Detailed topic list for Motion Web

Results from Motion web retrieved at 20:11 (GMT)

SupportQuestion2015x12x04x204304

Question I've installed Motion on Ubuntu 14.04 and configured it with my USBcamera (dev/video0). It all works great when I start Motion from the command line (sud...

NEW - 04 Dec 2015 - 20:50 by WayneGregori

SupportQuestion2015x12x06x180232

Question How do I enable the Raw mode output from the API? The wiki page for the api mentions the raw mode, but does not say how to enable it. I found "?output...

NEW - 06 Dec 2015 - 18:29 by SethD

SupportQuestion2015x12x07x212420

Question I've had Motion running for several years, connected to 9 IP cameras. It's all running on a Pogo Plug and has been working fine, until a while back we ha...

NEW - 07 Dec 2015 - 22:22 by DavidPowell

SupportQuestion2015x12x09x034630

Question Hi, I'been working on a project to configure my Raspberry Pi, Motion and Telegram. The idea is to send a message to Telegram on my Android when an event ...

r3 - 17 Dec 2015 - 11:27 by JuanPita

SupportQuestion2015x12x19x202714

Question Hello, I am new to motion and have a question, which I just cannot figure out: When using motion on a boat at a mooring, which slowly turns with the chan...

r2 - 27 Dec 2015 - 06:35 by MdFigley

SupportQuestion2015x12x24x132041

Question When viewing the video is fast moving. If you use codecs mpeg4 or mp4 video file is created from a single frame. What adjusts the speed of the video? dae...

NEW - 24 Dec 2015 - 13:43 by AlexanderYakovlev

SupportQuestion2016x01x05x175049

Question My project is Automatic License Plate Recognition (OpenALPR) to open a gate. I've a Raspberry Pi 2 with integrated cam. So far I managed to install Raspi...

NEW - 06 Jan 2016 - 19:51 by RaymondWarichet

SupportQuestion2016x01x09x223738

Question I'm a complete Linux newbie. I can follow instructions, but cannot generate a single line in terminal, do not know how to tell what version of the OS I'm...

NEW - 10 Jan 2016 - 00:07 by CarlHart

SupportQuestion2016x01x11x185645

NEW - 11 Jan 2016 - 18:57 by BilskerBoo

SupportQuestion2016x01x14x020240

Question I got the server running and everything seems well, but i've got some strange color problem with my webcam. At the beggining I had two problems: 1. I had...

r2 - 08 Feb 2016 - 10:27 by IaMalcolm

SupportQuestion2016x01x22x144706

Question Hi, I'm a complete newbie, trying to install Motion, and it's failing. The output lines on the install messages are included below. It seems to be fail...

NEW - 22 Jan 2016 - 15:30 by MattDunn

SupportQuestion2016x01x26x164001

Question This is my first time using Motion and I am having a interesting issue. Every time I start Motion either one or both of my cameras will register a motion...

NEW - 26 Jan 2016 - 16:44 by MarkMiller31

SupportQuestion2016x01x29x091235

Question Linux GP7 500 3.16.0 4 686 pae #1 SMP Debian 3.16.7 ckt20 1 deb8u3 (2016 01 17) i686 GNU/Linux motion Version 3.2.12 git20140228 Fresh Debian 8 server wi...

NEW - 29 Jan 2016 - 17:53 by JonBaker

SupportQuestion2016x02x07x111529

Question I am using a logitech camera with autofocus. At night the autofocus gets completely confused and leaves the camera wildly out of focus. From command line...

r2 - 09 Feb 2016 - 17:14 by IaMalcolm

SupportQuestion2016x02x10x031834

Question I installed motion (motion Version 3.2.12 git20140228) from the Raspian repository in a newly installed Raspian Jessie image (2016 02 03 raspbian jessie...

r3 - 11 Feb 2016 - 06:29 by JoelK

SupportQuestion2016x02x10x092310

Question Hello! I have a network camera with 1280x720 at a frame rate of 30 but when I activate the frame in motion on 30 runs the video what I in mpeg4 receiving...

NEW - 10 Feb 2016 - 09:28 by SteffenEwald

SupportQuestion2016x02x13x082142

Question Motion is unable to open the video device for a RTSP network stream. At one time it worked, but an update from v4l to v4l2 broke motion. I updated motion...

NEW - 13 Feb 2016 - 08:30 by AllanBogh

SupportQuestion2016x02x24x175519

Question My motion videos pause every second instead of playing smoothly. On a previous install of motion (3.2.12), I did not have this issue. My motion video cap...

NEW - 24 Feb 2016 - 18:09 by JewbixCube

SupportQuestion2016x03x01x193118

Question I have been running 3.1.12 on Lubuntu 12.10 using tw68 v2 driver for 3 years. I have 6 analog cameras attached to an 8 channel pci card. It has been very...

NEW - 01 Mar 2016 - 20:23 by TonySimpson

SupportQuestion2016x03x12x165337

Question Hello In order to make my own video surveillance system i would want to use motion with a raspberry py and an external infrared sensor. I've already find...

NEW - 12 Mar 2016 - 17:05 by JeanEude

SupportQuestion2016x04x06x112400

Question Hi, sorry for starting a new thread, cant seem to add to my previous one. I am using motion Version 3.2.12 git20140228. I have the following settings: o...

NEW - 06 Apr 2016 - 11:33 by StuartBloom

SupportQuestion2016x04x06x200827

Question I'd like to be able to compute the speed of an object, but would need to know the exact time of capture for frames. Is there a way to obtain this from mo...

NEW - 06 Apr 2016 - 20:13 by GatorY

SupportQuestion2016x04x09x032704

Question Is it possible to instruct Motion to create animated GIFs from a series of images taken at motion detection, and then send each GIF once created to the u...

NEW - 09 Apr 2016 - 03:43 by ZamarAcido

SupportQuestion2016x04x18x124606

Question I am trying to configure the Foscam FI9803P V2 camera and it is not working. Hi, My configuration file is: netcam_url http://URL:8094/cgi bin/CGIProxy.fc...

NEW - 18 Apr 2016 - 13:01 by ManuelBesoain

SupportQuestion2016x04x24x063011

Question I'm with debian os. I've made a ".motion" directory for motion.conf file and for saving captures but parameters from motion.conf file are not available a...

NEW - 24 Apr 2016 - 12:29 by VavinCavent

SupportQuestion2016x05x10x231619

Question I have an ELEC IP camera that I want to add to motion eye. I have a url for viewing the stream, and I can get it to work in VLC. rtsp://192.168.x.x:554/h...

NEW - 11 May 2016 - 01:59 by BryceLunt

SupportQuestion2016x05x21x103116

Question Hi motion community/developers, I need to know which one is the suggested version for ffmpeg that is supposed to work correctly with the current trunk ve...

NEW - 21 May 2016 - 10:38 by RiccardoB

SupportQuestion2016x05x22x143917

Question Hi, I'm trying to set Motion to use .local domains, but Motion doesn't resolve the address. It works only using the IP address. the mjpeg stream address ...

NEW - 22 May 2016 - 14:54 by DanielFarfan

SupportQuestion2016x06x06x194128

Question I recently purchased a Zmodo DVR (ZMD DX SIN8). It has H.264 video available on Port 9000 and can connect up to 8 cameras. I searched this Wiki but I d...

NEW - 06 Jun 2016 - 19:49 by BillS

SupportQuestion2016x06x12x113740

Question I am trying to connect to motion stream via ipv6. ipv4 with VLC works fine. How do I need to set the address in VLC/Chromium ? http:// fd00:xxxx:xxx:xxxx...

NEW - 12 Jun 2016 - 11:57 by JanSundermeyer

SupportQuestion2016x06x29x074837

Question Hi, I want to use Motion Stream URL in WebGL Context Three.js. But, I can't because it seems Motion Web Server doesn't support CORS feature itself. So ...

NEW - 29 Jun 2016 - 07:52 by KimMinSu

SupportQuestion2016x07x29x173843

Question I am seeing corrupted images triggering motion detection. It does not always happen and not easy to reproduce, but it does trigger motion detection and I...

NEW - 29 Jul 2016 - 17:46 by MishaBirman

SupportQuestion2016x08x03x133804

Question I just bought a simple network camera, the TP Link NC200 (UN). I managed to discover the still images and am able to download them using wget. I tried to...

NEW - 03 Aug 2016 - 14:50 by SvenWallage

SupportQuestion2016x08x21x151007

Question I installed Motion Motioneye from the terminal with apt get .... How can i update to the latest release of both programs WITHOUT losing my settings? ap...

NEW - 21 Aug 2016 - 15:14 by WolframFischer

SupportQuestion2016x09x02x163613

Question Was wondering if there is or some one could compile a specific Help file for webcam or ip based video. So many cams are now ip based and use various stre...

NEW - 02 Sep 2016 - 16:54 by DavidHorner

SupportQuestion2016x10x01x180650

Question I have a problem to run motion with logitech c270. I've got 2 errors in logfile: mjpegtoyuv420p: Corrupt image ... continue and Device doesn't support VI...

NEW - 01 Oct 2016 - 18:22 by GenaBaklofen

SupportQuestion2016x11x11x050932

Question I wanna save pictures just around locate positions. Environment Motion version: 3.2.12 ffmpeg version: Libraries: ffmpeg, mysql, pos...

NEW - 11 Nov 2016 - 05:13 by YushinSuzuki

SupportQuestion2016x11x14x195716

Question I don't have ffmpeg installed on my raspbian OS, because it does not seem to be used in debian anymore. The fork 'libav tools' is available though. I wou...

NEW - 14 Nov 2016 - 20:30 by RicardoBirwe

SupportQuestion2016x11x15x081032

Question hi, is possible to manage multiple ipcam? is like the solution for usb? (motion.conf motion2.conf). Thanks Environment Motion version: 4 ff...

NEW - 15 Nov 2016 - 08:34 by RaffaeleDebbi

SupportQuestion2017x01x02x173706

Question i am trying to find the http access logs for the motion webserver. where can they be found? Environment Motion version: 3.2.12 ffmpeg versio...

NEW - 02 Jan 2017 - 17:42 by RobertPellegrini

SupportQuestion2017x01x10x085248

Question I have been running a remote webcam for a number of years. I have been having problems with Logitech cameras locking up to give a gray screen. I have b...

NEW - 10 Jan 2017 - 08:58 by DazzConway

SupportQuestion2017x01x24x210839

Question Hello everybody, thanks in advance for your help. Please be patient with me i am not good at linux and not experienced with raspi either :( here is my qu...

NEW - 24 Jan 2017 - 21:38 by ThaninSchultheis

SupportQuestion2017x01x25x185146

Question Hi, First thanks for your app, it's very performant and customizable! My problem is that the video produced after a motion detection is not "correct". I ...

NEW - 25 Jan 2017 - 19:07 by FloD

SupportQuestion2017x01x27x203854

Question Hi, my ipcam strams the video with rtsp. VLC is playing the stream without problems when i enter the url: rtsp://192.168.1.43:554/11 in motion.conf i ent...

NEW - 27 Jan 2017 - 21:08 by HennerK

SupportQuestion2017x02x20x160943

Question Hello, I plugged in a webcam (sudo lsusb) "Logitech, Inc. Quickcam E2500 series" on my Rapsberry PI3. It works correctly with motion v3.2.12, but the web...

NEW - 20 Feb 2017 - 16:22 by NicoMesa

SupportQuestion2017x03x17x072122

Question Hi. I have been trying to get a single JPEG image from running motion, but I only get MJPEG. Is there a HTTP call with what I could ask just for a snapsh...

NEW - 17 Mar 2017 - 07:24 by JermyHollew32332

SupportQuestion2017x03x21x080028

Question motion.conf on thread1.conf: videodevice /dev/video0 text_left CAMERA 1 target_dir /home/pi/webcam/camera1 stream_port 9061 stream_auth_method 1 stream_...

NEW - 21 Mar 2017 - 08:17 by SuburSubekti

SupportQuestion2017x03x23x131350

Question Hello ! I am trying to use a motion with a ComOnyx CO L221 camera. On official site in support is written: The correct spelling of the request for JPEG f...

NEW - 23 Mar 2017 - 13:36 by RamilMukhtarov

SupportQuestion2017x03x30x200844

Question Hi there. I am trying to record audio at the same time as video, based on when motion is detected. I have tried using arecord, as listed elsewhere in thi...

NEW - 30 Mar 2017 - 20:32 by JoPitts

SupportQuestion2017x05x21x225901

Question We are looking to get images from our camera through RTSP. In our config file, we entered the rtsp address: rtsp://admin:123456@192.168.137.110/live/ch0 ...

NEW - 21 May 2017 - 23:14 by JohnLaboe

Number of topics: 50

< Previous Page 39 of 41 Next >