Detailed topic list for Motion Web

Results from Motion web retrieved at 14:16 (GMT)

SupportQuestion2008x07x14x124819

Question Hello, I am using motion with a Logitech Quickcam Pro 9000. Everything was fine, so I decided to add a new webcam, and bought the same as the first. I co...

r6 - 05 Aug 2009 - 16:36 by AngelCarpintero

SupportQuestion2008x07x15x122912

Question Hello The movie and snapshot from the motion are ok but I have no pictuires/movie on the Browser (8081), it's just black but I can see some moving shap (...

r2 - 15 Jul 2008 - 15:08 by AngelCarpintero

SupportQuestion2008x07x24x090621

Question I'm using motion with an Hercules/Guillemot Webcam (uvc, v4l2 only) Dualpix Exchange. Rotating by 180 degrees has no effect. When I try to rotate by 90/2...

r9 - 25 Jul 2008 - 18:43 by AngelCarpintero

SupportQuestion2008x07x28x151056

Question Is it possible somehow to record mpg or avi files with sound, not just silent movies? Upon motion detected I would like to record a movie with sound, usi...

r2 - 29 Jul 2008 - 12:35 by AngelCarpintero

SupportQuestion2008x07x31x193659

Question I have tested on Firefox 2 3, and the Motion works great. However, When I open( http://mydomain:8081) in IE, it keeps asking me to download a file with...

r3 - 01 Aug 2008 - 08:23 by TerenceKa

SupportQuestion2008x08x14x014531

Question I am trying to use dv4l vloopback motion to capture images off my DV camcorder via firewire (ieee1394). Everything works, but Motion segfaults after ...

r3 - 06 Aug 2009 - 00:49 by AngelCarpintero

SupportQuestion2008x09x06x185013

Question I setup motion on a Slackware 10.2 system (kernel 2.4 with v4l). I installed from sources. I am using a flyvideo LR38 card. This card does not have a tun...

r3 - 09 Aug 2009 - 23:58 by AngelCarpintero

SupportQuestion2008x09x06x204711

Question I would like to know if there is a way to immediately save a picture when motion ist detected. I set gap to 10 and output_normal to "first". It seems mot...

r2 - 07 Sep 2008 - 02:15 by AngelCarpintero

SupportQuestion2008x09x11x151751

Question For security purposes we've installed 2 webcams in our datacenter server rack, in combination with motion, to monitor our rack. One webcam works just fin...

r3 - 09 Aug 2009 - 23:59 by AngelCarpintero

SupportQuestion2008x09x18x094735

Question when capturing from bt878 with video cam connected, the very top of an image is ok, but the rest of image is covered by green lines, when resolution is g...

r2 - 09 Aug 2009 - 22:40 by AngelCarpintero

SupportQuestion2008x10x20x200544

Question This is a phillips laptop usb camera with lamp, but not detected as pwc. motion r432 can't get a palette, and no output occurs. kernel 2.6.27 64 bit 0 ...

r5 - 06 Aug 2009 - 00:51 by AngelCarpintero

SupportQuestion2008x10x21x165451

Question We have configured motion to have ffmpeg encode video on the fly. When we encode to flv the motion of the videos is really fast. It looks like all the fr...

r6 - 28 Jan 2011 - 21:15 by FlorinAnton

SupportQuestion2008x10x25x070400

Question Hello. I have faced a problem. Through an auto update, the operating system has refreshed a package ffmpeg to the version 0.4.9.15594svn 20081010.pm.2143...

r2 - 25 Oct 2008 - 16:37 by AngelCarpintero

SupportQuestion2008x10x25x221655

Question Segmentation fault at start motion when webcontrol_localhost it is installed in off 0 httpd_run: motion httpd testing : IPV4 addr: 0.0.0.0 port: 8080 ...

r3 - 26 Oct 2008 - 07:10 by RafisKhayrullin

SupportQuestion2008x11x04x163459

Question Hi there, I just did a fresh install of Ubuntu 8.10, an apt get install motion from the repositories of 3.2.9, and a Logitech Quickcam Orbit MP. Out of t...

r3 - 19 Nov 2008 - 01:57 by AngelCarpintero

SupportQuestion2008x11x09x151456

Question Hello, I've got quite a story regarding my problem. It started when i updated my distribution from Ubuntu 8.04 to Ubuntu 8.10 The ffmpeg version was upda...

r12 - 17 Nov 2008 - 10:11 by AngelCarpintero

SupportQuestion2008x11x12x151558

Question I have NTSC composite cameras and a capture card. Works well since I upgraded to a BT capture board with one chip per camera. I'm currently capturing 640...

r2 - 17 Nov 2008 - 10:59 by AngelCarpintero

SupportQuestion2008x11x15x193529

Question I want to try Motion. But my actual version of ffmpeg is 0.4.9.15793svn 20081108.pm.1300 on opensuse 11. I have tried to complie source code of 0.4.8 ver...

r3 - 06 Aug 2009 - 00:38 by AngelCarpintero

SupportQuestion2008x11x18x145843

Do not edit title above. Edit the TopicTitle field in the form at the bottom Question I get a Segmentation Fault wenn I try to use that Camera. munin.conf: vi...

r3 - 09 Aug 2009 - 20:25 by AngelCarpintero

SupportQuestion2008x11x24x061426

Question I downloaded Motion from here: http://packages.ubuntu.com/intrepid/graphics/motion , and installed it, ffmpeg, and mysql client (and all of the packages ...

r2 - 25 Nov 2008 - 04:24 by AngelCarpintero

SupportQuestion2008x11x24x152809

Question I installed the latest version of the motion, I have completed and everything worked properly except for the inclusion of records in the mysql DB. In the...

r2 - 25 Nov 2008 - 04:28 by AngelCarpintero

SupportQuestion2008x11x26x045839

Question I've restarted Motion, and now I'd like to control it. In Firefox, using the same box that Motion is installed on, and into which the webcam is plugged, ...

r2 - 27 Nov 2008 - 03:38 by AngelCarpintero

SupportQuestion2008x11x26x053107

Question My camera, a Logitech Quickcam OrbitMP, is a "working device", I believe. http://www.lavrsen.dk/twiki/bin/view/Motion/WorkingDevices#Logitech_OrbitMP_200...

r2 - 27 Nov 2008 - 03:35 by AngelCarpintero

SupportQuestion2008x11x27x085548

Question I set the parameters for authentication with username and password, but would not request anything. How can I protect the view of the camera from http? I...

r2 - 28 Nov 2008 - 02:57 by AngelCarpintero

SupportQuestion2008x11x28x094523

Question I have recently purchased two single channel video servers http://www.acti.com/CatalogV5/Product_Information.asp?PART_NO=ACD 2100 to provide remote analo...

r2 - 26 Sep 2014 - 19:03 by TosiaraT

SupportQuestion2008x11x28x155230

Question Why when I play videos created with .flv codec not keep the original speed? In play mode is very speed, I tried with the framerate 2, framerate 10, frame...

r3 - 12 Dec 2008 - 09:29 by AngelCarpintero

SupportQuestion2008x11x29x173230

Question Hello, I currently have motion set up to not detect motion, but to save a snapshot from the webcam every 60 seconds... and my problem is that this webcam...

r2 - 29 Nov 2008 - 20:12 by AngelCarpintero

SupportQuestion2008x12x04x005407

Question I'm using several computers with Motion simply to convert webcams to "netcams", and the captures are done by a main server with other motion. Is there an...

r3 - 05 Dec 2008 - 17:35 by AngelCarpintero

SupportQuestion2008x12x09x202803

Question I am using Motion for a few years now, but recently moved my server to a hosting area. This resulted in bandwith problems, so I thought making time based...

r7 - 14 Dec 2008 - 14:38 by AuxAux

SupportQuestion2008x12x11x134201

Question Hi I've compiled motion for a Nokia N810 tablet, and it runs fine in non daemon mode. But in daemon mode, it starts up successfully, but dies. Not quite...

r6 - 21 Mar 2010 - 18:53 by AngelCarpintero

SupportQuestion2009x01x11x213342

Question Motion does not start in conjunction with dv4l, showing errors, se below. Using other applications through /dev/video1, the images are: camorama: ok (but...

r3 - 09 Aug 2009 - 20:28 by AngelCarpintero

SupportQuestion2009x01x12x192608

Question Dear Developers, I tried to install 3.2.11 on opensuse 11.1 and 10.3 (32bit) (had 3.2.10 up and running on 10.3 about a year ago). It won't compile. (I u...

r5 - 01 Mar 2009 - 23:51 by AngelCarpintero

SupportQuestion2009x01x15x203927

Question Hi, I have two cameras (one speedlink and another one), both seem to use the same driver. I can get images using 'webcam', so I guess they are functional...

r4 - 22 Jan 2009 - 20:19 by AngelCarpintero

SupportQuestion2009x01x16x023720

Question Hi I was thinking of using Ubuntu Server version for my motion machine. The specs for the server edition say that preemption is turned off. Does this mak...

r2 - 05 Aug 2009 - 19:41 by AngelCarpintero

SupportQuestion2009x01x20x183230

Question Is the P207 palette unsupported? motion n 3.2.11 segfaults after being unable to connect to the device. The kernel is gentoo 2.6.28 0 Processing threa...

r7 - 03 Mar 2013 - 23:56 by ChrisBlack

SupportQuestion2009x01x22x005107

Question Motion seems to be working well! I can see live video on the monitor of the Ubuntu box, from the connected camera. But I'd like to see if Motion has capt...

r4 - 31 Jan 2009 - 18:17 by AngelCarpintero

SupportQuestion2009x01x29x022800

Question Hi, my motion work very fine, but only in Mozilla Firefox, when I try load the ip server with internet explore, it ask me save the file, but it doesn't a...

r2 - 31 Jan 2009 - 18:29 by AngelCarpintero

SupportQuestion2009x02x03x142324

Question Hi, I have a problem with the eventnumbers written by motion into the mysql database. Every day at 6pm my motion is killed and restarted by a cronjob. Th...

r2 - 14 Feb 2009 - 22:09 by AngelCarpintero

SupportQuestion2009x02x28x204104

Question I'm attempting to "webstream" a Canon VB 50CFi using the netcam_url directive in motion.conf. The Motion FAQ page says this about this camera: Canon Netw...

r5 - 10 Aug 2009 - 00:00 by AngelCarpintero

SupportQuestion2009x03x02x193755

Question Hi, great project ! I have 2 questions and maybe future features. Is there any option to enable HTTP password for streaming port same as the one for the ...

r2 - 03 Mar 2009 - 00:56 by AngelCarpintero

SupportQuestion2009x03x06x122138

Question I can't install V4L2, give me error (1) i already install pwc (pwc 10.0.5 1.src.rpm). But in the motion guide says it's not need install V4L2, because it...

r2 - 09 Mar 2009 - 04:33 by AngelCarpintero

SupportQuestion2009x03x19x222302

Question When I connect my webcam by a USB 1.1 port to my notebook and start motion, I get the message, that only the palette MJPG (MJPEG) is supported. When I co...

r2 - 09 Jul 2009 - 08:27 by AngelCarpintero

SupportQuestion2009x03x19x233334

Question When I connect an other webcam by a USB 1.1 port to my notebook and start motion, I get the message, that only the palette MJPG (MJPEG) is supported. Aft...

r6 - 10 Aug 2009 - 00:21 by AngelCarpintero

SupportQuestion2009x03x23x115315

Question Hi I have tried multiple ways and various methods to use the on_movie_end option, but to no avail. No matter what I try, nothing happens and motion doesn...

r10 - 11 Nov 2011 - 18:08 by JohnR

SupportQuestion2009x04x12x141907

Question When I start motion executable , how can I list to stdout only the current config options that it is read from configuration file motion.conf ???... I ha...

r3 - 09 Jul 2009 - 09:00 by AngelCarpintero

SupportQuestion2009x04x13x194312

Question Hi, 1001 thanks for a good product, it works wonderful on my nslu2/debian5/Logitech quickcam E3500. You have the option "control_authentication" for the...

r2 - 09 Jul 2009 - 08:57 by AngelCarpintero

SupportQuestion2009x04x16x092113

Question Using Motion 3.2.10.1 on OpenWRT KAMIKAZE (8.09, r14511) (Linux OpenWrt 2.6.25.17) with USV driver and Logitech Quickcam Sphere AF I get "Error capturing...

r2 - 09 Jul 2009 - 08:59 by AngelCarpintero

SupportQuestion2009x04x30x053208

Question I installed 9.04 on a desktop (clean install on a different Hard Drive) that had been running motion quite nicely. The webcam worked and I had it set up ...

r3 - 12 Jul 2009 - 09:56 by AngelCarpintero

SupportQuestion2009x05x01x122434

Question I am a complete beginner when it comes to all this stuff so pleas bear with me. I currently have Ubuntu 9.04 installed, and I have also installed Motion...

r3 - 05 Aug 2009 - 19:47 by AngelCarpintero

SupportQuestion2009x05x01x150546

Question Hello, I have a Ubuntu 8.10 server running at home, and would like to include 2 same webcams. The setting of 2 devices with Motion presents no problem. H...

r2 - 05 Aug 2009 - 19:49 by AngelCarpintero

Number of topics: 50

< Previous Page 31 of 41 Next >