Motion - Web Index

You are here: Foswiki>Motion Web>WebIndex (19 Aug 2014, KennethLavrsen)Edit Attach

Detailed topic list for Motion Web

Results from Motion web retrieved at 17:25 (GMT)

Note that each camera thread must have its own unique port number and it must also be different from the webcontrol_port number. A good value to select is 8081 fo...

r2 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionStreamPreviewNewline

Preview images are placed on to the webcontrol home page in thread number order. This parameter allows the user some flexibility in organizing the images on the p...

r2 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionStreamPreviewScale

r2 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionStreamQuality

The mjpeg stream consists of a header followed by jpeg frames separated by content length and boundary string. The quality level defines the size of the individua...

r2 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionSwitchfilter

This is a round robin related feature used when you have a capture card with multiple inputs (controlled by the 'input' option) on the same videodevice.

r12 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTargetDir

This is the target directory for all snapshots, images files and movie files. You will normally always want to specify this parameter as an absolute path. Note t...

r7 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTemplate

%NOP{ * Note: Do not edit this topic. Go to relevant ConfigFileOptions topic * Set ALLOWTOPICCHANGE = Main.AdminGroup }%

r5 - 07 Aug 2016 - 21:25 by KennethLavrsen

ConfigOptionTextChanges

By setting this option to 'on' the number of pixels that changed compared to the reference frame is displayed in the upper right corner of the pictures. This is g...

r6 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTextDouble

This option makes the text defined by text_left, text_right and text_changes twice the normal size. This may be useful when using large picture formats such as 64...

r4 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTextEvent

The idea is that %C can be used filenames and text_left/right for creating a unique identifier for each event. Option text_event defines the value %C which then ...

r5 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTextLeft

text_left is displayed in the lower left corner of the pictures. If the option is not defined no text is displayed at this position. You can place the text in quo...

r11 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTextRight

text_right is displayed in the lower right corner of the pictures. If the option is not defined no text is displayed at this position. You can place the text in q...

r11 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionThread

This is used when you have more than one camera/device. The single camera can get all its options from the default motion.conf file. If you have two or more camer...

r9 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionThreshold

The 'threshold' option is the most important detection setting. When motion runs it compares the current image frame with the previous and counts the number of ch...

r15 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionThresholdTune

This feature makes Motion continuously adjust the threshold for declaring motion. The threshold setting is ignored when activating this feature. It may give diffe...

r8 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTimelapseFilename

Default value is equivalent to legacy 'oldlayout' option. File extension .mpg is automatically added so do not include this. This option uses conversion specifier...

r6 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTrackAuto

Requires a tracking camera type supported by Motion.

r3 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTrackIomojoId

Only used for iomojo camera.

r6 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTrackMaxx

Only used for stepper motor tracking.

r7 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTrackMaxy

Only used for stepper motor tracking.

r4 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTrackMotorx

Only used for stepper motor tracking.

r5 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTrackMotory

Only used for stepper motor tracking.

r4 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTrackMoveWait

The actual delay is depending on the chosen framerate. If you want the camera to move maximum once every 2 seconds and the framerate is 10 then you need to set th...

r4 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTrackPort

Only used for stepper motor tracking.

r4 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTrackSpeed

Only used for stepper motor tracking.

r4 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTrackStepAngleX

Requires a tracking camera type pwc

r3 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTrackStepAngleY

Requires a tracking camera type pwc

r3 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTrackStepsize

Only used for stepper motor tracking.

r4 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTrackType

Motion has special tracking options which use either a serial stepper motor controller, an iomojo smile cam or a Philips WebCam driver compatible pan/tilt camera ...

r10 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTunerdevice

Make sure to remove or comment out this option when running Motion under Linux.

r6 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionV4L2Palette

Supported values are Value Name Short 0 V4L2_PIX_FMT_SN9C10X S910 1 V4L2_PIX_FMT_SBGGR16 BYR2 2 V4L2_PIX_FMT_SBGGR8 BA81 ...

r7 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionVideoPipe

Using this you can view the results in real time. E.g. by using the program camstream. Disable this option by not having it in the config file (or comment it out ...

r5 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionVideodevice

This is the video4linux device name. Ignore this for net cameras.

r6 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionViewTemplate

* Type: * Range / Valid values: * Default: * Group: #TopicEnd

r3 - 05 Jan 2019 - 21:52 by KennethLavrsen

ConfigOptionWebcamLimit

Number can be defined by multiplying actual webcam rate by desired number of seconds. Actual webcam rate is the smallest of the numbers framerate and webcam_maxra...

r3 - 07 Aug 2016 - 15:28 by KennethLavrsen

ConfigOptionWebcamLocalhost

By setting this to on, the webcam can only be accessed on the same machine on which Motion is running.

r3 - 07 Aug 2016 - 15:31 by KennethLavrsen

ConfigOptionWebcamMaxrate

Don't set 'webcam_maxrate' too high unless you only use it on the localhost or on an internal LAN.

r6 - 07 Aug 2016 - 15:33 by KennethLavrsen

ConfigOptionWebcamMotion

Use this option to save bandwidth when there is not anything important to see from the camera anyway. Note that this feature was greatly improved from Motion vers...

r4 - 07 Aug 2016 - 15:37 by KennethLavrsen

ConfigOptionWebcamPort

Note that each camera thread must have its own unique port number and it must also be different from the control_port number. A good value to select is 8081 for c...

r7 - 07 Aug 2016 - 15:24 by KennethLavrsen

ConfigOptionWebcamQuality

The mjpeg stream consists of a header followed by jpeg frames separated by content length and boundary string. The quality level defines the size of the individua...

r4 - 07 Aug 2016 - 15:40 by KennethLavrsen

ConfigOptionWebcontrolAuthentication

By setting this to on, the control using http (browser) can only be accessed using login and password ( following the Basic Authentication defined in HTTP RFC )

r2 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionWebcontrolHtmlOutput

The recommended value for most is "on" which means that you can navigate and control Motion with a normal browser. By setting this option to "off" the replies are...

r2 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionWebcontrolLocalhost

By setting this to on, the control using http (browser) can only be accessed on the same machine on which Motion is running.

r2 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionWebcontrolPort

This sets the TCP/IP port number to be used for control of motion using http (browser). Port numbers below 1024 normally requires that you have root privileges. P...

r2 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionWidth

Motion does not scale so should be set to the actual size of the v4l device. In case of a net camera motion sets the height to the height of the first image read....

r7 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigRangeCheckingDiscussion

Config Range Checking Discussion This topic is created to make an overview of config options and their range, valid values and defaults Config Options type, ra...

r2 - 09 Apr 2005 - 19:47 by KennethLavrsen

ConfigureScript

Configure Script Configure is script that you run to setup the build environment for the C compiler. It generates the "Makefile" which the program "make" uses t...

r6 - 07 May 2008 - 03:59 by AngelCarpintero

ConfigureTweaks

Some autoconf portability improvements Description of Patch While hacking on Motion on OSX and OpenBSD I have had to adjust configure.in to make fewer assumption...

r8 - 24 Apr 2014 - 04:40 by DavidWales

ConversionSpecifiers

Conversion Specifiers for Advanced Filename and Text Features The table below shows all the supported Conversion Specifiers you can use in the options text_event,...

r10 - 21 Dec 2005 - 22:05 by KennethLavrsen

ConvertSignalToSigaction

Convert signal to sigaction Introduction Replace use of signal function by sigaction. Description of Patch Currently, motion is using signal() function. There i...

r12 - 13 Aug 2005 - 20:49 by KennethLavrsen

Number of topics: 50

< Previous Page 11 of 41 Next >