Detailed topic list for Motion Web

Results from Motion web retrieved at 12:19 (GMT)

SupportQuestion2014x02x21x145549

Question Hi, I have tried in a lot of and well documented options related to the Motion application, but I haven't find out a setting which allow to bind the acce...

r2 - 24 Feb 2014 - 05:59 by AngelCarpintero

SupportQuestion2014x02x26x164339

Question I was running motion with 2 analog cameras connected to a standard 4 video in audio to usb adapter. (Bus 002 Device 002: ID 05e1:0408 Syntek Semiconduc...

r3 - 11 Nov 2014 - 01:58 by JulioReson

SupportQuestion2014x02x26x213359

Question I have setup motion with two types of video capture devices. One type are USB cameras and the second are old phones sitting on their own URL. Both device...

r2 - 28 Feb 2014 - 00:46 by AngelCarpintero

SupportQuestion2014x03x11x185332

Question Hi, I have 2 stk1160 based USB capture cards, and I think I'm encountering some sort of race condition somewhere between them and Motion. If I unload and...

NEW - 11 Mar 2014 - 18:58 by PratFall

SupportQuestion2014x03x17x135317

Question motion shipped with ubuntu 10.04 is very old. To get working video pipe functionality trying to compile from svn trunk. Got built ffmpeg from git with sh...

r4 - 26 Mar 2014 - 13:06 by KarelH

SupportQuestion2014x03x22x041923

Question Hello, I am using motion on a linux POS reader where requires to detect a motion as fast as possible, the current speed varies and sometime a little long...

NEW - 22 Mar 2014 - 04:31 by HunterHu

SupportQuestion2014x03x25x074914

Question Hi all, The motion httpd watch dog times out, and I was wondering if there was a way to get a descriptive error message for diagnosing the problem or a d...

NEW - 25 Mar 2014 - 07:52 by CharlesMoyes

SupportQuestion2014x03x27x152142

Question Hello! I have a problem with taking snapshots from a webcam with motion. If I take a snapshot with an interval of less than 10s, the snapshot gets taken ...

NEW - 27 Mar 2014 - 15:38 by EnzoBrands

SupportQuestion2014x03x29x023716

Question I have Raspberry Pi I want record my IP Camera using motion in realtime even no motion were detected and split the video ex : Hourly , Daily , Monthly th...

NEW - 29 Mar 2014 - 02:52 by IrvanKro

SupportQuestion2014x03x30x071708

Question I just cannot get Motion to be controlled via the cron/script. I'm trying to change the threshold by entering this line at the command line: sudo /usr/bi...

NEW - 30 Mar 2014 - 07:40 by ReggieNoo

SupportQuestion2014x03x30x154627

Question Does anyone have a good idea to my problem? I want to have 2 cameras watching the same scene and in order to avoid false alarms i want to configure motio...

r2 - 08 Apr 2014 - 10:31 by DazzConway

SupportQuestion2014x04x16x170718

Question I have motion running with 2 webcams. Only one works, other does not provide video. Tried lowering resolution with no luck. Running xubuntu on ARM (odroi...

NEW - 16 Apr 2014 - 17:08 by PanosXatzi

SupportQuestion2014x04x16x172912

Question This was resolved...I forgot the c option for the config and the default value was for pal and I am using NTSC This works great and I got it going quick...

NEW - 16 Apr 2014 - 18:59 by GlennTelleed

SupportQuestion2014x04x18x195757

Question Hi, I have the need to increase the fps saved in the timelapse file. The code of the timelapse in the main loop seems to be: if (cnt shots == 0 time...

NEW - 18 Apr 2014 - 20:10 by VitoAmmirata

SupportQuestion2014x04x21x165916

Question Hello ! Is it possible do disable the movement detection but keep the other features like the streaming ? I'm using Motion on a Raspberry Pi PiCamera a...

r4 - 26 Sep 2014 - 18:56 by TosiaraT

SupportQuestion2014x05x06x220454

Question Hello, I installed the Motion package on my RPi (v2, with Debian) with a RPi camera using the instructions given at http://www.codeproject.com/Articles/6...

r4 - 12 Apr 2015 - 09:42 by TosiaraT

SupportQuestion2014x05x07x174105

Question How can I export the coordinates of the center of the moving object? (the %K and %L) I #39;m using motion in a Raspberry Pi and would like to know how ca...

NEW - 07 May 2014 - 17:43 by HenriqueAndrade

SupportQuestion2014x05x09x205511

Question Hello I wanted to send jpg pictures taken by Motion to my ftp server: on_picture_save wput B ftp://userID:password@ftp.site.com %f This does not work (n...

r2 - 28 Sep 2014 - 14:06 by TosiaraT

SupportQuestion2014x05x11x125210

Question Hi, i use Motion a few years with a couple of camera's. I run it on my Raspberry Pi. Now i bought a new camera (Vanxse V B810 / Onvif) i cannot connect t...

r2 - 26 Sep 2014 - 18:59 by TosiaraT

SupportQuestion2014x05x13x130623

Question Can these two options be combined i.e. use smart masking within an area defined by a static mask? Or are they mutually exclusive? Environment Motion ...

NEW - 13 May 2014 - 13:09 by KyuzoUzumaki

SupportQuestion2014x05x24x055700

Question I am trying to use the postgresql feature of Motion, and I bumped into an error that says: PGSQL query failed: Success Google searching reveals a posting...

NEW - 24 May 2014 - 05:57 by AlanLai

SupportQuestion2014x06x05x083851

Question Hi. ubuntu 14.04 x64 motion 3.2.12 4 Trendnet TV IP651W error libjpeg decompression failure on first frame giving up! help ) motion.conf daemon off s...

r2 - 26 Sep 2014 - 18:46 by TosiaraT

SupportQuestion2014x06x05x233221

Question Hello I am very satisfied with your project. I would like to change the configuration file that motion is recording all the time with a video length of 1...

NEW - 05 Jun 2014 - 23:39 by GoekhanSevo

SupportQuestion2014x07x12x080830

Question I have installed motion Version trunkREV561 on Xubuntu 14.04. Tested configuration with one (and two) IP camera(s) using snapshot jpg's. Motion seems to ...

r4 - 28 Sep 2014 - 14:07 by TosiaraT

SupportQuestion2014x07x12x181448

Question Hi, How can i save my image as bmp extension # V4L2 _PIX_FMT_SN9C10X : 0 'S910' # V4L2 _PIX_FMT_SBGGR8 : 1 'BA81' # V4L2 _PIX_FMT_MJPEG : 2 'MJPEG'...

r2 - 26 Sep 2014 - 18:25 by TosiaraT

SupportQuestion2014x07x18x190312

Question Is there a limit on the number of IP cameras that can be monitored with Motion 3.2.12 (e.g. Foscam FI890W)? When I get above 5 cameras there are some ...

r2 - 26 Sep 2014 - 18:47 by TosiaraT

SupportQuestion2014x07x18x232230

Question Is there a mechanism to timestamp the file with milliseconds or nanoseconds added to the epoch time? Can motion save a set number of files per motion eve...

NEW - 18 Jul 2014 - 23:24 by JoshuaPeluso

SupportQuestion2014x07x23x222301

Question Can motion support RSTP? I have an IP camera, and it appears I may need to use RSTP for access. Paste in your error messages, config settings, terminal ...

r2 - 26 Sep 2014 - 18:16 by TosiaraT

SupportQuestion2014x07x26x122429

Question Hi i want to set up a home surveillance system, with a raspberry pie for each camera in the house. if i run motion on each one of them and assign them al...

r2 - 26 Sep 2014 - 18:15 by TosiaraT

SupportQuestion2014x07x29x072815

Question The "Motion Download Files" section mentions motion (and ffmpeg) as yum installable packages from rpmfusion. I've enabled epel and rpmfusion, and inst...

r3 - 28 Sep 2014 - 13:56 by TosiaraT

SupportQuestion2014x08x19x145310

Question This is an enhancement request. Please make it so that target_dir will accept date conversion specifiers, such as %Y, %m, and %d, so that I can store mo...

r2 - 30 Sep 2014 - 15:32 by TosiaraT

SupportQuestion2014x08x25x113449

Question Hi. I'm using debian 7.6.0 Motion create new files in specific folder with owner root and group "motion", but groups permisions are only access. I can ch...

r2 - 30 Sep 2014 - 15:11 by TosiaraT

SupportQuestion2014x09x03x222705

Question Is it possible to update the same(!) image file by snapshot somehow? i.e. /home/user/Images/test1.jpg Something like: avconv i rtsp://admin:12345@192.16...

r2 - 26 Sep 2014 - 18:07 by TosiaraT

SupportQuestion2014x09x14x141506

Question I've gone through a number of set up help sites, and no matter what I do, I can't get Motion to save any type of movie file. I'm trying to save to avi, b...

r2 - 26 Sep 2014 - 18:03 by TosiaraT

SupportQuestion2014x09x15x182600

Question I'm using motion to do a snapshot every 24 hours. Everything works great. But, the snapshot occurs at 1900 hours every day, and I would like to change it...

r2 - 26 Sep 2014 - 17:53 by TosiaraT

SupportQuestion2014x09x17x194341

Question Hi, I'm running suse 13.1 with kernel 3.11.6 4. Compiling motion fails. I allready set a softlink to a missing include, as i found in this forum. Unfortu...

r3 - 26 Sep 2014 - 17:50 by TosiaraT

SupportQuestion2014x09x27x001428

Question Motion appears to work very well once it connects to a camera but it seems to frequently lose a camera although not the same camera (I have several diffe...

r2 - 27 Sep 2014 - 17:32 by TosiaraT

SupportQuestion2014x09x28x104512

Question Is it possible to change configuration for example brightness, frame rate, ext via php application? Is it any good tutorials about this? I want to make a...

r2 - 28 Sep 2014 - 13:54 by TosiaraT

SupportQuestion2014x09x30x174950

Question Hi..I am newbie in motion. I want to make my own web based security camera application with motion. I want to make an application that can live streaming...

NEW - 30 Sep 2014 - 18:28 by NandaSamudera

SupportQuestion2014x10x03x000559

Question I am building a Nerf Sentry Gun to shoot my co workers:) I am using a Raspberry PI (RPi) for my controller and need a way to create a targeting system. I...

NEW - 03 Oct 2014 - 01:01 by ChrisHinshaw

SupportQuestion2014x10x12x155245

Question Hello, I try to install Motion on Slackware, and i have a lot of mistakes. Can you help me to instal Motion? Paste in your error messages, config setting...

r2 - 12 Apr 2015 - 09:21 by TosiaraT

SupportQuestion2014x10x16x204502

Question Motion works perfect on Ubuntu 14.04 but I messed up something and want therefore to remove motion completely and start the installation again from scrat...

NEW - 16 Oct 2014 - 21:10 by GerhardW

SupportQuestion2014x10x17x125508

Question Hello, I set up motion to capture a video if there is a motion within image of my door cam that works great. The main part of the image consists of the...

NEW - 17 Oct 2014 - 13:09 by RoBra81

SupportQuestion2014x10x21x102158

Question I have the current trunk which supports RTSP, but I haven't been able to interface with my RSTP IP Cam. In motion.conf I'm using netcam_url rtsp://192.1...

r3 - 14 Mar 2015 - 06:39 by TosiaraT

SupportQuestion2014x11x15x115926

Question I installed motion on asuswrt router through optware but when I start with "motion n" I get this error 1 ioctl (VIDIOCGCAP): Invalid argument Paste in...

r2 - 12 Apr 2015 - 08:27 by TosiaraT

SupportQuestion2014x12x02x171122

Question Afternoon there. I am using the latest version of mr dave's motion from git, running on Ubuntu 14.10, which initally runs pretty much successfully. Aft...

r2 - 12 Apr 2015 - 09:14 by TosiaraT

SupportQuestion2014x12x13x040558

Question Hi there, thanks for your work. Motion worked fine with F20. After the update to F21, with the same config file, when run it gives the error message belo...

r2 - 12 Apr 2015 - 09:09 by TosiaraT

SupportQuestion2015x01x09x181454

Question Hi there, it would be nice to have a stable release at some point, motion is great piece of software without equivalent on linux; and it is actively main...

r2 - 12 Apr 2015 - 09:07 by TosiaraT

SupportQuestion2015x01x20x164957

Question Every image collected is spoiled by a number of blocky image artifacts that appear to be where regions of the image have been swapped or currupted. I am ...

r3 - 12 Apr 2015 - 08:51 by TosiaraT

SupportQuestion2015x01x23x222142

Question I try to use the following procedure in order to installa Motion on Centos: "RPM for Fedora on x86/x86 64 Available on RPM Fusion, build without DB sup...

r2 - 12 Apr 2015 - 09:00 by TosiaraT

Number of topics: 50

< Previous Page 37 of 41 Next >