Motion - Support Question 2015x 04x 22x 174829

Green screen only from Wanscam.

Question

How to solve green only image? Camera is a Wanscam a foscam clone I believe. First camera thread working fine. Second green image.
[2] End of camera connect string.
[2] netcam_setup_html: about to try to connect, time #0
[1] netcam_connect with no keepalive, new socket created fd 3
[2] netcam_connect, disconnecting netcam since keep-alive not set.
[2] netcam_connect with no keepalive, new socket created fd 5
[2] Received first header ('HTTP/1.1 200 OK')
[2] Received first header ('Server: GoaHead')
[2] Received first header ('Tue, 12 Jun 2012 01:56:34 GMT')
[2] Received first header ('Content-Type:image/jpeg')
[2] Non-streaming camera (keep-alive not set)
[2] Received first header ('Content-Length:21416')
[2] Content-length present
[2] Received first header ('Connection: close')
[2] Found Conn:close header ('Connection: close')
[2] Received first header ('')
[2] netcam_setup_html: connected, going on to read image.
[2] expanding buffer from 0 to 4096 bytes
[2] expanding buffer from 4096 to 8192 bytes
[2] expanding buffer from 8192 to 12288 bytes
[2] expanding buffer from 12288 to 16384 bytes
[2] expanding buffer from 16384 to 20480 bytes
[1] Received first header ('HTTP/1.1 200 OK')
[1] Received first header ('Server: Netwave IP Camera')
[1] Received first header ('Date: Wed, 22 Apr 2015 18:28:07 GMT')
[1] Received first header ('Accept-Ranges: bytes')
[1] Received first header ('Connection: close')
[1] Found Conn:close header ('Connection: close')
[1] Received first header ('Content-Type: multipart/x-mixed-replace;boundary=ipcamera')
[1] Streaming camera
[1] Boundary string [ipcamera]
[1] Received first header ('')
[2] expanding buffer from 20480 to 24576 bytes
[2] netcam_read_html_jpeg disconnecting netcam since keep-alive not set.
[2] netcam_output_message: Invalid SOS parameters for sequential JPEG
[2] netcam_init_jpeg: jpeg_error 2
[2] netcam_get_dimensions: JFIF_marker NOT PRESENT ret 2
[2] Resizing pre_capture buffer to 1 items
[2] Camera handler thread [3]  started
[2] netcam_connect, disconnecting netcam since keep-alive not set.
[2] netcam_connect with no keepalive, new socket created fd 5
[2] netcam_next called with no data in buffer
[2] vid_return_code 6
[1] Found image header record
[1] netcam_setup_html: connected, going on to read image.
[1] expanding buffer from 0 to 4096 bytes
[1] expanding buffer from 4096 to 8192 bytes
[1] expanding buffer from 8192 to 12288 bytes
[1] expanding buffer from 12288 to 16384 bytes
[1] Potential split boundary - 1447 chars flushed, 1 re-positioned
[1] expanding buffer from 16384 to 20480 bytes
[1] expanding buffer from 20480 to 24576 bytes
[1] expanding buffer from 24576 to 28672 bytes
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_get_dimensions: JFIF_marker IS PRESENT ret 0
[1] Resizing pre_capture buffer to 1 items
[1] Camera handler thread [4]  started
[1] Found image header record
[1] expanding buffer from 0 to 4096 bytes
[1] netcam_next called with no data in buffer
[1] vid_return_code 6
[1] expanding buffer from 4096 to 8192 bytes
[1] expanding buffer from 8192 to 12288 bytes
[2] Received first header ('HTTP/1.1 200 OK')
[2] Received first header ('Server: GoaHead')
[2] Received first header ('Tue, 12 Jun 2012 01:56:34 GMT')
[2] Received first header ('Content-Type:image/jpeg')
[2] Non-streaming camera (keep-alive not set)
[2] Received first header ('Content-Length:21320')
[2] Content-length present
[2] Received first header ('Connection: close')
[2] Found Conn:close header ('Connection: close')
[2] Received first header ('')
[2] expanding buffer from 0 to 4096 bytes
[2] expanding buffer from 4096 to 8192 bytes
[1] expanding buffer from 12288 to 16384 bytes
[1] expanding buffer from 16384 to 20480 bytes
[1] expanding buffer from 20480 to 24576 bytes
[2] expanding buffer from 8192 to 12288 bytes
[1] expanding buffer from 24576 to 28672 bytes
[2] expanding buffer from 12288 to 16384 bytes
[2] expanding buffer from 16384 to 20480 bytes
[1] Calculated frame time 95602.601562
[1] Found image header record
[1] expanding buffer from 0 to 4096 bytes
[1] Potential split boundary - 766 chars flushed, 1 re-positioned
[2] expanding buffer from 20480 to 24576 bytes
[2] Calculated frame time 464857.593750
[2] netcam_read_html_jpeg disconnecting netcam since keep-alive not set.
[1] expanding buffer from 4096 to 8192 bytes
[1] expanding buffer from 8192 to 12288 bytes
[1] expanding buffer from 12288 to 16384 bytes
[1] expanding buffer from 16384 to 20480 bytes
[1] expanding buffer from 20480 to 24576 bytes
[1] expanding buffer from 24576 to 28672 bytes
[1] Calculated frame time 90687.343750
[1] netcam_proc_jpeg: processing jpeg image - content length 26972
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Calculated frame time 90684.812500
[1] netcam_proc_jpeg: processing jpeg image - content length 26984
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] netcam_proc_jpeg: processing jpeg image - content length 26972
[1] Calculated frame time 93675.328125
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[2] netcam_proc_jpeg: processing jpeg image - content length 21320
[2] netcam_connect, disconnecting netcam since keep-alive not set.
[2] netcam_output_message: Invalid SOS parameters for sequential JPEG
[2] netcam_connect with no keepalive, new socket created fd 5
[2] netcam_init_jpeg: jpeg_error 2
[2] netcam_proc_jpeg: ret 2
[2] vid_return_code 2
[1] netcam_proc_jpeg: processing jpeg image - content length 26984
[2] Received first header ('HTTP/1.1 200 OK')
[2] Received first header ('Server: GoaHead')
[2] Received first header ('Tue, 12 Jun 2012 01:56:34 GMT')
[2] Received first header ('Content-Type:image/jpeg')
[2] Non-streaming camera (keep-alive not set)
[2] Received first header ('Content-Length:21312')
[2] Content-length present
[2] Received first header ('Connection: close')
[2] Found Conn:close header ('Connection: close')
[2] Received first header ('')
[2] expanding buffer from 0 to 4096 bytes
[2] expanding buffer from 4096 to 8192 bytes
[1] Calculated frame time 98757.796875
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[2] expanding buffer from 8192 to 12288 bytes
[2] expanding buffer from 12288 to 16384 bytes
[2] expanding buffer from 16384 to 20480 bytes
[2] expanding buffer from 20480 to 24576 bytes
[2] Calculated frame time 459398.343750
[2] netcam_read_html_jpeg disconnecting netcam since keep-alive not set.
[1] Found image header record
[1] Calculated frame time 94832.820312
[1] Found image header record
[1] netcam_proc_jpeg: processing jpeg image - content length 26976
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Potential split boundary - 1447 chars flushed, 1 re-positioned
[1] Calculated frame time 94045.234375
[1] Found image header record
[1] Calculated frame time 90338.210938
[1] netcam_proc_jpeg: processing jpeg image - content length 26964
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 26976
[1] Found image header record
[1] Calculated frame time 101149.992188
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[0] DEBUG-2 threads_running 4 motion_threads_running 2 , finish 0
[1] Found image header record
[2] netcam_proc_jpeg: processing jpeg image - content length 21312
[2] netcam_connect, disconnecting netcam since keep-alive not set.
[2] netcam_connect with no keepalive, new socket created fd 5
[2] netcam_output_message: Invalid SOS parameters for sequential JPEG
[2] netcam_init_jpeg: jpeg_error 2
[2] netcam_proc_jpeg: ret 2
[2] vid_return_code 2
[2] Received first header ('HTTP/1.1 200 OK')
[2] Received first header ('Server: GoaHead')
[2] Received first header ('Tue, 12 Jun 2012 01:56:34 GMT')
[2] Received first header ('Content-Type:image/jpeg')
[2] Non-streaming camera (keep-alive not set)
[2] Received first header ('Content-Length:21384')
[2] Content-length present
[2] Received first header ('Connection: close')
[2] Found Conn:close header ('Connection: close')
[2] Received first header ('')
[2] Calculated frame time 460613.718750
[2] netcam_read_html_jpeg disconnecting netcam since keep-alive not set.
[1] netcam_proc_jpeg: processing jpeg image - content length 26964
[1] Calculated frame time 101784.992188
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_output_message: Corrupt JPEG data: 1 extraneous bytes before marker 0xd9
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] netcam_proc_jpeg: processing jpeg image - content length 26964
[1] Calculated frame time 103022.492188
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] netcam_proc_jpeg: processing jpeg image - content length 26972
[1] Calculated frame time 108096.546875
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Calculated frame time 104587.695312
[1] netcam_proc_jpeg: processing jpeg image - content length 26960
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[2] netcam_proc_jpeg: processing jpeg image - content length 21384
[2] netcam_connect, disconnecting netcam since keep-alive not set.
[2] netcam_connect with no keepalive, new socket created fd 5
[2] netcam_output_message: Invalid SOS parameters for sequential JPEG
[2] netcam_init_jpeg: jpeg_error 2
[2] netcam_proc_jpeg: ret 2
[2] vid_return_code 2
[2] event_ffmpeg_newfile FPS 2
[2] ffmpeg_open FPS 2
[2] File of type 8 saved to: /root/cam2/01-20150422192807.avi
[2] Received first header ('HTTP/1.1 200 OK')
[2] Received first header ('Server: GoaHead')
[2] Received first header ('Tue, 12 Jun 2012 01:56:34 GMT')
[2] Received first header ('Content-Type:image/jpeg')
[2] Non-streaming camera (keep-alive not set)
[2] Received first header ('Content-Length:21480')
[2] Content-length present
[2] Received first header ('Connection: close')
[2] Found Conn:close header ('Connection: close')
[2] Received first header ('')
[2] Calculated frame time 464078.343750
[2] netcam_read_html_jpeg disconnecting netcam since keep-alive not set.
[1] netcam_proc_jpeg: processing jpeg image - content length 26972
[1] Calculated frame time 107305.421875
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Calculated frame time 105415.679688
[1] netcam_proc_jpeg: processing jpeg image - content length 26984
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_output_message: Corrupt JPEG data: 1 extraneous bytes before marker 0xd9
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Calculated frame time 105847.414062
[1] netcam_proc_jpeg: processing jpeg image - content length 26980
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Calculated frame time 103280.273438
[1] netcam_proc_jpeg: processing jpeg image - content length 26936
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] netcam_proc_jpeg: processing jpeg image - content length 26980
[1] Calculated frame time 106047.750000
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[0] DEBUG-2 threads_running 4 motion_threads_running 2 , finish 0
[2] netcam_proc_jpeg: processing jpeg image - content length 21480
[2] netcam_connect, disconnecting netcam since keep-alive not set.
[2] netcam_connect with no keepalive, new socket created fd 5
[2] netcam_output_message: Invalid SOS parameters for sequential JPEG
[2] netcam_init_jpeg: jpeg_error 2
[2] netcam_proc_jpeg: ret 2
[2] vid_return_code 2
[2] Received first header ('HTTP/1.1 200 OK')
[2] Received first header ('Server: GoaHead')
[2] Received first header ('Tue, 12 Jun 2012 01:56:34 GMT')
[2] Received first header ('Content-Type:image/jpeg')
[2] Non-streaming camera (keep-alive not set)
[2] Received first header ('Content-Length:21304')
[2] Content-length present
[2] Received first header ('Connection: close')
[2] Found Conn:close header ('Connection: close')
[2] Received first header ('')
[2] Calculated frame time 467496.000000
[2] netcam_read_html_jpeg disconnecting netcam since keep-alive not set.
[1] Calculated frame time 104566.171875
[1] netcam_proc_jpeg: processing jpeg image - content length 27032
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] netcam_proc_jpeg: processing jpeg image - content length 26900
[1] Calculated frame time 109587.453125
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Calculated frame time 105434.804688
[1] netcam_proc_jpeg: processing jpeg image - content length 26964
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] netcam_proc_jpeg: processing jpeg image - content length 26920
[1] Calculated frame time 109566.226562
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Calculated frame time 107004.203125
[1] netcam_proc_jpeg: processing jpeg image - content length 26944
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[2] netcam_proc_jpeg: processing jpeg image - content length 21304
[2] netcam_connect, disconnecting netcam since keep-alive not set.
[2] netcam_connect with no keepalive, new socket created fd 5
[2] netcam_output_message: Invalid SOS parameters for sequential JPEG
[2] netcam_init_jpeg: jpeg_error 2
[2] netcam_proc_jpeg: ret 2
[2] vid_return_code 2
[2] Received first header ('HTTP/1.1 200 OK')
[2] Received first header ('Server: GoaHead')
[2] Received first header ('Tue, 12 Jun 2012 01:56:34 GMT')
[2] Received first header ('Content-Type:image/jpeg')
[2] Non-streaming camera (keep-alive not set)
[2] Received first header ('Content-Length:21216')
[2] Content-length present
[2] Received first header ('Connection: close')
[2] Found Conn:close header ('Connection: close')
[2] Received first header ('')
[2] Calculated frame time 470769.000000
[2] netcam_read_html_jpeg disconnecting netcam since keep-alive not set.
[1] Found image header record
[1] Calculated frame time 107321.281250
[1] Found image header record
[1] netcam_proc_jpeg: processing jpeg image - content length 27008
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_output_message: Corrupt JPEG data: 1 extraneous bytes before marker 0xd9
[1] netcam_image_conv: jpeg_error 0
[1] Calculated frame time 102074.054688
[1] netcam_proc_jpeg: processing jpeg image - content length 27040
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Calculated frame time 103219.453125
[1] netcam_proc_jpeg: processing jpeg image - content length 26956
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Potential split boundary - 1447 chars flushed, 1 re-positioned
[1] netcam_proc_jpeg: processing jpeg image - content length 27040
[1] Calculated frame time 107693.007812
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Calculated frame time 103717.804688
[0] DEBUG-2 threads_running 4 motion_threads_running 2 , finish 0
[2] netcam_proc_jpeg: processing jpeg image - content length 21216
[2] netcam_connect, disconnecting netcam since keep-alive not set.
[2] netcam_connect with no keepalive, new socket created fd 5
[2] netcam_output_message: Invalid SOS parameters for sequential JPEG
[2] netcam_init_jpeg: jpeg_error 2
[2] netcam_proc_jpeg: ret 2
[2] vid_return_code 2
[1] netcam_proc_jpeg: processing jpeg image - content length 26988
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_output_message: Corrupt JPEG data: 1 extraneous bytes before marker 0xd9
[1] netcam_image_conv: jpeg_error 0
[2] Received first header ('HTTP/1.1 200 OK')
[2] Received first header ('Server: GoaHead')
[2] Received first header ('Tue, 12 Jun 2012 01:56:34 GMT')
[2] Received first header ('Content-Type:image/jpeg')
[2] Non-streaming camera (keep-alive not set)
[2] Received first header ('Content-Length:21224')
[2] Content-length present
[2] Received first header ('Connection: close')
[2] Found Conn:close header ('Connection: close')
[2] Received first header ('')
[2] Calculated frame time 474525.500000
[2] netcam_read_html_jpeg disconnecting netcam since keep-alive not set.
[1] Found image header record
[1] netcam_proc_jpeg: processing jpeg image - content length 27024
[1] Calculated frame time 108337.523438
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Calculated frame time 106707.570312
[1] netcam_proc_jpeg: processing jpeg image - content length 26972
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] netcam_proc_jpeg: processing jpeg image - content length 26908
[1] Calculated frame time 110417.312500
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] Found image header record
[1] netcam_image_conv: jpeg_error 0
[1] Calculated frame time 104814.484375
[1] Found image header record
[1] netcam_proc_jpeg: processing jpeg image - content length 27012
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[2] netcam_proc_jpeg: processing jpeg image - content length 21224
[2] netcam_connect, disconnecting netcam since keep-alive not set.
[2] netcam_connect with no keepalive, new socket created fd 5
[2] netcam_output_message: Invalid SOS parameters for sequential JPEG
[2] netcam_init_jpeg: jpeg_error 2
[2] netcam_proc_jpeg: ret 2
[2] vid_return_code 2
[1] Calculated frame time 103900.132812
[2] Received first header ('HTTP/1.1 200 OK')
[2] Received first header ('Server: GoaHead')
[2] Received first header ('Tue, 12 Jun 2012 01:56:34 GMT')
[2] Received first header ('Content-Type:image/jpeg')
[2] Non-streaming camera (keep-alive not set)
[2] Received first header ('Content-Length:21216')
[2] Content-length present
[2] Received first header ('Connection: close')
[2] Found Conn:close header ('Connection: close')
[2] Received first header ('')
[2] Calculated frame time 476831.062500
[2] netcam_read_html_jpeg disconnecting netcam since keep-alive not set.
[1] netcam_proc_jpeg: processing jpeg image - content length 26972
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Calculated frame time 106774.218750
[1] netcam_proc_jpeg: processing jpeg image - content length 26948
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Calculated frame time 104956.593750
[1] netcam_proc_jpeg: processing jpeg image - content length 26972
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Potential split boundary - 1447 chars flushed, 1 re-positioned
[1] Calculated frame time 105031.335938
[1] netcam_proc_jpeg: processing jpeg image - content length 26964
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] netcam_proc_jpeg: processing jpeg image - content length 26972
[1] Calculated frame time 107912.703125
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[0] DEBUG-2 threads_running 4 motion_threads_running 2 , finish 0
[2] netcam_proc_jpeg: processing jpeg image - content length 21216
[2] netcam_connect, disconnecting netcam since keep-alive not set.
[2] netcam_connect with no keepalive, new socket created fd 5
[2] netcam_output_message: Invalid SOS parameters for sequential JPEG
[2] netcam_init_jpeg: jpeg_error 2
[2] netcam_proc_jpeg: ret 2
[2] vid_return_code 2
[1] Found image header record
[2] Received first header ('HTTP/1.1 200 OK')
[2] Received first header ('Server: GoaHead')
[2] Received first header ('Tue, 12 Jun 2012 01:56:34 GMT')
[2] Received first header ('Content-Type:image/jpeg')
[2] Non-streaming camera (keep-alive not set)
[2] Received first header ('Content-Length:21352')
[2] Content-length present
[2] Received first header ('Connection: close')
[2] Found Conn:close header ('Connection: close')
[2] Received first header ('')
[2] Calculated frame time 480669.968750
[2] netcam_read_html_jpeg disconnecting netcam since keep-alive not set.
[1] Calculated frame time 105420.531250
[1] netcam_proc_jpeg: processing jpeg image - content length 26972
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Calculated frame time 104916.281250
[1] netcam_proc_jpeg: processing jpeg image - content length 27000
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Calculated frame time 102614.351562
[1] netcam_proc_jpeg: processing jpeg image - content length 27020
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Potential split boundary - 1447 chars flushed, 1 re-positioned
[1] Calculated frame time 102273.617188
[1] Found image header record
[1] netcam_proc_jpeg: processing jpeg image - content length 26908
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Calculated frame time 101482.257812
[1] netcam_proc_jpeg: processing jpeg image - content length 26900
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_output_message: Corrupt JPEG data: 1 extraneous bytes before marker 0xd9
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[2] netcam_proc_jpeg: processing jpeg image - content length 21352
[2] netcam_connect, disconnecting netcam since keep-alive not set.
[2] netcam_connect with no keepalive, new socket created fd 5
[2] netcam_output_message: Invalid SOS parameters for sequential JPEG
[2] netcam_init_jpeg: jpeg_error 2
[2] netcam_proc_jpeg: ret 2
[2] vid_return_code 2
[2] Received first header ('HTTP/1.1 200 OK')
[2] Received first header ('Server: GoaHead')
[2] Received first header ('Tue, 12 Jun 2012 01:56:34 GMT')
[2] Received first header ('Content-Type:image/jpeg')
[2] Non-streaming camera (keep-alive not set)
[2] Received first header ('Content-Length:21408')
[2] Content-length present
[2] Received first header ('Connection: close')
[2] Found Conn:close header ('Connection: close')
[2] Received first header ('')
[2] Calculated frame time 482964.468750
[2] netcam_read_html_jpeg disconnecting netcam since keep-alive not set.
[1] Calculated frame time 103518.734375
[1] netcam_proc_jpeg: processing jpeg image - content length 26964
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_output_message: Corrupt JPEG data: 2 extraneous bytes before marker 0xd9
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Calculated frame time 102666.062500
[1] netcam_proc_jpeg: processing jpeg image - content length 26972
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Calculated frame time 102945.554688
[1] netcam_proc_jpeg: processing jpeg image - content length 26952
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_output_message: Corrupt JPEG data: 2 extraneous bytes before marker 0xd9
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Calculated frame time 102515.500000
[1] netcam_proc_jpeg: processing jpeg image - content length 26964
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Calculated frame time 101426.750000
[1] Found image header record
[0] DEBUG-2 threads_running 4 motion_threads_running 2 , finish 0
[1] netcam_proc_jpeg: processing jpeg image - content length 26956
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_output_message: Corrupt JPEG data: 1 extraneous bytes before marker 0xd9
[1] netcam_image_conv: jpeg_error 0
[2] netcam_proc_jpeg: processing jpeg image - content length 21408
[2] netcam_connect, disconnecting netcam since keep-alive not set.
[2] netcam_connect with no keepalive, new socket created fd 5
[2] netcam_output_message: Invalid SOS parameters for sequential JPEG
[2] netcam_init_jpeg: jpeg_error 2
[2] netcam_proc_jpeg: ret 2
[2] vid_return_code 2
[2] Received first header ('HTTP/1.1 200 OK')
[2] Received first header ('Server: GoaHead')
[2] Received first header ('Tue, 12 Jun 2012 01:56:34 GMT')
[2] Received first header ('Content-Type:image/jpeg')
[2] Non-streaming camera (keep-alive not set)
[2] Received first header ('Content-Length:21392')
[2] Content-length present
[2] Received first header ('Connection: close')
[2] Found Conn:close header ('Connection: close')
[2] Received first header ('')
[1] Calculated frame time 99344.476562
[2] Calculated frame time 484553.937500
[2] netcam_read_html_jpeg disconnecting netcam since keep-alive not set.
[1] Found image header record
[1] netcam_proc_jpeg: processing jpeg image - content length 26944
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Calculated frame time 99244.625000
[1] Found image header record
[1] netcam_proc_jpeg: processing jpeg image - content length 26996
[1] netcam_init_jpeg: jpeg_error 0
[1] Calculated frame time 95339.062500
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Potential split boundary - 1447 chars flushed, 1 re-positioned
[1] netcam_proc_jpeg: processing jpeg image - content length 27004
[1] netcam_init_jpeg: jpeg_error 0
[1] Calculated frame time 96266.257812
[1] netcam_output_message: Corrupt JPEG data: 2 extraneous bytes before marker 0xd9
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Potential split boundary - 1447 chars flushed, 1 re-positioned
[1] netcam_proc_jpeg: processing jpeg image - content length 26888
[1] netcam_init_jpeg: jpeg_error 0
[1] Calculated frame time 96632.132812
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] netcam_proc_jpeg: processing jpeg image - content length 27000
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Calculated frame time 98697.015625
[2] netcam_proc_jpeg: processing jpeg image - content length 21392
[2] netcam_connect, disconnecting netcam since keep-alive not set.
[2] netcam_connect with no keepalive, new socket created fd 5
[2] netcam_output_message: Invalid SOS parameters for sequential JPEG
[2] netcam_init_jpeg: jpeg_error 2
[2] netcam_proc_jpeg: ret 2
[2] vid_return_code 2
[2] Received first header ('HTTP/1.1 200 OK')
[2] Received first header ('Server: GoaHead')
[2] Received first header ('Tue, 12 Jun 2012 01:56:34 GMT')
[2] Received first header ('Content-Type:image/jpeg')
[2] Non-streaming camera (keep-alive not set)
[2] Received first header ('Content-Length:21296')
[2] Content-length present
[2] Received first header ('Connection: close')
[2] Found Conn:close header ('Connection: close')
[2] Received first header ('')
[2] Calculated frame time 484071.656250
[2] netcam_read_html_jpeg disconnecting netcam since keep-alive not set.
[1] Found image header record
[1] netcam_proc_jpeg: processing jpeg image - content length 26904
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Calculated frame time 101223.710938
[1] netcam_proc_jpeg: processing jpeg image - content length 26928
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Potential split boundary - 1447 chars flushed, 1 re-positioned
[1] Calculated frame time 104181.843750
[1] Found image header record
[1] netcam_proc_jpeg: processing jpeg image - content length 26956
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Calculated frame time 99523.460938
[1] Found image header record
[1] netcam_proc_jpeg: processing jpeg image - content length 26860
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Calculated frame time 99993.218750
[1] Found image header record
[0] DEBUG-2 threads_running 4 motion_threads_running 2 , finish 0
[1] netcam_proc_jpeg: processing jpeg image - content length 26880
[1] netcam_init_jpeg: jpeg_error 0
[1] Calculated frame time 96713.398438
[1] netcam_output_message: Corrupt JPEG data: 1 extraneous bytes before marker 0xd9
[1] netcam_image_conv: jpeg_error 0
[2] netcam_proc_jpeg: processing jpeg image - content length 21296
[2] netcam_connect, disconnecting netcam since keep-alive not set.
[2] netcam_connect with no keepalive, new socket created fd 5
[2] netcam_output_message: Invalid SOS parameters for sequential JPEG
[2] netcam_init_jpeg: jpeg_error 2
[2] netcam_proc_jpeg: ret 2
[2] vid_return_code 2
[2] Received first header ('HTTP/1.1 200 OK')
[2] Received first header ('Server: GoaHead')
[2] Received first header ('Tue, 12 Jun 2012 01:56:34 GMT')
[2] Received first header ('Content-Type:image/jpeg')
[2] Non-streaming camera (keep-alive not set)
[2] Received first header ('Content-Length:21152')
[2] Content-length present
[2] Received first header ('Connection: close')
[2] Found Conn:close header ('Connection: close')
[2] Received first header ('')
[2] Calculated frame time 486037.687500
[2] netcam_read_html_jpeg disconnecting netcam since keep-alive not set.
[1] Found image header record
[1] Calculated frame time 96520.359375
[1] netcam_proc_jpeg: processing jpeg image - content length 27044
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Calculated frame time 97278.226562
[1] netcam_proc_jpeg: processing jpeg image - content length 26956
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_output_message: Corrupt JPEG data: 1 extraneous bytes before marker 0xd9
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] netcam_proc_jpeg: processing jpeg image - content length 27044
[1] Calculated frame time 98573.906250
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] netcam_proc_jpeg: processing jpeg image - content length 26956
[1] Found image header record
[1] Calculated frame time 106840.117188
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_output_message: Corrupt JPEG data: 1 extraneous bytes before marker 0xd9
[1] netcam_image_conv: jpeg_error 0
[2] netcam_proc_jpeg: processing jpeg image - content length 21152
[2] netcam_connect, disconnecting netcam since keep-alive not set.
[2] netcam_connect with no keepalive, new socket created fd 5
[2] netcam_output_message: Invalid SOS parameters for sequential JPEG
[2] netcam_init_jpeg: jpeg_error 2
[2] netcam_proc_jpeg: ret 2
[2] vid_return_code 2
[2] Received first header ('HTTP/1.1 200 OK')
[2] Received first header ('Server: GoaHead')
[2] Received first header ('Tue, 12 Jun 2012 01:56:34 GMT')
[2] Received first header ('Content-Type:image/jpeg')
[2] Non-streaming camera (keep-alive not set)
[2] Received first header ('Content-Length:21048')
[2] Content-length present
[2] Received first header ('Connection: close')
[2] Found Conn:close header ('Connection: close')
[2] Received first header ('')
[1] Found image header record
[2] Calculated frame time 487672.218750
[2] netcam_read_html_jpeg disconnecting netcam since keep-alive not set.
[1] netcam_proc_jpeg: processing jpeg image - content length 26992
[1] Calculated frame time 106329.406250
[1] netcam_init_jpeg: ***new pic delay successful***
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
^C[1] Calculated frame time 102454.765625
[1] netcam_proc_jpeg: processing jpeg image - content length 26972
[1] netcam_init_jpeg: jpeg_error 0
[1] netcam_fill_input_buffer: **fake EOI inserted**
[1] netcam_output_message: Corrupt JPEG data: premature end of data segment
[1] netcam_image_conv: jpeg_error 0
[1] Found image header record
[1] Thread exiting
[1] Calling vid_close() from motion_cleanup
[1] Calculated frame time 107907.390625
[1] netcam camera handler: finish set, exiting
[0] DEBUG-2 threads_running 2 motion_threads_running 1 , finish 1
[2] netcam_proc_jpeg: processing jpeg image - content length 21048
[2] netcam_connect, disconnecting netcam since keep-alive not set.
[2] netcam_connect with no keepalive, new socket created fd 3
[2] netcam_output_message: Invalid SOS parameters for sequential JPEG
[2] netcam_init_jpeg: jpeg_error 2
[2] netcam_proc_jpeg: ret 2
[2] vid_return_code 2
[2] Received first header ('HTTP/1.1 200 OK')
[2] Received first header ('Server: GoaHead')
[2] Received first header ('Tue, 12 Jun 2012 01:56:34 GMT')
[2] Received first header ('Content-Type:image/jpeg')
[2] Non-streaming camera (keep-alive not set)
[2] Received first header ('Content-Length:21208')
[2] Content-length present
[2] Received first header ('Connection: close')
[2] Found Conn:close header ('Connection: close')
[2] Received first header ('')
[2] Calculated frame time 489218.187500
[2] netcam_read_html_jpeg disconnecting netcam since keep-alive not set.
[2] Thread exiting
[2] Calling vid_close() from motion_cleanup
[2] netcam camera handler: finish set, exiting
[0] DEBUG-1 threads_running 0 motion_threads_running 0 , finish 1
[0] Motion terminating
root@cams:~ #

netcam_url http://192.168.1.14/snapshot.cgi
target_dir /root/cam2
#snapshot_filename %v-%Y%m%d%H%M%S-snapshot
movie_filename %v-%Y%m%d%H%M%S
#timelapse_filename %Y%m%d-timelapse
ffmpeg_cap_new on
text_left Admin-Dept
netcam_tolerant_check off
output_all on
framerate 2
netcam_http keep_alive

# Rename this distribution example file to motion.conf
#
# This config file was generated by motion 3.2.12


############################################################
# Daemon
############################################################

# Start in daemon (background) mode and release terminal (default: off)
daemon on
output_all off
output_normal off
output_motion off
# File to store the process ID, also called pid file. (default: not defined)
process_id_file /var/run/motion.pid

############################################################
# Basic Setup Mode
############################################################

# Start in Setup-Mode, daemon disabled. (default: off)
setup_mode off

###########################################################
# Capture device options
############################################################

# Videodevice to be used for capturing  (default /dev/video0)
# for FreeBSD default is /dev/bktr0
;videodevice /dev/video0
#process_id_file /root/motion.pid

# v4l2_palette allows to choose preferable palette to be use by motion
# to capture from those supported by your videodevice. (default: 8)
# E.g. if your videodevice supports both V4L2_PIX_FMT_SBGGR8 and
# V4L2_PIX_FMT_MJPEG then motion will by default use V4L2_PIX_FMT_MJPEG.
# Setting v4l2_palette to 1 forces motion to use V4L2_PIX_FMT_SBGGR8
# instead.
#
# Values :
# V4L2_PIX_FMT_SN9C10X : 0  'S910'
# V4L2_PIX_FMT_SBGGR8  : 1  'BA81'
# V4L2_PIX_FMT_MJPEG   : 2  'MJPEG'
# V4L2_PIX_FMT_JPEG    : 3  'JPEG'
# V4L2_PIX_FMT_RGB24   : 4  'RGB3'
# V4L2_PIX_FMT_UYVY    : 5  'UYVY'
# V4L2_PIX_FMT_YUYV    : 6  'YUYV'
# V4L2_PIX_FMT_YUV422P : 7  '422P'
# V4L2_PIX_FMT_YUV420  : 8  'YU12'
v4l2_palette 8

# Tuner device to be used for capturing using tuner as source (default /dev/tuner0)
# This is ONLY used for FreeBSD. Leave it commented out for Linux
; tunerdevice /dev/tuner0

# The video input to be used (default: 8)
# Should normally be set to 0 or 1 for video/TV cards, and 8 for USB cameras
input 8

# The video norm to use (only for video capture and TV tuner cards)
# Values: 0 (PAL), 1 (NTSC), 2 (SECAM), 3 (PAL NC no colour). Default: 0 (PAL)
norm 0

# The frequency to set the tuner to (kHz) (only for TV tuner cards) (default: 0)
frequency 0

# Rotate image this number of degrees. The rotation affects all saved images as
# well as mpeg movies. Valid values: 0 (default = no rotation), 90, 180 and 270.
rotate 0

# Image width (pixels). Valid range: Camera dependent, default: 352
width 640

# Image height (pixels). Valid range: Camera dependent, default: 288
height 480

# Maximum number of frames to be captured per second.
# Valid range: 2-100. Default: 100 (almost no limit).
framerate 10

# Minimum time in seconds between capturing picture frames from the camera.
# Default: 0 = disabled - the capture rate is given by the camera framerate.
# This option is used when you want to capture images at a rate lower than 2 per second.
minimum_frame_time 0

# URL to use if you are using a network camera, size will be autodetected (incl http:// ftp:// or file:///)
# Must be a URL that returns single jpeg pictures or a raw mjpeg stream. Default: Not defined
; netcam_url value

# Username and password for network camera (only if required). Default: not defined
# Syntax is user:password
; netcam_userpass value

# The setting for keep-alive of network socket, should improve performance on compatible net cameras.
# 1.0:         The historical implementation using HTTP/1.0, closing the socket after each http request.
# keep_alive:  Use HTTP/1.0 requests with keep alive header to reuse the same connection.
# 1.1:         Use HTTP/1.1 requests that support keep alive as default.
# Default: 1.0
; netcam_http 1.0

# URL to use for a netcam proxy server, if required, e.g. "http://myproxy".
# If a port number other than 80 is needed, use "http://myproxy:1234".
# Default: not defined
; netcam_proxy value

# Set less strict jpeg checks for network cameras with a poor/buggy firmware.
# Default: off
netcam_tolerant_check off

# Let motion regulate the brightness of a video device (default: off).
# The auto_brightness feature uses the brightness option as its target value.
# If brightness is zero auto_brightness will adjust to average brightness value 128.
# Only recommended for cameras without auto brightness
auto_brightness off

# Set the initial brightness of a video device.
# If auto_brightness is enabled, this value defines the average brightness level
# which Motion will try and adjust to.
# Valid range 0-255, default 0 = disabled
brightness 0

# Set the contrast of a video device.
# Valid range 0-255, default 0 = disabled
contrast 0

# Set the saturation of a video device.
# Valid range 0-255, default 0 = disabled
saturation 0

# Set the hue of a video device (NTSC feature).
# Valid range 0-255, default 0 = disabled
hue 0


############################################################
# Round Robin (multiple inputs on same video device name)
############################################################

# Number of frames to capture in each roundrobin step (default: 1)
roundrobin_frames 1

# Number of frames to skip before each roundrobin step (default: 1)
roundrobin_skip 1

# Try to filter out noise generated by roundrobin (default: off)
switchfilter off


############################################################
# Motion Detection Settings:
############################################################

# Threshold for number of changed pixels in an image that
# triggers motion detection (default: 1500)
threshold 1500

# Automatically tune the threshold down if possible (default: off)
threshold_tune off

# Noise threshold for the motion detection (default: 32)
noise_level 32

# Automatically tune the noise threshold (default: on)
noise_tune on

# Despeckle motion image using (e)rode or (d)ilate or (l)abel (Default: not defined)
# Recommended value is EedDl. Any combination (and number of) of E, e, d, and D is valid.
# (l)abeling must only be used once and the 'l' must be the last letter.
# Comment out to disable
despeckle EedDl

# Detect motion in predefined areas (1 - 9). Areas are numbered like that:  1 2 3
# A script (on_area_detected) is started immediately when motion is         4 5 6
# detected in one of the given areas, but only once during an event.        7 8 9
# One or more areas can be specified with this option. (Default: not defined)
; area_detect value

# PGM file to use as a sensitivity mask.
# Full path name to. (Default: not defined)
; mask_file value

# Dynamically create a mask file during operation (default: 0)
# Adjust speed of mask changes from 0 (off) to 10 (fast)
smart_mask_speed 0

# Ignore sudden massive light intensity changes given as a percentage of the picture
# area that changed intensity. Valid range: 0 - 100 , default: 0 = disabled
lightswitch 0

# Picture frames must contain motion at least the specified number of frames
# in a row before they are detected as true motion. At the default of 1, all
# motion is detected. Valid range: 1 to thousands, recommended 1-5
minimum_motion_frames 1

# Specifies the number of pre-captured (buffered) pictures from before motion
# was detected that will be output at motion detection.
# Recommended range: 0 to 5 (default: 0)
# Do not use large values! Large values will cause Motion to skip video frames and
# cause unsmooth mpegs. To smooth mpegs use larger values of post_capture instead.
pre_capture 0

# Number of frames to capture after motion is no longer detected (default: 0)
post_capture 0

# Gap is the seconds of no motion detection that triggers the end of an event
# An event is defined as a series of motion images taken within a short timeframe.
# Recommended value is 60 seconds (Default). The value 0 is allowed and disables
# events causing all Motion to be written to one single mpeg file and no pre_capture.
gap 60

# Maximum length in seconds of an mpeg movie
# When value is exceeded a new mpeg file is created. (Default: 0 = infinite)
max_mpeg_time 0

# Always save images even if there was no motion (default: off)
output_all off


############################################################
# Image File Output
############################################################

# Output 'normal' pictures when motion is detected (default: on)
# Valid values: on, off, first, best, center
# When set to 'first', only the first picture of an event is saved.
# Picture with most motion of an event is saved when set to 'best'.
# Picture with motion nearest center of picture is saved when set to 'center'.
# Can be used as preview shot for the corresponding movie.
output_normal off

# Output pictures with only the pixels moving object (ghost images) (default: off)
output_motion off

# The quality (in percent) to be used by the jpeg compression (default: 75)
quality 75

# Output ppm images instead of jpeg (default: off)
ppm off


############################################################
# FFMPEG related options
# Film (mpeg) file output, and deinterlacing of the video input
# The options movie_filename and timelapse_filename are also used
# by the ffmpeg feature
############################################################

# Use ffmpeg to encode mpeg movies in realtime (default: off)
ffmpeg_cap_new on

# Use ffmpeg to make movies with only the pixels moving
# object (ghost images) (default: off)
ffmpeg_cap_motion off

# Use ffmpeg to encode a timelapse movie
# Default value 0 = off - else save frame every Nth second
ffmpeg_timelapse 0

# The file rollover mode of the timelapse video
# Valid values: hourly, daily (default), weekly-sunday, weekly-monday, monthly, manual
ffmpeg_timelapse_mode daily

# Bitrate to be used by the ffmpeg encoder (default: 400000)
# This option is ignored if ffmpeg_variable_bitrate is not 0 (disabled)
ffmpeg_bps 500000

# Enables and defines variable bitrate for the ffmpeg encoder.
# ffmpeg_bps is ignored if variable bitrate is enabled.
# Valid values: 0 (default) = fixed bitrate defined by ffmpeg_bps,
# or the range 2 - 31 where 2 means best quality and 31 is worst.
ffmpeg_variable_bitrate 0

# Codec to used by ffmpeg for the video compression.
# Timelapse mpegs are always made in mpeg1 format independent from this option.
# Supported formats are: mpeg1 (ffmpeg-0.4.8 only), mpeg4 (default), and msmpeg4.
# mpeg1 - gives you files with extension .mpg
# mpeg4 or msmpeg4 - gives you files with extension .avi
# msmpeg4 is recommended for use with Windows Media Player because
# it requires no installation of codec on the Windows client.
# swf - gives you a flash film with extension .swf
# flv - gives you a flash video with extension .flv
# ffv1 - FF video codec 1 for Lossless Encoding ( experimental )
# mov - QuickTime ( testing )
ffmpeg_video_codec mpeg4

# Use ffmpeg to deinterlace video. Necessary if you use an analog camera
# and see horizontal combing on moving objects in video or pictures.
# (default: off)
ffmpeg_deinterlace off


############################################################
# Snapshots (Traditional Periodic Webcam File Output)
############################################################

# Make automated snapshot every N seconds (default: 0 = disabled)
snapshot_interval 0


############################################################
# Text Display
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second, %T = HH:MM:SS,
# %v = event, %q = frame number, %t = thread (camera) number,
# %D = changed pixels, %N = noise level, \n = new line,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event - do not use with text_event!
# You can put quotation marks around the text to allow
# leading spaces
############################################################

# Locate and draw a box around the moving object.
# Valid values: on, off and preview (default: off)
# Set to 'preview' will only draw a box in preview_shot pictures.
locate off

# Draws the timestamp using same options as C function strftime(3)
# Default: %Y-%m-%d\n%T = date in ISO format and time in 24 hour clock
# Text is placed in lower right corner
text_right %Y-%m-%d\n%T-%q

# Draw a user defined text on the images using same options as C function strftime(3)
# Default: Not defined = no text
# Text is placed in lower left corner
; text_left CAMERA %t

# Draw the number of changed pixed on the images (default: off)
# Will normally be set to off except when you setup and adjust the motion settings
# Text is placed in upper right corner
text_changes off

# This option defines the value of the special event conversion specifier %C
# You can use any conversion specifier in this option except %C. Date and time
# values are from the timestamp of the first image in the current event.
# Default: %Y%m%d%H%M%S
# The idea is that %C can be used filenames and text_left/right for creating
# a unique identifier for each event.
text_event %Y%m%d%H%M%S

# Draw characters at twice normal size on images. (default: off)
text_double off


############################################################
# Target Directories and filenames For Images And Films
# For the options snapshot_, jpeg_, mpeg_ and timelapse_filename
# you can use conversion specifiers
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = thread (camera) number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# Quotation marks round string are allowed.
############################################################

# Target base directory for pictures and films
# Recommended to use absolute path. (Default: current working directory)
target_dir /usr/local/apache2/htdocs/cam1

# File path for snapshots (jpeg or ppm) relative to target_dir
# Default: %v-%Y%m%d%H%M%S-snapshot
# Default value is equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-snapshot
# File extension .jpg or .ppm is automatically added so do not include this.
# Note: A symbolic link called lastsnap.jpg created in the target_dir will always
# point to the latest snapshot, unless snapshot_filename is exactly 'lastsnap'
snapshot_filename %v-%Y%m%d%H%M%S-snapshot

# File path for motion triggered images (jpeg or ppm) relative to target_dir
# Default: %v-%Y%m%d%H%M%S-%q
# Default value is equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-%q
# File extension .jpg or .ppm is automatically added so do not include this
# Set to 'preview' together with best-preview feature enables special naming
# convention for preview shots. See motion guide for details
jpeg_filename %v-%Y%m%d%H%M%S-%q

# File path for motion triggered ffmpeg films (mpeg) relative to target_dir
# Default: %v-%Y%m%d%H%M%S
# Default value is equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H%M%S
# File extension .mpg or .avi is automatically added so do not include this
# This option was previously called ffmpeg_filename
movie_filename %v-%Y%m%d%H%M%S

# File path for timelapse mpegs relative to target_dir
# Default: %Y%m%d-timelapse
# Default value is near equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d-timelapse
# File extension .mpg is automatically added so do not include this
timelapse_filename %Y%m%d-timelapse


############################################################
# Live Webcam Server
############################################################

# The mini-http server listens to this port for requests (default: 0 = disabled)
;webcam_port 8081

# Quality of the jpeg (in percent) images produced (default: 50)
;webcam_quality 50

# Output frames at 1 fps when no motion is detected and increase to the
# rate given by webcam_maxrate when motion is detected (default: off)
;webcam_motion off

# Maximum framerate for webcam streams (default: 1)
;webcam_maxrate 1

# Restrict webcam connections to localhost only (default: on)
;webcam_localhost on

# Limits the number of images per connection (default: 0 = unlimited)
# Number can be defined by multiplying actual webcam rate by desired number of seconds
# Actual webcam rate is the smallest of the numbers framerate and webcam_maxrate
;webcam_limit 0


############################################################
# HTTP Based Control
############################################################

# TCP/IP port for the http server to listen on (default: 0 = disabled)
;control_port 8080

# Restrict control connections to localhost only (default: on)
;control_localhost on

# Output for http server, select off to choose raw text plain (default: on)
;control_html_output on

# Authentication for the http based control. Syntax username:password
# Default: not defined (Disabled)
; control_authentication username:password


############################################################
# Tracking (Pan/Tilt)
############################################################

# Type of tracker (0=none (default), 1=stepper, 2=iomojo, 3=pwc, 4=generic, 5=uvcvideo)
# The generic type enables the definition of motion center and motion size to
# be used with the conversion specifiers for options like on_motion_detected
track_type 0

# Enable auto tracking (default: off)
track_auto off

# Serial port of motor (default: none)
; track_port value

# Motor number for x-axis (default: 0)
track_motorx 0

# Motor number for y-axis (default: 0)
track_motory 0

# Maximum value on x-axis (default: 0)
track_maxx 0

# Maximum value on y-axis (default: 0)
track_maxy 0

# ID of an iomojo camera if used (default: 0)
track_iomojo_id 0

# Angle in degrees the camera moves per step on the X-axis
# with auto-track (default: 10)
# Currently only used with pwc type cameras
track_step_angle_x 10

# Angle in degrees the camera moves per step on the Y-axis
# with auto-track (default: 10)
# Currently only used with pwc type cameras
track_step_angle_y 10

# Delay to wait for after tracking movement as number
# of picture frames (default: 10)
track_move_wait 10

# Speed to set the motor to (stepper motor option) (default: 255)
track_speed 255

# Number of steps to make (stepper motor option) (default: 40)
track_stepsize 40


############################################################
# External Commands, Warnings and Logging:
# You can use conversion specifiers for the on_xxxx commands
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = thread (camera) number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# %f = filename with full path
# %n = number indicating filetype
# Both %f and %n are only defined for on_picture_save,
# on_movie_start and on_movie_end
# Quotation marks round string are allowed.
############################################################

# Do not sound beeps when detecting motion (default: on)
# Note: Motion never beeps when running in daemon mode.
quiet on

# Command to be executed when an event starts. (default: none)
# An event starts at first motion detected after a period of no motion defined by gap
; on_event_start value

# Command to be executed when an event ends after a period of no motion
# (default: none). The period of no motion is defined by option gap.
; on_event_end value

# Command to be executed when a picture (.ppm|.jpg) is saved (default: none)
# To give the filename as an argument to a command append it with %f
; on_picture_save value

# Command to be executed when a motion frame is detected (default: none)
; on_motion_detected value

# Command to be executed when motion in a predefined area is detected
# Check option 'area_detect'.   (default: none)
; on_area_detected value

# Command to be executed when a movie file (.mpg|.avi) is created. (default: none)
# To give the filename as an argument to a command append it with %f
; on_movie_start value

# Command to be executed when a movie file (.mpg|.avi) is closed. (default: none)
# To give the filename as an argument to a command append it with %f
; on_movie_end value

# Command to be executed when a camera can't be opened or if it is lost
# NOTE: There is situations when motion doesn't detect a lost camera!
# It depends on the driver, some drivers don't detect a lost camera at all
# Some hang the motion thread. Some even hang the PC! (default: none)
; on_camera_lost value

############################################################
# Common Options For MySQL and PostgreSQL database features.
# Options require the MySQL/PostgreSQL options to be active also.
############################################################

# Log to the database when creating motion triggered image file  (default: on)
sql_log_image on

# Log to the database when creating a snapshot image file (default: on)
sql_log_snapshot on

# Log to the database when creating motion triggered mpeg file (default: off)
sql_log_mpeg off

# Log to the database when creating timelapse mpeg file (default: off)
sql_log_timelapse off

# SQL query string that is sent to the database
# Use same conversion specifiers has for text features
# Additional special conversion specifiers are
# %n = the number representing the file_type
# %f = filename with full path
# Default value:
# insert into security(camera, filename, frame, file_type, time_stamp, text_event) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')
sql_query insert into security(camera, filename, frame, file_type, time_stamp, event_time_stamp) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')


############################################################
# Database Options For MySQL
############################################################

# Mysql database to log to (default: not defined)
; mysql_db value

# The host on which the database is located (default: localhost)
; mysql_host value

# User account name for MySQL database (default: not defined)
; mysql_user value

# User password for MySQL database (default: not defined)
; mysql_password value


############################################################
# Database Options For PostgreSQL
############################################################

# PostgreSQL database to log to (default: not defined)
; pgsql_db value

# The host on which the database is located (default: localhost)
; pgsql_host value

# User account name for PostgreSQL database (default: not defined)
; pgsql_user value

# User password for PostgreSQL database (default: not defined)
; pgsql_password value

# Port on which the PostgreSQL database is located (default: 5432)
; pgsql_port 5432


############################################################
# Video Loopback Device (vloopback project)
############################################################

# Output images to a video4linux loopback device
# The value '-' means next available (default: not defined)
; video_pipe value

# Output motion images to a video4linux loopback device
# The value '-' means next available (default: not defined)
; motion_video_pipe value


##############################################################
# Thread config files - One for each camera.
# Except if only one camera - You only need this config file.
# If you have more than one camera you MUST define one thread
# config file for each camera in addition to this config file.
##############################################################

# Remember: If you have more than one camera you must have one
# thread file for each camera. E.g. 2 cameras requires 3 files:
# This motion.conf file AND thread1.conf and thread2.conf.
# Only put the options that are unique to each camera in the
# thread config files.
thread /usr/local/etc/thread1.conf
thread /usr/local/etc/thread2.conf
; thread /usr/local/etc/thread3.conf
; thread /usr/local/etc/thread4.conf

Environment

Motion version: 3.2.12
ffmpeg version: 2.3.6_2,1
Libraries: ffmpeg, mysql, postgresql
Server OS: FreeNas ( FreeBSD 9.2-RELEASE-p12)
-- JamesRoots - 22 Apr 2015

Answer

Topic revision: r1 - 22 Apr 2015, JamesRoots
Copyright © 1999-2017 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Please do not email Kenneth for support questions (read why). Use the Support Requests page or join the Mailing List.
This website only use harmless session cookies. See Cookie Policy for details. By using this website you accept the use of these cookies.