50 recent changes in Motion Web retrieved at 11:04 (GMT)
SupportQuestion2015x05x05x175317
Question The system packages Debian 8 jessie no package ffmpeg only libav. Motion output has many jpg files. What should be done to rectify the situation? Paste i...
NEW - 05 May 2015 - 18:05 by IgorLimonov
SupportQuestion2015x05x02x074200
Question Hi all, i was trying out motion on my pi with a Logitech QuickCam. When i try to connect to the ip i just see a grey screen with 'unable to open video d...
NEW - 02 May 2015 - 07:45 by BartChaltin
SupportQuestion2015x04x28x143147
Question Is it possible to use an external script to show text on the screen? I would like to pull data from an external script and have it display in the event_...
NEW - 28 Apr 2015 - 14:48 by KeithSchmitt
SupportQuestion2015x04x22x174829
Question How to solve green only image? Camera is a Wanscam a foscam clone I believe. First camera thread working fine. Second green image. 2 End of camera conn...
NEW - 22 Apr 2015 - 18:51 by JamesRoots
SupportQuestion2015x04x22x121417
Question Motion was running fine for quite a long time built against ffmpeg 1.2.6 and with these patches: https://github.com/mapmot/moverlay/tree/master/media vid...
NEW - 22 Apr 2015 - 12:27 by StefanBruda
SupportQuestion2015x04x20x154721
Question Hi to all ! I have read this post http://www.lavrsen.dk/foswiki/bin/view/Motion/FeatureRequest2009x06x23x045436 and I have tried to download the motion G...
r3 - 22 Apr 2015 - 09:56 by EmilioDefranco
SupportQuestion2013x11x05x183558
Question After installing motion trunk I noticed that images were no longer being saved as before. That is, previously if I set post_capure to 25 and the gap to s...
r4 - 22 Apr 2015 - 08:50 by DavidRobb
SupportQuestion2015x04x13x222017
Question hello, i am getting an error while starting motion on a rpi. /etc/init.d/motion: 2: /etc/default/motion: logfile: not found motion file start_motion_daem...
r4 - 21 Apr 2015 - 21:02 by ArnaudCognard
SupportQuestion2014x05x06x220454
Question Hello, I installed the Motion package on my RPi (v2, with Debian) with a RPi camera using the instructions given at http://www.codeproject.com/Articles/6...
r4 - 12 Apr 2015 - 09:42 by TosiaraT
SupportQuestion2011x10x06x163706
Question My Motion runs for a while, generally around an hour then stops. The cameras are analog connected to an easycap device. I've just upgraded to 3.2.12 Any ...
r3 - 12 Apr 2015 - 09:23 by TosiaraT
SupportQuestion2014x10x12x155245
Question Hello, I try to install Motion on Slackware, and i have a lot of mistakes. Can you help me to instal Motion? Paste in your error messages, config setting...
r2 - 12 Apr 2015 - 09:21 by TosiaraT
SupportQuestion2014x12x02x171122
Question Afternoon there. I am using the latest version of mr dave's motion from git, running on Ubuntu 14.10, which initally runs pretty much successfully. Aft...
r2 - 12 Apr 2015 - 09:14 by TosiaraT
SupportQuestion2014x12x13x040558
Question Hi there, thanks for your work. Motion worked fine with F20. After the update to F21, with the same config file, when run it gives the error message belo...
r2 - 12 Apr 2015 - 09:09 by TosiaraT
SupportQuestion2015x01x09x181454
Question Hi there, it would be nice to have a stable release at some point, motion is great piece of software without equivalent on linux; and it is actively main...
r2 - 12 Apr 2015 - 09:07 by TosiaraT
SupportQuestion2015x01x23x222142
Question I try to use the following procedure in order to installa Motion on Centos: "RPM for Fedora on x86/x86 64 Available on RPM Fusion, build without DB sup...
r2 - 12 Apr 2015 - 09:00 by TosiaraT
SupportQuestion2015x01x29x172936
Question Hi, i've a smartphone android with ip webcam app installed and a debian pc with motion and ffmpeg installed. the smartphone in a url http://myip:8080/pho...
r3 - 12 Apr 2015 - 08:54 by TosiaraT
SupportQuestion2015x01x20x164957
Question Every image collected is spoiled by a number of blocky image artifacts that appear to be where regions of the image have been swapped or currupted. I am ...
r3 - 12 Apr 2015 - 08:51 by TosiaraT
SupportQuestion2015x02x26x122951
Question Hi all , excuse me but I am total noob in unix system so I follow a tutorial for installing motion . this one http://www.instructables.com/id/Raspberry P...
r4 - 12 Apr 2015 - 08:47 by TosiaraT
SupportQuestion2015x03x03x090955
Question Hello ! * I've configured "on_picture_save" to send me email with picture attached when motion detects movement = it works great ! :) * I've confi...
r3 - 12 Apr 2015 - 08:43 by TosiaraT
SupportQuestion2015x03x11x105920
Question Hello Motion support With a little tributaries, has managed to set up the Motion on the new Raspberry Pi 2, which have more resources to deal with than t...
r3 - 12 Apr 2015 - 08:37 by TosiaraT
SupportQuestion2015x03x23x002537
Question I am totally new to RasPi . I have to do this with my NOIR camera module on the B board: Enable the motion detect by sending a signal to an input p...
r2 - 12 Apr 2015 - 08:31 by TosiaraT
SupportQuestion2014x11x15x115926
Question I installed motion on asuswrt router through optware but when I start with "motion n" I get this error 1 ioctl (VIDIOCGCAP): Invalid argument Paste in...
r2 - 12 Apr 2015 - 08:27 by TosiaraT
SupportQuestion2011x01x09x193606
Question Hi, I am running into trouble with this camera in mjpeg mode: v4l2_palette 2 although YUYV works fine but the framerate is too low for the later (10 fps ...
r2 - 12 Apr 2015 - 08:20 by TosiaraT
BugReport2015x03x17x181334
BUG: After a while, some threads die. Actually, I still can access the web server of the cameras and see their picture, just motion lost the connection. Re start...
NEW - 17 Mar 2015 - 18:23 by HolgerJakobs
LinksToMotionWebcams
Links to Working Webcams driven by Motion You are very welcome to add a link and short description of your webcam below. Kenneth Lavrsen's Webcam Kenneth Lavrsen...
r71 - 15 Mar 2015 - 11:07 by JuanPabloDiaz
SupportQuestion2014x10x21x102158
Question I have the current trunk which supports RTSP, but I haven't been able to interface with my RSTP IP Cam. In motion.conf I'm using netcam_url rtsp://192.1...
r3 - 14 Mar 2015 - 06:39 by TosiaraT
FeatureRequest2014x04x10x134646
Feature Request: Description Raspberry Pi is gpu powerful devices but the cpu is equievalent to pentium 2 CPU is the bottleneck So motion software need improvem...
r5 - 13 Mar 2015 - 08:25 by JuergenHausladen
FeatureRequest2015x03x03x212850
Feature Request: Description I hope i didn #39;t overlooked some related suggestion. It would be great, for performance issues, to set a resolution for the moti...
NEW - 03 Mar 2015 - 22:16 by HansMLler
FeatureRequest2015x03x02x153909
Feature Request: Description Hi, nice piece of code, and stable to say first. My idea if one could use in on_picture_save something like ./mycode #37;x...
NEW - 02 Mar 2015 - 16:03 by JohnSmithCZ
MotionHttpAPI
API for HTTP Interface for Motion Output Modes The HTTP Interface have two output modes : * HTML : To use it from a web browser. * RAW : To easily be parse...
r34 - 28 Feb 2015 - 18:01 by AlAl
UmaskGroupPermission
Respect umask and allow group write permission on directories Description of Patch motion was not respecting umask (umask 0002) and allowing group write permissi...
NEW - 25 Feb 2015 - 17:52 by KennethBurgener
SupportQuestion2015x02x03x013740
Question I have been running Motion with a TrendNet IP100 and 2 Foscam 8910W cameras. Everything has been great, my only issue is that I end up with 10 20 images...
r2 - 17 Feb 2015 - 00:49 by AlanFord
SupportQuestion2015x02x09x042621
Question I would like see if my understanding about the sysconfdir configure script parameter is correct. According to http://www.lavrsen.dk/foswiki/bin/view/Mot...
NEW - 09 Feb 2015 - 05:57 by AlanFord
TCPFastOpen
Enable "TCP Fast Open" especially for listening HTTP sockets Description of Patch TCP Fast Open can greatly reduce the latency of TCP connection setup. This espe...
NEW - 27 Jan 2015 - 12:52 by FolkertvanHeusden
GenCam
GenCam Introduction Happy browsing of cam events, your personal utube Detailed Description Attached Files http://22.fi/~jyvae/gencam.tar.gz Installation requi...
r8 - 23 Jan 2015 - 17:38 by JavierMarcon
WebHttpManyThreads
webhttpd for more than 9 threads Introduction The distributed version of motion 3.2.4 fails to set camera status if the camera thread number is more than 9. This...
r6 - 10 Jan 2015 - 21:25 by DavidPowell
FeatureRequest2015x01x07x051255
Feature Request: Description Maybe im going about this all wrong but i have tied all sorts of things. What im trying to do is be able to delete the files create...
NEW - 07 Jan 2015 - 05:13 by DavidJeffery
AvoidNullDereferenceRTSPConnect
Avoid null dereference in rtsp_connect() Description of Patch Avoid a segfault when netcam_url to a rtsp netcam is wrong. Installation of Patch Download the pat...
NEW - 16 Dec 2014 - 11:15 by ChristopheGRENIER
FixMemLeakNetcamRtsp
Fix memor leak when using rtsp camera Description of Patch Fix various memory leak reported by valgrind. Installation of Patch Download the patch file. If it is...
NEW - 16 Dec 2014 - 10:42 by ChristopheGRENIER
FeatureRequest2014x12x13x223108
Feature Request: Description I have a son with epilepsy and I would like to use Motion to detect potential seizures. I have tested that with a raspberry pi came...
NEW - 13 Dec 2014 - 22:31 by MikeC
BugReport2014x12x10x212122
BUG: As mentioned above, motion uses every few seconds more Memory, until it gets killed because of a "out of memory" message in syslog. I can see the memory usa...
NEW - 10 Dec 2014 - 21:34 by ChristopherStein
BugReport2014x12x10x101759
BUG: There is a memory leak in the error path of read_rtsp_image(). It has triggered an Out of Memory. Patch included. diff rup motion/netcam_rtsp.c motion.cgr/...
NEW - 10 Dec 2014 - 10:31 by ChristopheGRENIER
BugReport2014x12x04x135313
BUG: Camera sending 1920 x 1080 fails with: netcam image height (1080) is not modulo 16 A) I tried changing netcam.c where the check occurs to be '% 8' instead o...
r4 - 05 Dec 2014 - 23:36 by GeneC
MotionDetector
dockmotion Introduction A surveillance solution base on Motion and Docker. Detailed Description It's easy and ready to use. Just plug in a webcam and run dockmo...
r2 - 03 Dec 2014 - 13:30 by KeFeiLin
NetcamModulo16Patch
Netcam Modulo 16 Patch Uploaded by Main.KennethLavrsen on behalf of Main.PeterHolik who posted it on the mailing list. Introduction Motion cannot handle image di...
r11 - 23 Nov 2014 - 02:11 by AngelVera
SupportQuestion2014x02x26x164339
Question I was running motion with 2 analog cameras connected to a standard 4 video in audio to usb adapter. (Bus 002 Device 002: ID 05e1:0408 Syntek Semiconduc...
r3 - 11 Nov 2014 - 01:58 by JulioReson
BugReport2014x09x02x113959
BUG: I use motion for my surveillance system and sometimes I get segfault when motion convert YUV420 to JPEG for streaming. I notice that this happens in some ci...
r3 - 10 Nov 2014 - 15:41 by GiovanniLicata
FeatureRequest2012x07x03x113916
Feature Request: Description At night or at a specific time span, lets say from 19:00 to 06:00, motion should automatic change its values threshold and noise_le...
r3 - 27 Oct 2014 - 13:16 by DirkBeer
BugReport2014x08x03x235204
BUG: I am not able to get motion to stream my network cameras. They are all wireless and I have already pre configured each one. I have the Foscam FI8910W and I ...
r2 - 26 Oct 2014 - 22:46 by MikeHoward
SupportQuestion2014x10x17x125508
Question Hello, I set up motion to capture a video if there is a motion within image of my door cam that works great. The main part of the image consists of the...
NEW - 17 Oct 2014 - 13:09 by RoBra81
Number of topics: 50
< Previous Page 8 of 41 Next >
See also:
RSS feed, recent changes with 50, 100, 200, 500, 1000 topics, all changesCopyright © 1999-2025 by the contributing authors.
All material on this collaboration platform is the property of the contributing authors.
Please do not email Kenneth for support questions (read why). Use the Support Requests page or join the Mailing List.
This website only use harmless session cookies. See Cookie Policy for details. By using this website you accept the use of these cookies.
Please do not email Kenneth for support questions (read why). Use the Support Requests page or join the Mailing List.
This website only use harmless session cookies. See Cookie Policy for details. By using this website you accept the use of these cookies.