Detailed topic list for Motion Web

Results from Motion web retrieved at 18:10 (GMT)

FeatureRequest2007x03x12x163538
Feature Request: Description a graphical gui... Main.ThierryC 12 Mar 2007 Follow up Comments See third bullet in MotionMissionStatement Motion is written ...
r4 - 23 Aug 2014 - 17:26 by AnastasiusNadelholz
FeatureRequest2007x03x20x213125
Feature Request: Description Hello, need support for EDICAM IC 1500 will place a raw file Regards Jörg Main.JoergStickdorn 20 Mar 2007 Comments IP Cam name...
r4 - 23 Apr 2007 - 15:18 by AngelCarpintero
FeatureRequest2007x04x07x094356
Feature Request: Description Greetings, motion is amazing! I have 4 sources, each records frames into their own folder and then at the end of the day a perl scr...
NEW - 07 Apr 2007 - 10:14 by RyanFulcher
FeatureRequest2007x04x07x101709
Feature Request: Description Semi related to the various "Lost Signal/Camera" requests FeatureRequest2006x04x08x061905 It might also be helpful if motion were ...
NEW - 07 Apr 2007 - 10:26 by RyanFulcher
FeatureRequest2007x04x12x232027
Feature Request: Description in some installations it would be useful to have the sensitivity Mask disabled during motion events. eg: if i set up a camera in...
r5 - 04 Oct 2007 - 02:16 by LeRoy
FeatureRequest2007x07x03x061451
Feature Request: Description Sorry if already discussed, but I couldnt find any reference. Many a times I dont want to check the whole area for motion, only spe...
r6 - 05 Nov 2007 - 11:20 by JoergWeber
FeatureRequest2007x07x08x091911
Feature Request: Description MJPEG is a better codec for security cameras especially when you need to step though them frame by frame. Since ffmpeg already supp...
r3 - 02 Aug 2007 - 13:08 by SimonW
FeatureRequest2007x07x19x131921
Feature Request: Description I was delighted to notice that the newest version of Motion supports direct encoding to Flash video via FFmpeg. Something I have do...
r9 - 18 Mar 2009 - 14:53 by RomanGaufman
FeatureRequest2007x08x20x044016
Feature Request: Description If there isn't a way already, I think there should be an option where motion can change the user id that it runs under. Similar to ...
r4 - 12 Oct 2007 - 14:05 by AngelCarpintero
FeatureRequest2007x10x25x065125
Feature Request: Description I have a web camera which is connected via Homeplug Ethernet over mains, which reduces the amount of wiring which has to be run to...
NEW - 25 Oct 2007 - 06:57 by JohnLines
FeatureRequest2007x10x31x164251
Feature Request: Description Hello, I use motion as MJPEG streaming software and find it useful. The output is playable on vlc player. I find ways to start Moti...
NEW - 31 Oct 2007 - 17:06 by JpkaJ
FeatureRequest2007x11x19x032318
Feature Request: Description Some webcams and capture cards support many palettes to capture from, righ now motion automatically does selection. There're users ...
r5 - 03 Jun 2008 - 19:41 by KennethLavrsen
FeatureRequest2007x11x19x181541
Feature Request: Description the new feature generates file:// style links which is useless when you're accessing the control port remotely. I would prefer to ...
r12 - 11 Nov 2008 - 20:13 by AngelCarpintero
FeatureRequest2007x11x25x064501
Feature Request: Description The HTML output on motion control isn't valid HTML to some extent. Sample: Thread 1 text_left = Kamera 1 help The li Element...
r2 - 25 Nov 2007 - 10:31 by KennethLavrsen
FeatureRequest2007x12x01x232911
Feature Request: Description Hi I highly appreciate good work already done to motion, its a piece of code which i would write by myself if you haven't done it a...
r2 - 06 Jan 2008 - 20:38 by AngelCarpintero
FeatureRequest2007x12x03x135328
Feature Request: Description As far as I understand labeling (marking movement in all pixels of the same colour in the neighbourhood of changed pixel?) it seems...
r2 - 03 Dec 2007 - 21:37 by JoergWeber
FeatureRequest2007x12x16x132522
Feature Request: Description This was discussed with sack, Lavr and joergw a couple of weeks ago on #motion so I figured I will add an actual feature request o...
r20 - 13 Apr 2008 - 23:33 by AngelCarpintero
FeatureRequest2007x12x31x221921
Feature Request: Description It would be nice to be able to control PTZ Network camera controls. Main.SubnetG 31 Dec 2007 Follow up That's in roadmap alre...
r2 - 04 Jan 2008 - 14:38 by AngelCarpintero
FeatureRequest2008x01x16x222003
Feature Request: Description In debugging a recent problem with an IP9100A (see WorkingDevices) I needed to find out the TCP receive and transmit buffer sizes ...
r3 - 17 Jan 2008 - 22:21 by SimonW
FeatureRequest2008x01x21x123122
Feature Request: Description It might be handy to be able to define alternate dimensions of an image from that at which they were captured. Perhaps this would ...
r2 - 22 Jan 2008 - 08:57 by AngelCarpintero
FeatureRequest2008x02x15x094053
Feature Request: Description It would be great to be able to change the colour of the locate box to red and increase the width a bit for it to be more visible ...
r5 - 06 May 2009 - 15:57 by JoergWeber
FeatureRequest2008x02x21x121900
Feature Request: Description The Allnet 2281 camera is not working with motion 3.2.9: netcam_url http://192.168.1.1/cgi/mjpg/mjpeg.cgi netcam_userpass admin:ad...
r2 - 21 Feb 2008 - 13:43 by AngelCarpintero
FeatureRequest2008x03x18x094405
Feature Request: Description Hi. Rather than using serial ports and dedicated custom protocol for driving X Y steppers, it should be simpler to use parallel po...
r3 - 03 May 2008 - 17:49 by KennethLavrsen
FeatureRequest2008x03x18x191631
Feature Request: Description Hi, I have a netcamera without sound record, but I have a microphone... How I can add the new channel at the final video? Now I la...
r2 - 19 Mar 2008 - 13:34 by RomanGaufman
FeatureRequest2008x03x23x142143
Feature Request: Description I know it was removed in 3.2.7 (as per the docs here) but I found it to be a useful option that cannot be replaced with minimum_fr...
NEW - 23 Mar 2008 - 14:34 by SaC
FeatureRequest2008x03x31x193142
Feature Request: Description I miss a option in motion.conf to disable storage of jpeg files. Or did I missed something? Main.AndreasLindner 31 Mar 2008 F...
r2 - 01 Apr 2008 - 02:21 by AngelCarpintero
FeatureRequest2008x04x17x001820
Feature Request: Description I am currently capturing 10fps (to try and get smooth video). I had a look at the output of motion that shows the changed pixels. ...
r5 - 30 Apr 2008 - 19:37 by DagErlandsson
FeatureRequest2008x05x15x160542
Feature Request: Description It would be great if a motion jpeg can be outputted for first, best or center like for output_normal. Main.RomanGaufman 15 May...
NEW - 15 May 2008 - 16:12 by RomanGaufman
FeatureRequest2008x05x15x161933
Feature Request: Description 1) Currently, oprofile shows motion's alg_despeckle as the second most intensive symbol name on my motion box because I have fps 2...
r3 - 15 Jul 2008 - 19:27 by RomanGaufman
FeatureRequest2008x05x17x211344
Feature Request: Description It would be really nice if motion could create a fifo file for the encoded stream call the option video_fifo :) This way you cou...
r2 - 02 Dec 2010 - 16:44 by RomanGaufman
FeatureRequest2008x05x19x020221
Feature Request: Description It would be great if there was the ability to pass flags like these to the ffmpeg encoding process: g 160 cmp 3 subcmp 3 mbd 2 ...
r4 - 24 Oct 2009 - 02:20 by RomanGaufman
FeatureRequest2008x05x27x174850
Feature Request: Description 1) Currently I have to specify the camera name multiple times in filenames, text_ variables on_camera_lost, etc. It would be great...
NEW - 27 May 2008 - 18:01 by RomanGaufman
FeatureRequest2008x06x14x214513
Feature Request: Description So there is a thread number format specifier, but no name. It'd simply (my) configuration if there was a way to name a camera: cam...
r3 - 15 Jun 2008 - 23:21 by AngelCarpintero
FeatureRequest2008x06x14x215505
Feature Request: Description RAW/HTML is currently implemented via a config file option. This should (could) be supported per request for instance, like this:...
r6 - 16 Jun 2008 - 20:42 by AngelCarpintero
FeatureRequest2008x06x15x130807
Feature Request: Description Nice program, thanks. Most security cameras are low resolution (example 640x480) and it is difficult to positively identify someon...
r6 - 13 Oct 2008 - 08:24 by SimonW
FeatureRequest2008x06x15x145025
Feature Request: Description I have a problem with wind and trees causing motion and so I'm thinking about ways to adjust sensitivity using areas and colors. Fo...
r13 - 30 Sep 2008 - 14:17 by JonZeeff
FeatureRequest2008x06x30x141140
Feature Request: Description Hi, I was wondering if it would be possible to manage priorities for roundrobin cameras ? You would declare some of them more impo...
r4 - 07 Aug 2008 - 09:25 by SimonW
FeatureRequest2008x07x10x131630
Feature Request: link multiple cameras Description it would be a great feature to link some cameras.. so i got a camera inside and outside.. the one outside i c...
r2 - 10 Jul 2008 - 17:59 by AngelCarpintero
FeatureRequest2008x08x04x053843
Feature Request: Description I am looking for support to be added for the Airlink 101 AICN500W Wireless network camera. I am unable to get a a tcpdump from it ...
r4 - 21 Aug 2008 - 04:19 by GarretteGrouwstra
FeatureRequest2008x08x29x012221
Feature Request: Description hi! First sorry my terrible bad english. Could it be posible to encode movies directly as mp4 or mov "hinted" movies ? I'm trying ...
r2 - 30 May 2016 - 12:54 by DmitryK
FeatureRequest2008x09x03x091538
Feature Request: Description We have a very usefull lastsnap.jpg simlink, but what about lastmovie.avi simlink ???... In a web page we can post a link with...
r2 - 07 Sep 2008 - 23:15 by AngelCarpintero
FeatureRequest2008x09x20x184314
Feature Request: Description 1st off, great app.. took a little tweaking to get it to do what I wanted, but its GREAT!!! It would be nice to see a function to a...
NEW - 20 Sep 2008 - 18:52 by MatthewYax
FeatureRequest2008x09x29x182934
Feature Request: Description Hi What i mean is: At this time you can define in the "text_left" %H for Hours, what i need is an function: %cmd1,%cmd2 to display...
r3 - 17 Oct 2008 - 00:28 by AngelCarpintero
FeatureRequest2008x10x15x130110
Feature Request: Description Hi. I tried to start motion with my usb webcam (Logitech, Inc. QuickCam express Plus), and this was the output: 0 Motion 3.2.11 S...
r4 - 22 Oct 2008 - 06:48 by BadanSergiu
FeatureRequest2008x10x16x121007
Feature Request: Description Now we have %s wich gives us the seconds passed since 1970, and we have %q wich gives the frame nr within the second. Unfortunatel...
NEW - 16 Oct 2008 - 15:12 by LaszloVarga
FeatureRequest2008x11x12x132414
Feature Request: Description I think It will be useful if motion detect that image given by camera is TOO DARK (defined by some new parameter) to run some scri...
r4 - 27 Nov 2012 - 02:57 by DazzConway
FeatureRequest2009x02x13x162419
Feature Request: Description I have a system on which I am trying to run 4 usb cameras to capture snapshots and timelapse videos no motion detection. I am tr...
r3 - 14 Feb 2009 - 22:14 by AngelCarpintero
FeatureRequest2009x02x13x182509
Feature Request: Description Would it be possible to add a setting in the config file, where selected functions of motion eg. motion detection etc could be dis...
r3 - 14 Feb 2009 - 22:01 by AngelCarpintero
FeatureRequest2009x03x10x085721
Feature Request: Description It could be interesting to enable wildcards in the threads configuration files to enhance the file system security. For instance, ...
r2 - 15 Mar 2009 - 16:21 by AngelCarpintero
FeatureRequest2009x03x11x194232
Feature Request: Description On startup motion directly start to capture frames and doing things like writing to a database. Somehow my bttv card needs a litll...
r11 - 02 Sep 2009 - 01:29 by TheOtherBug
Number of topics: 50
< Previous Page 15 of 41 Next >

See also the faster WebTopicList

This topic: Motion > WebHome > WebIndex
Topic revision: 19 Aug 2014, KennethLavrsen
Copyright © 1999-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Please do not email Kenneth for support questions (read why). Use the Support Requests page or join the Mailing List.
This website only use harmless session cookies. See Cookie Policy for details. By using this website you accept the use of these cookies.