffer from 32768 to 36864 bytes
[1] expanding buffer from 36864 to 40960 bytes
[1] expanding buffer from 40960 to 45056 bytes
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_get_dimensions: JFIF_marker IS PRESENT ret 0
[1] Resizing pre_capture buffer to 1 items
[1] Camera handler thread [2]  started
[1] Resizing pre_capture buffer to 3 items
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] Found image header record
[1] expanding buffer from 0 to 4096 bytes
[1] expanding buffer from 4096 to 8192 bytes
[1] expanding buffer from 8192 to 12288 bytes
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] expanding buffer from 12288 to 16384 bytes
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] expanding buffer from 16384 to 20480 bytes
[1] expanding buffer from 20480 to 24576 bytes
[1] expanding buffer from 24576 to 28672 bytes
[1] expanding buffer from 28672 to 32768 bytes
[1] expanding buffer from 32768 to 36864 bytes
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] expanding buffer from 36864 to 40960 bytes
[1] expanding buffer from 40960 to 45056 bytes
[1] Calculated frame time 58077.398438
[1] netcam_proc_jpeg: processing jpeg image - content length 41844
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 41937
[0] DEBUG-2 threads_running 2 motion_threads_running 1 , finish 0
[1] Found image header record
[1] expanding buffer from 0 to 4096 bytes
[1] expanding buffer from 4096 to 8192 bytes
[1] expanding buffer from 8192 to 12288 bytes
[1] expanding buffer from 12288 to 16384 bytes
[1] expanding buffer from 16384 to 20480 bytes
[1] expanding buffer from 20480 to 24576 bytes
[1] expanding buffer from 24576 to 28672 bytes
[1] expanding buffer from 28672 to 32768 bytes
[1] expanding buffer from 32768 to 36864 bytes
[1] expanding buffer from 36864 to 40960 bytes
[1] expanding buffer from 40960 to 45056 bytes
[1] Calculated frame time 101185.156250
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 41844
[1] Found image header record
[1] Calculated frame time 141703.734375
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 41756
[0] DEBUG-2 threads_running 2 motion_threads_running 1 , finish 0
[1] Found image header record
[1] Calculated frame time 176951.656250
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 41625
[1] Found image header record
[1] Calculated frame time 210514.296875
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 41308
[0] DEBUG-2 threads_running 2 motion_threads_running 1 , finish 0
[1] Found image header record
[1] Calculated frame time 237967.968750
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 41394
[1] Found image header record
[1] Calculated frame time 265598.875000
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 41334
[0] DEBUG-2 threads_running 2 motion_threads_running 1 , finish 0
[1] Found image header record
[1] Calculated frame time 287420.375000
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 41293
[1] Found image header record
[1] Calculated frame time 309761.125000
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 41168
[0] DEBUG-2 threads_running 2 motion_threads_running 1 , finish 0
[1] Found image header record
[1] Calculated frame time 329556.125000
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 38326
[1] Found image header record
[1] Calculated frame time 344761.718750
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 38775
[0] DEBUG-2 threads_running 2 motion_threads_running 1 , finish 0
[1] Found image header record
[1] Calculated frame time 361532.656250
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 42690
[1] Found image header record
[1] Calculated frame time 374879.375000
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 42705
[0] DEBUG-2 threads_running 2 motion_threads_running 1 , finish 0
[1] Found image header record
[1] Calculated frame time 387372.250000
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 43023
[1] Found image header record
[1] Potential split boundary - 1447 chars flushed, 1 re-positioned
[1] Calculated frame time 399859.812500
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 42945
[0] DEBUG-2 threads_running 2 motion_threads_running 1 , finish 0
[1] Found image header record
[1] Potential split boundary - 1447 chars flushed, 1 re-positioned
[1] Calculated frame time 410049.218750
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 42221
[1] Found image header record
[1] Calculated frame time 419962.812500
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 42774
[0] DEBUG-2 threads_running 2 motion_threads_running 1 , finish 0
[1] Found image header record
[1] Calculated frame time 425655.531250
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 41526
[1] Found image header record
[1] Calculated frame time 433502.468750
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 23021
[0] DEBUG-2 threads_running 2 motion_threads_running 1 , finish 0
[1] Found image header record
[1] Calculated frame time 441545.218750
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 31035
[1] Found image header record
[1] Calculated frame time 447465.687500
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 43755
[0] DEBUG-2 threads_running 2 motion_threads_running 1 , finish 0
[1] Found image header record
[1] Calculated frame time 451776.031250
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 43804
[1] Found image header record
[1] Calculated frame time 456225.812500
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 40943
[0] DEBUG-2 threads_running 2 motion_threads_running 1 , finish 0
[1] Found image header record
[1] Calculated frame time 462108.343750
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 41776
[1] Found image header record
[1] Calculated frame time 464862.125000
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 43464
[0] DEBUG-2 threads_running 2 motion_threads_running 1 , finish 0
[1] Found image header record
[1] Calculated frame time 469416.312500
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 44474
[1] Found image header record
[1] Calculated frame time 471604.781250
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 44180
[0] DEBUG-2 threads_running 2 motion_threads_running 1 , finish 0
[1] Found image header record
[1] Calculated frame time 475007.000000
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 40355
[1] Found image header record
[1] Calculated frame time 477088.812500
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 38811
[0] DEBUG-2 threads_running 2 motion_threads_running 1 , finish 0
[1] Found image header record
[1] expanding buffer from 45056 to 49152 bytes
[1] Calculated frame time 478230.031250
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 35501
[1] Found image header record
[1] Calculated frame time 481894.625000
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 45755
[0] DEBUG-2 threads_running 2 motion_threads_running 1 , finish 0
[1] Found image header record
[1] Calculated frame time 483155.656250
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 42189
[1] Found image header record
[1] Calculated frame time 484898.281250
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 41435
[0] DEBUG-2 threads_running 2 motion_threads_running 1 , finish 1
[0] httpd - Finishing
[0] httpd Closing
[0] httpd thread exit
[1] Found image header record
[1] Calculated frame time 487533.250000
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Thread exiting
[1] Calling vid_close() from motion_cleanup
[1] vid_close: calling netcam_cleanup
[1] Found image header record
[1] Calculated frame time 488981.937500
[1] netcam camera handler: finish set, exiting
[0] DEBUG-1 threads_running 0 motion_threads_running 0 , finish 1
[0] Motion terminating
</verbatim>

Could find no related syslogs in /var/logs

Environment

Motion version:	3.2.12
ffmpeg version:	Gstream 0.10
Libraries:	ffmpeg, mysql, postgresql
Server OS:	Ubuntu Studio 12.04 kernel 3.2.0-55-generic

-- WillStewart - 30 Oct 2013

Answer